Protmex PT6508 Digital Temperature Humidity Meter

Konec izdelkaview

The Protmex PT6508 is a professional dual-display digital temperature and humidity meter designed for accurate environmental measurements. It features high-precision digital sensors, a clear LCD backlight display, and multiple temperature modes including ambient, dew point, and wet bulb temperature. This device is suitable for a wide range of applications, from HVAC and industrial use to agriculture, meteorology, and general home monitoring.

Figure 1: Protmex PT6508 Digital Temperature Humidity Meter and accessories.

Figure 2: Wide range of applications for the PT6508 meter.

Nastavitev

Before first use, ensure the batteries are correctly installed.

1. Poiščite predal za baterije na zadnji strani naprave.
2. Using a small screwdriver (often included), open the battery compartment cover.
3. Vstavite štiri (4) baterije AAA in pri tem pazite na pravilno polarnost (+/-), kot je označeno v notranjosti predala.
4. Ponovno namestite pokrov prostora za baterije in ga pritrdite z vijakom.
5. Press the green power button to turn on the device.

Naprava je sedaj pripravljena za delovanje.

Navodila za uporabo

Familiarize yourself with the buttons and display functions of your PT6508 meter.

Figure 3: Key components and buttons of the PT6508.

• Vklop/izklop: Pritisnite zeleni gumb za vklop za vklop ali izklop naprave.
• Načini prikaza: The device displays relative humidity (%RH) and temperature. Press the DP/WB button to cycle through different temperature modes:
  • Temperatura okolja: Standard air temperature.
  • Dew Point Temperature (DP): The temperature at which air becomes saturated with water vapor, leading to condensation.
  • Wet Bulb Temperature (WB): The lowest temperature that can be reached by evaporating water into the air.
• Unit Switching (°C/°F): Pritisnite ° C / ° F button to switch the temperature unit between Celsius and Fahrenheit.
• Zadrževanje podatkov (H): Pritisnite in držite H gumb za zamrznitev trenutnega odčitka na zaslonu. Ponovno pritisnite za sprostitev.
• Min/Max Hold (MIN/MAX): Pritisnite MIN / MAX gumb za view the minimum or maximum recorded values since the device was powered on or the function was reset.
• Data Storage (MEM) and Recall (READ):

  The PT6508 can store up to 99 sets of data.

  

  Figure 4: Data recording and recall functionality.

  • To save a reading, press the MEM button. The display will show a memory location number.
  • To recall stored data, press the PREBERI gumb. Uporabite DP/WB (puščica navzgor) in ° C / ° F (down arrow) buttons to navigate through the stored data sets.
  • To clear all stored data, press and hold the MEM button until the memory indicator clears.
• Osvetlitev ozadja: Pritisnite ikona žarnice button to turn the display backlight on or off, improving visibility in low-light conditions.
• Samodejni izklop: To conserve battery life, the device will automatically shut off after 30 minutes of inactivity.

Vzdrževanje

• Čiščenje: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the sensor area clean and free from dust or debris.
• Zamenjava baterije: When the low battery indicator appears on the display, replace all four AAA batteries promptly to ensure accurate readings and continuous operation.
• Shranjevanje: Merilnik shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur. Če ga shranjujete dlje časa, odstranite baterije, da preprečite puščanje.

Odpravljanje težav

Specifikacije

Figure 5: Physical dimensions of the PT6508 meter.

Garancija in podpora

Protmex provides a 12-mesečna garancija kakovosti for this product. If you encounter any issues or have questions, the Protmex support team is available to respond to your requests within 24 hours.

For further assistance or to explore other Protmex products, please visit the Protmex Store.