WFLNHB 48/72V 2000W DC Brushless Electric Motor Speed Control Box User Manual

1. Uvod in konecview

This manual provides detailed instructions for the installation, operation, and maintenance of the WFLNHB 48/72V 2000W DC Brushless Electric Motor Speed Control Box. This controller is designed for use with electric bicycles and scooters, offering efficient and sensitive speed control for brushless DC motors.

Image 1.1: The WFLNHB 48/72V 2000W DC Brushless Electric Motor Speed Control Box, showing its aluminum casing and multiple wire connections.

Ključne značilnosti:

• voltage Združljivost: Supports 48V and 72V battery systems.
• Izhodna moč: Namenjeno za motorje z močjo 2000 W.
• Gladko delovanje: Designed to reduce friction and noise for a smoother ride.
• Natančen nadzor: Offers sensitive and accurate speed control, including low-speed torque.
• Vzdržljiva konstrukcija: Features a high-performance aluminum alloy shell for effective heat dissipation and internal circuit protection.
• Varnostne funkcije: Includes sensitive control for braking and direction changes, enhancing driving security.

2. Specifikacije

3. Nastavitev in namestitev

Proper installation is crucial for the safe and effective operation of your motor controller. Please follow these instructions carefully. It is recommended that installation be performed by an individual with experience in electrical systems for electric vehicles.

3.1 Component Identification and Wiring Diagram

Image 3.1: Detailed wiring diagram showing all connection points on the WFLNHB motor controller. Each wire bundle is labeled with its function.

Refer to Image 3.1 for visual identification of the various wire connections. Each connection serves a specific function within your electric bicycle or scooter system.

3.2 Navodila za ožičenje

Before beginning, ensure the battery is disconnected to prevent electrical shock or damage to components. Connect the wires according to the following guide:

1. Motor Line: Connect the three thick wires (typically green, yellow, blue) from the controller to the corresponding phase wires of your brushless motor. Ensure colors match.
2. Positive Electrode (Battery +): Connect the thick red wire from the controller to the positive terminal of your battery.
3. Negative Electrode (Battery -): Connect the thick black wire from the controller to the negative terminal of your battery.
4. Lock (Ignition): Connect the ignition wire from your vehicle's key switch or power lock to this wire on the controller. This typically enables or disables power to the controller.
5. Alarm Power Supply: Connect to your alarm system's power input, if applicable.
6. High Brake: Connect to the high-level brake signal wire from your brake levers. This signal typically cuts motor power when brakes are applied.
7. Study Wire (Self-Learning): These two wires (often white or blue) are used for initial motor phase learning. Connect them together briefly, turn on the power, and the motor should spin. If it spins in the wrong direction, disconnect, reconnect, and try again. Once the motor spins correctly, disconnect these wires.
8. Žice Hallovega senzorja: Connect the thin wires (typically red, black, blue, green, yellow) from the controller to the corresponding Hall sensor wires of your brushless motor. These provide feedback on motor position.
9. Križarjenje: Connect to the cruise control switch, if your system supports this feature.
10. Low Brake: Connect to the low-level brake signal wire from your brake levers. This signal typically cuts motor power when brakes are applied.
11. Zadaj: Connect to a reverse switch, if your vehicle requires a reverse function.
12. Alarm Wire: Connect to the signal wire from your alarm system.
13. LCD Display / Instruments: Connect to your vehicle's LCD display or instrument panel for speed, battery level, and other data.
14. Nastavek: Connect the throttle input wires (typically red, black, green) to your throttle assembly. Red is usually positive, black is negative, and green is the signal wire.
15. Three Speed: Connect to a three-speed switch, if your system allows for different speed modes.

After all connections are made, double-check each connection for security and correct polarity before reconnecting the battery.

4. Navodila za uporabo

Once the controller is correctly installed and the battery is connected, the system is ready for operation.

• Vklop: Turn the ignition key or power switch to the "ON" position. The display (if connected) should illuminate.
• Nadzor plina: Gently twist the throttle to engage the motor. The motor speed will increase proportionally with the throttle input.
• Zaviranje: Applying the brake levers will cut power to the motor, ensuring safe deceleration.
• Speed Modes (if applicable): Use the three-speed switch to select desired speed modes (e.g., low, medium, high).
• Cruise Control (if applicable): Activate the cruise control switch to maintain a constant speed.
• Ugasniti: Turn the ignition key or power switch to the "OFF" position when finished operating the vehicle.

5. Vzdrževanje

The WFLNHB motor controller is designed for durability and requires minimal maintenance. However, regular checks can extend its lifespan and ensure optimal performance.

• Vzdržujte čisto: Periodically clean the exterior of the controller to prevent dust and debris buildup, which can hinder heat dissipation. Use a dry, soft cloth.
• Preverite povezave: Regularly inspect all wire connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent operation or damage.
• Izogibajte se izpostavljenosti vodi: Medtem ko aluminij casing offers some protection, avoid direct exposure to heavy rain or submersion in water to prevent internal damage.
• Upravljanje temperature: Ensure the controller is mounted in a location with adequate airflow to prevent overheating, especially during prolonged high-power operation.
• Fizična poškodba: Preverite casing for any signs of physical damage. A damaged casing may compromise the internal components.

6. Odpravljanje težav

If you encounter issues with your motor controller, refer to the following common problems and solutions:

7. Garancija in podpora

This product is manufactured by WFLNHB. For specific warranty information or technical support, please refer to the documentation provided at the time of purchase or contact WFLNHB directly through their official channels. Ensure you have your purchase details and product model information available when seeking support.

For general inquiries or to find contact information, you may visit the WFLNHB Store on Amazon.