KGUSS A90 Discrete

KGUSS Topping A90 Discrete Headphone Amplifier Preampuporabniški priročnik za lifier

Model: A90 Discrete

1. Uvod

The KGUSS Topping A90 Discrete is a high-performance headphone amplifier in preamplifier designed for audio enthusiasts. It features fully discrete NFCA (Nested Feedback Composite Amplifier) modules, precise R2R relay volume control, and versatile output options including 6.35mm, 4.4mm balanced, and 4-Pin XLR headphone outputs. This manual provides detailed instructions for setting up, operating, and maintaining your A90 Discrete unit.

KGUSS Topping A90 Discrete Headphone Amplifier Preamplifier in silver finish

Figure 1.1: KGUSS Topping A90 Discrete Headphone Amplifier Preamplifier.

2. Kaj je v škatli

Carefully unpack your A90 Discrete and ensure all components are present:

  • A90 Discrete Unit
  • Daljinski upravljalnik
  • AC kabel
  • 6.35 mm na 3.5 mm adapter
  • Uporabniški priročnik
Contents of the A90 Discrete box including the ampžaga, daljinski upravljalnik, kabli in navodila

Figure 2.1: Package Contents of the A90 Discrete.

Video 2.1: Unboxing the TOPPING A90 Discrete headphone amplifier, showing all included accessories.

3. Izdelek je končanview

3.1 Sprednja plošča

Front panel diagram of the A90 Discrete showing output channel indicator, remote control receiver, power indicator, input channel indicator, volume, 4-Pin-XLR headphone output jack, 4.4mm balanced headphone output jack, 6.35mm headphone output jack, and volume knob/multi-function button.

Slika 3.1: Razporeditev in krmilniki na sprednji plošči.

  • Output Channel Indicator: Displays the active output channel.
  • Sprejemnik daljinskega upravljalnika: For receiving signals from the remote.
  • Indikator moči: Prikazuje stanje napajanja.
  • Input Channel Indicator: Displays the active input channel.
  • obseg: Digital volume display.
  • 4-Pin-XLR Headphone Output Jack: Balanced headphone output.
  • 4.4mm Balanced Headphone Output Jack: Balanced headphone output.
  • 6.35mm Headphone Output Jack: Single-ended headphone output.
  • Gumb za glasnost/večfunkcijski gumb: Controls volume and navigates menus.

3.2 Zadnja plošča

Rear panel diagram of the A90 Discrete showing firmware upgrade interface, extender input interface, balanced XLR input, single-ended RCA input, single-ended RCA output, balanced XLR output, trigger interface, ground lift switch, power input, and power switch.

Slika 3.2: Razporeditev in priključki na zadnji plošči.

  • Firmware Upgrade Interface: For updating device firmware.
  • Extender Input Interface: For connecting external modules like Ext90.
  • Uravnotežen XLR vhod: For balanced audio input.
  • Single-ended RCA Input: For single-ended audio input.
  • Single-ended RCA Output: For single-ended audio output.
  • Uravnotežen izhod XLR: For balanced audio output.
  • Trigger Interface: 12V trigger for synchronized power with other devices.
  • Stikalo za dvig tal: To eliminate ground loop noise.
  • Power Input (AC 100-240V 50/60Hz): Napajanje.
  • Stikalo za vklop: Vklopi/izklopi enoto.

3.3 Daljinski upravljalnik

Remote control layout with buttons for standby, volume up/down, input switching, output switching, user settings, headphone amp gain, mute, OK, and brightness settings.

Slika 3.3: Funkcije daljinskega upravljalnika.

  • Pripravljenost: Vklop/izklop vklopa.
  • Povečanje/zmanjšanje glasnosti: Prilagodi glasnost.
  • Switch to Previous/Next Input: Cycles through input channels.
  • Output Channel Switching: Toggles between headphone amp in predamp izhodi.
  • User Setting 1/2: Prilagodljive nastavitve.
  • Slušalka Amp pridobitev: Adjusts gain level.
  • Mute: Utiša zvočni izhod.
  • Gumb V redu: Potrjuje izbire.
  • Nastavitve svetlosti: Prilagodi svetlost zaslona.

4. Nastavitev

4.1 Napajalni priključek

  1. Prepričajte se, da je stikalo za vklop na zadnji plošči v položaju IZKLOP.
  2. Connect the supplied AC cable to the power input on the rear panel of the A90 Discrete and then to a suitable power outlet.

4.2 Zvočne povezave

The A90 Discrete supports various input and output configurations:

  • Vhodi: Balanced XLR, Single-ended RCA, Extender Input (for optional modules like Ext90).
  • Izhodi: Balanced XLR, Single-ended RCA, 4-Pin-XLR Headphone, 4.4mm Balanced Headphone, 6.35mm Single-ended Headphone.

Connect your audio source (e.g., DAC) to the appropriate input on the A90 Discrete using high-quality cables. Connect your headphones to one of the front panel headphone output jacks or connect to a power amplifier via the rear panel RCA or XLR outputs.

Diagram showing connection of A90 Discrete with a D90SE/D90LE DAC and an optional Ext90 for additional inputs.

Slika 4.1: Nprample connection with a D90SE/D90LE DAC and Ext90.

Video 4.1: Konecview of the TOPPING A90 Discrete Headphone Amplifier, demonstrating various connections and features.

5. Navodila za uporabo

5.1 Vklop/izklop

Flip the power switch on the rear panel to the ON position. The unit will power on. To power off, flip the switch to the OFF position.

5.2 Preklapljanje vhodov/izhodov

  • Preklop vhoda: Press the volume knob on the front panel to cycle through available input channels (XLR, RCA, EXT).
  • Output Switching: Double-click the volume knob on the front panel to switch between headphone amplifier output (HPA), preamplifier output (PRE), or both (PRE+HPA).

5.3 Nadzor glasnosti

Rotate the volume knob on the front panel to adjust the volume. The A90 Discrete uses an R2R volume control composed of relays and resistor networks for precise and matched channel balance.

Notranji view of the A90 Discrete showing the R2R relay volume control components.

Figure 5.1: R2R Relay Volume Control.

A safe volume can be set to avoid sudden loud sounds after power on or input switching.

Front panel display showing volume level and input/output indicators.

Figure 5.2: Digital Volume Display.

5.4 Nastavitve ojačanja

The A90 Discrete offers two gain options to accommodate various headphones:

  • Nizek dobiček: Suitable for high-sensitivity IEMs (In-Ear Monitors).
  • Visok dobiček: For driving full-sized over-ear headphones.

Adjust the gain using the remote control or the multi-function button on the front panel. The ultra-low noise of 0.2uVrms ensures sensitive IEMs do not suffer from noise.

Diagram showing balanced and single-ended gain settings for low and high gain modes.

Figure 5.3: Gain Settings for Balanced and Single-Ended Outputs.

5.5 Predamp Funkcionalnost

The A90 Discrete can function as a dedicated preamplifier. In preamp mode, it delivers the same high performance as the headphone amplifier mode. The 20ohm SE and 40ohm balanced output impedances are suitable for various power amplifiers. You can switch between headphone amp only, preamp only, or simultaneous output from both.

A90 Discrete unit placed between two speakers and a headphone stand, illustrating its use as a preamplifier.

Figure 5.4: A90 Discrete in Preamp Način.

6. Ključne značilnosti

6.1 Fully Discrete NFCA Modules

The A90 Discrete utilizes fully discrete components to redesign the NFCA (Nested Feedback Composite Amplifier) module. It incorporates four built-in NFCA-Discrete modules, each using 39 transistors to form a fully balanced structure. This optimized Voltage Current hybrid feedback architecture, combined with UHGF (Ultra High Gain Feedback) technology, ensures excellent DC and AC performance, resulting in unparalleled distortion and noise performance.

Internal circuit board of the A90 Discrete highlighting the NFCA-Discrete modules.

Slika 6.1: Notranji View of NFCA-Discrete Modules.

6.2 High Output Capability

The A90 Discrete delivers high output voltage, high current, and low output impedance, allowing it to drive a wide range of headphones effectively. High output voltage easily drives high impedance headphones, while high output current provides sufficient power for low-sensitivity headphones. The low output impedance prevents unwanted frequency response effects when driving low-impedance headphones.

A90 Discrete with headphones, illustrating its high output voltage, current, and low impedance capabilities.

Figure 6.2: Driving Various Headphones with A90 Discrete.

6.3 Ground Loop Noise Terminator

To address ground loop noise that may occur when multiple devices are connected, the A90 Discrete includes a GND/LIFT switch. Set it to GND for normal use. If ground loop noise is present, switch it to LIFT to eliminate the noise.

Close-up of the rear panel showing the GND/LIFT switch for ground loop noise termination.

Figure 6.3: Ground Lift Switch.

6.4 12V Trigger Interface

The A90 Discrete is equipped with a 12V Trigger interface, which can be set to active control (Trigger out) or passive control (Trigger in). This allows for synchronized power on/off with other devices equipped with a 12V Trigger interface, simplifying system operation.

Diagram showing the 12V Trigger interface on the rear panel and its connection to other devices.

Figure 6.4: 12V Trigger Interface.

7. Odpravljanje težav

This section addresses common issues you might encounter with your A90 Discrete. For more detailed troubleshooting, refer to the video below.

Video 7.1: TOPPING A90 Discrete Troubleshooting Guide.

Fenomenrešitev
Can't be turned on
  • Preverite napajalni priključek.
  • Preverite, ali je stikalo za vklop na zadnji plošči v položaju ON.
  • Try with another power cable.
  • Try with another power outlet.
The volume too low
  • Press the B button on the remote to switch to volume curve 1.
  • Turn up the volume of the source.
  • Set the headphone gain to high gain by the GAIN button on remote.
  • Turn up the volume of the downstream devices if you are using the Line out output of the unit.
Brez zvoka
  • The device did not power on. Check the power supply.
  • Check that the proper input source is selected. Press the knob to switch input channel.
  • Check the output setting. Double-press the knob to switch output channel.
  • Preverite povezave za vse naprave.
  • Priključne kable vstavite do konca.
  • Check the volume of all devices and whether they are muted.
Hrupno predvajanje
  • Try with other songs.
  • Try to switch to "LIFT" on rear panel.
  • Check to see if the problem is with the source, downstream equipment and cables.
One channel with noise/no output
  • Check to see if the problem is with the source, downstream equipment and cables.
  • You can try swapping the left and right channel connections.
Channel imbalance
  • Check to see if the problem is with the source, downstream equipment and cables.
Daljinski upravljalnik se ne odziva
  • Enable remote control function in the setup menu first.
  • Try to insert two fresh AAA batteries.
  • Aim at the remote control receiver.
  • Bring the remote control close to the device.
  • Use your Android phone's camera to look at the transmitter at the top of the remote; if it doesn't blink when you press the remote button, the remote is defective.
  • If you have more than one Topping device, check that you are using the correct remote control.
Negative and positive voltage abnormal (-2/-3/-4)
  • Please update the firmware first.
  • May be caused by high temperature. Turn the power off, wait for the unit to cool down sufficiently, and then turn the power on again. Please place the unit in a place having good ventilation.
  • Probably overloaded. Try turning down the volume and then reboot the unit.
  • Too low load impedance or short-circuit load. Check the connections with the speaker.
  • Disconnect other devices and reboot. If the problem still persists, your unit may be defective. Please contact the store where you purchased it.
  • Amplifier circuit outputs abnormal DC voltage.
Overload (-5)
  • Turn down the volume of this unit, turn it off and let it cool down for 1 minute before restarting it.
  • Disconnect other devices, turn this unit off and cool it down for 1 minute and then restart it. If the problem still persists, your unit may be defective. Please contact the store where you purchased it.
Firmware related issues (-7, LARGE.TXT, ERRFW.TXT, UNKOWN.TXT, FAILED.TXT)
  • Please re-flash the correct firmware.
  • Reboot the computer or try with another computer for firmware updates.

8. Specifikacije

SpecifikacijaVrednost
voltage240 volta
Največja dobava Voltage240 voltov (AC)
Minimalna dobava Voltage240 volta
Vrsta namestitvePovršinska montaža
Število kanalov4
Izhodna moč19600 vatov
Vrsta materialaSilver, Metal
Specifikacija izpolnjenaCE, Energy Star, FCC, RoHS
ModelA90 Discrete
Blagovna znamkaKGUSS
Število enot1.0 štetje
Detailed specifications table for A90 Discrete Headphone Amplifier in pred-AMP, including THD+N, output level, input sensitivity, output power, and load impedance.

Figure 8.1: A90 Discrete Detailed Specifications.

9. Garancija in podpora

The A90 Discrete is sold by HIFI College. HIFI College offers a 30-day money-back guarantee for any reason and more than a 12-month warranty on all quality defects. They also support 30-day price matching.

For any questions or support, please contact HIFI College directly.

Contact Email: HIFICOLLEGE@gmail.com

© 2023 KGUSS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.