Pomembne varnostne informacije
Please read and understand all instructions before beginning installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards that can cause property damage or personal injury.
- Pred namestitvijo, vzdrževanjem ali zamenjavo žarnice vedno izklopite glavno stikalo.
- Če niste prepričani o postopku namestitve, se posvetujte s kvalificiranim električarjem.
- Prepričajte se, da so vse električne povezave varne in v skladu z lokalnimi predpisi in uredbami.
- Ne nameščajte v bližini vnetljivih materialov.
- S steklenimi komponentami ravnajte previdno, da preprečite lomljenje in poškodbe.
Navodila za namestitev
Vsebina paketa
Verify that all components are present before beginning installation. The package includes the lamp post assembly, three light fixtures with tempered ripple glass, a dusk-to-dawn sensor, and mounting hardware.
Figure 1: Product Components and Dimensions
Predhodna namestitev
- Ta lamp post is designed for hard-wired electrical connections and is not solar-powered. Ensure a suitable 120V AC power source is available at the installation site.
- Prepare the ground masonry work in advance. The post base is designed to replace previous post bases with an existing bolt spacing of 7.68 inches apart.
- An additional template card is provided for quick positioning during installation.
Montaža in namestitev
- Previdno razpakirajte vse komponente in jih preglejte, ali so morebitne poškodbe.
- Sestavite lamp post sections according to the provided diagrams, ensuring all connections are tight.
- Mount the assembled lamp post securely to the prepared ground masonry using the provided mounting hardware. Ensure the post is level and stable.
- Connect the electrical wiring from your power source to the lamp post's internal wiring. Follow all local electrical codes. This product is suitable for wet locations.
- Attach the three light fixtures to the top of the post.
- Install three E26 base bulbs (max 100W each, not included) into the sockets.
- Restore power at the circuit breaker and test the light functionality.
Figure 2: Installation Features
Navodila za uporabo
Funkcionalnost od mraka do zore
The VIANIS V82013 lamp post features a built-in high-sensitivity photocell sensor for automatic operation:
- Luč se bo samodejno vklopila IZKLOP during the daytime when the ambient brightness exceeds 100 lux.
- Luč se bo samodejno vklopila ON at night when the ambient brightness falls below 20 lux.
This automatic feature provides convenience and energy efficiency, eliminating the need for manual operation.
Figure 3: Dusk to Dawn Sensor Operation
Zamenjava žarnice
Lamp post is designed for easy bulb replacement:
- The light fixtures have a bottom opening design.
- To replace a bulb, simply unscrew the old bulb and screw in a new E26 base bulb (max 100W). No tools are required for this process, which typically takes less than one minute per bulb.
Figure 4: Easy Bulb Replacement
Figure 5: Compatible E26 Bulb Types (Max 100W)
Vzdrževanje
Čiščenje
- Za čiščenje lamp post and glass, ensure power is disconnected at the circuit breaker.
- Površine obrišite z mehko, damp krpo. Izogibajte se abrazivnim čistilom ali topilom, ki bi lahko poškodovala površino ali steklo.
- The tempered ripple glass is durable, but care should still be taken during cleaning.
Odpornost na vremenske vplive
The VIANIS V82013 is constructed from aluminum with a black finish, designed to be waterproof, anti-rust, and weather-resistant. It can withstand various outdoor conditions including rain, sun, snow, and wind.
Slika 6: Značilnosti odpornosti na vremenske vplive
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Luč se ponoči ne prižge. | 1. Težava z napajanjem. 2. Okvarjena žarnica. 3. Photocell sensor obstructed or malfunctioning. | 1. Check circuit breaker and wiring connections. 2. Zamenjajte žarnico. 3. Ensure photocell is clear of debris and not exposed to other light sources at night. |
| Svetloba se čez dan ne ugasne. | 1. Photocell sensor not receiving enough light. 2. Photocell sensor malfunctioning. | 1. Ensure photocell is not obstructed or in a shaded area during the day. 2. Če težave ne odpravite, se obrnite na podporo strankam. |
| Svetloba utripa. | 1. Ohlapna povezava ožičenja. 2. Okvarjena žarnica. 3. Incompatible bulb type. | 1. Check all wiring connections (ensure power is off). 2. Zamenjajte žarnico. 3. Ensure E26 bulbs are rated for 120V and compatible with outdoor use. |
Specifikacije izdelka
| Znamka | VIANIS |
| Številka modela | V82013 |
| Dimenzije (D x Š x V) | 22" x 22" x 78.7" (6.5 ft height) |
| Material | Aluminum, Tempered Ripple Glass |
| barva | Črna |
| Vir napajanja | Električni na kabel |
| voltage | 120 voltov (AC) |
| Podnožje žarnice | E26 |
| Max Wattage na žarnico | 100 vatov |
| Število svetlobnih virov | 3 |
| Posebne lastnosti | Dusk to Dawn Sensor, Anti-Rust, Water Resistant, Energy Efficient |
| Notranja/zunanja uporaba | Zunanji (za uporabo v mokrih prostorih) |
| Vrsta namestitve | Talni nosilec |
| Zahtevana montaža | ja |
Informacije o garanciji
This VIANIS product is covered by a 1-letna omejena garancija from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by improper installation, accident, misuse, abuse, or acts of nature.
Za uveljavljanje garancije ali servisa shranite dokazilo o nakupu.
Figure 7: Warranty and Certification
Podpora uporabnikom
If you have any questions, require assistance with installation, or need to report a problem with your VIANIS Triple Head Dusk to Dawn Outdoor Post Light, please contact our customer support team.
Please refer to the contact information provided with your purchase or visit the official VIANIS webstran za podrobnosti o podpori.
