Pomembne varnostne informacije
Please read this instruction manual carefully before installing or operating your Brilliant Dody Outdoor Wall Light. Keep this manual for future reference. Improper installation or use can lead to electric shock, fire, or other hazards.
- Pred namestitvijo, vzdrževanjem ali zamenjavo žarnice se prepričajte, da je napajanje izklopljeno.
- Če niste prepričani glede električne napeljave, naj namestitev opravi usposobljen električar.
- This product is designed for outdoor use with an IP44 rating, providing protection against splashing water.
- Ne prekoračite največje wattage, določeno za žarnico.
Vsebina paketa
Pred začetkom namestitve preverite, ali so prisotne vse komponente:
- 1 x Brilliant Dody Outdoor Wall Light fixture
- Pritrdilni material (vijaki, stenski vložki)
- Navodila za uporabo
Opomba: Žarnica E27 ni priložena in jo je treba kupiti posebej.
Nastavitev in namestitev
- Pripravite območje namestitve: Choose a suitable wall location for mounting. The recommended mounting height for optimal motion detection is 1.8 meters. Ensure the power supply to the installation area is switched off at the main circuit breaker.
- Označite vrtalne točke: Hold the light fixture against the wall at the desired mounting height. Mark the positions for the drilling holes using a pencil.
- Vrtanje lukenj: Drill holes at the marked positions. Insert the provided wall plugs into the drilled holes.
- Povežite ožičenje: Carefully connect the electrical wires from your mains supply to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral, Earth). If you are unsure, consult a qualified electrician.
- Namestite napeljavo: Secure the light fixture to the wall using the provided screws. Ensure it is firmly attached.
- Namestite žarnico: Insert an E27 bulb (max 20W, LED compatible) into the lamp holder. Ensure the bulb is securely screwed in.
Slika: spredaj view of the Brilliant Dody Outdoor Wall Light, showing its sleek black and white design. This image illustrates the overall appearance of the fixture before installation.
Image: Close-up of the top section of the Brilliant Dody Outdoor Wall Light, highlighting the white diffuser and black trim. This view helps in understanding the bulb housing area.
Navodila za uporabo
The Brilliant Dody Outdoor Wall Light features an integrated motion detector for automatic operation. After installation, restore power to the fixture.
Motion Detector Settings:
The motion sensor has adjustable settings for 'TIME' and 'LUX'. These controls are typically located on the sensor unit itself.
Slika: Podrobna view of the motion sensor and its adjustment dials (TIME and LUX) on the Brilliant Dody Outdoor Wall Light. This image shows where to find and adjust the sensor settings.
- ČAS: This dial controls how long the light remains on after motion is detected and no further motion is sensed. Rotate the dial to increase or decrease the duration.
- LUX: This dial determines the ambient light level at which the sensor becomes active. Rotate towards the sun icon for the sensor to activate in brighter conditions (daytime), or towards the moon icon for it to activate only in darker conditions (nighttime).
Območje zaznavanja:
- Kot zaznavanja: 120°
- Obseg zaznavanja: Up to 8 meters on both sides, with a maximum detection range of 10 meters.
- Optimalna montažna višina: 1.8 meters for best performance.
Vzdrževanje
- Čiščenje: Za čiščenje naprave se prepričajte, da je napajanje izklopljeno. Obrišite z mehko,amp krpo. Ne uporabljajte abrazivnih čistil ali topil, saj lahko poškodujejo površino iz nerjavečega jekla ali plastični difuzor.
- Zamenjava žarnice: Before replacing the bulb, ensure the power supply is disconnected. Allow the old bulb to cool down completely. Unscrew the old E27 bulb and replace it with a new E27 bulb (max 20W, LED compatible).
- Pregled: Občasno preverite pritrditev glede morebitnih znakov poškodb, ohlapnih priključkov ali obrabe.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Luč se ne vklopi. | Brez napajanja. Okvarjena žarnica. Incorrect LUX setting. | Preverite odklopnik. Zamenjajte žarnico. Adjust LUX dial towards the moon icon for darker conditions. |
| Svetloba neprekinjeno sveti. | Zaznano stalno gibanje. Napačna nastavitev ČASA. | Ensure no objects are constantly moving in the detection zone. Nastavite gumb TIME na krajši čas. |
| Senzor gibanja ne zaznava. | Ovira na poti zaznavanja. Incorrect LUX setting. Senzor umazan. | Odstranite morebitne ovire. Adjust LUX dial towards the sun icon for brighter conditions, or ensure it's not set too low for current ambient light. Clean the sensor lens gently. |
Specifikacije izdelka
- Znamka: Briljantno
- Številka modela: 1000134854
- ASIN: B0B11KYHSW
- Dimenzije (D x Š x V): 17 x 7.6 x 40 cm
- Teža: 490 gramov
- Material: Nerjaveče jeklo
- Material senčila: Plastika
- barva: Črna
- Vrsta žarnice: E27 (žarnica ni vključena)
- Max Wattage: 20W (LED compatible)
- Število žarnic: 1
- vir energije: Električni kabel
- Vrsta namestitve: Stenski nosilec
- Posebna lastnost: Detektor gibanja
- Ocena IP: IP44 (Protection against splashing water)
- Motion Detector Angle: 120°
- Doseg detektorja gibanja: Up to 8m (both sides), max 10m
- Optimalna montažna višina: 1.8m
Garancija in podpora
Information regarding specific warranty terms and customer support for Brilliant products may vary by region and retailer. Please refer to the documentation provided at the time of purchase or visit the official Brilliant website for detailed warranty information and support contacts.
For technical assistance or inquiries, please contact Brilliant customer service through their official channels.