DIGITUS DS-55318 Komplet brezžičnih HDMI podaljševalnikov Uporabniški priročnik

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the DIGITUS DS-55318 Wireless HDMI Extender Set. This device allows for wireless transmission of HDMI video and audio signals up to 50 meters with an unobstructed view, supporting Full HD (1080p / 60 Hz) resolution.

Image 1.1: The DIGITUS DS-55318 Wireless HDMI Extender Set, showing both the transmitter and receiver units.

2. Varnostne informacije

Please read and follow these safety instructions carefully before using the device:

• Naprave ne izpostavljajte vlagi, ekstremnim temperaturam ali neposredni sončni svetlobi.
• Naprave ne razstavljajte ali poskušajte popraviti. Vsa servisna dela prepustite usposobljenemu osebju.
• Med delovanjem zagotovite ustrezno prezračevanje okoli enot.
• Use only the provided power cables or compatible Micro-USB power sources (5V/0.5A).

3. Vsebina paketa

Preverite, ali so v paketu vsi elementi:

• 1x Wireless HDMI Extender Transmitter (TX)
• 1x Wireless HDMI Extender Receiver (RX)
• 2x Micro USB power cables (approx. 80 cm each)
• 2x HDMI extension cables (approx. 15 cm each)
• 1x Vodnik za hitro namestitev (QIG)

Image 3.1: All components included in the DIGITUS DS-55318 Wireless HDMI Extender Set package.

4. Izdelek je končanview

The DIGITUS DS-55318 set consists of two main units: a Transmitter (TX) and a Receiver (RX). Both units feature an integrated HDMI plug for direct connection and a Micro-USB port for power.

4.1. Sestavni deli enote

Slika 4.1: Konecview of the Transmitter and Receiver units, highlighting the HDMI connection and connection button.

• HDMI vtič: Connects directly to the source (TX) or display (RX) device.
• Gumb za povezavo: Used for pairing the transmitter and receiver.
• Vrata mikro-USB: Za napajanje (DC 5V/0.5A).

Slika 4.2: Podrobno view of the HDMI plugs on both units.

Slika 4.3: Stran view of the units, showing the Micro-USB power input.

5. Navodila za nastavitev

The DIGITUS DS-55318 is designed for simple plug-and-play operation. Follow these steps for a point-to-point connection:

5.1. Priključitev oddajnika (TX)

1. Connect the HDMI plug of the Transmitter (TX) unit to the HDMI output port of your source device (e.g., laptop, PC, media player). If space is limited, use the provided HDMI extension cable.
2. Connect one of the Micro-USB power cables to the Micro-USB port on the Transmitter. Connect the other end of the USB cable to a USB port on your source device or a USB power adapter (5V/0.5A, not included). The source device's HDMI connection must provide at least 500 mA for power.

Image 5.1: The Transmitter (TX) unit connected to a laptop.

5.2. Priključitev sprejemnika (RX)

1. Connect the HDMI plug of the Receiver (RX) unit to an available HDMI input port on your display device (e.g., TV, monitor, projector). If needed, use the provided HDMI extension cable.
2. Connect the second Micro-USB power cable to the Micro-USB port on the Receiver. Connect the other end of the USB cable to a USB port on your display device or a USB power adapter (5V/0.5A, not included). The display device's HDMI connection must provide at least 500 mA for power.

Image 5.2: The Receiver (RX) unit connected to a television.

5.3. Establishing Connection (Pairing)

The transmitter and receiver units are typically pre-paired from the factory. If they do not connect automatically, follow these steps:

1. Ensure both the Transmitter and Receiver units are powered on and connected to their respective devices.
2. Press the "Connection button" on the Transmitter unit.
3. Within a few seconds, press the "Connection button" on the Receiver unit.
4. The units should establish a connection, and the video signal from the source device will appear on the display.

Image 5.3: Point-to-point connection diagram for the Wireless HDMI Extender.

Slika 5.4: Primerample of the extender set in use within a meeting room environment.

6. Navodila za uporabo

Once the connection is established, the DIGITUS DS-55318 operates automatically.

• Prenos signala: The device wirelessly transmits HDMI video and audio signals from the source to the display.
• Podpora za ločljivost: Supports resolutions up to Full HD (1080p / 60 Hz).
• Razdalja prenosa: Effective transmission distance is up to 50 meters with an unobstructed line of sight. Obstacles such as walls or furniture may reduce the effective range.
• Varnost: Features AES 128-bit encryption and WPA2 protocol for secure transmission.

7. Vzdrževanje

To ensure the longevity and optimal performance of your DIGITUS DS-55318:

• Keep the units clean by wiping them with a soft, dry cloth. Do not use liquid cleaners.
• Naprave shranjujte na hladnem in suhem mestu, ko jih ne uporabljate.
• Avoid placing heavy objects on the units.

8. Odpravljanje težav

Če naletite na težave, si oglejte naslednje pogoste težave in rešitve:

9. Specifikacije

Technical specifications for the DIGITUS DS-55318 Wireless HDMI Extender Set:

Image 9.1: Technical features as listed on the product packaging.

10. Informacije o garanciji

DIGITUS products are covered by a manufacturer's warranty. Please refer to the official DIGITUS website or your purchase documentation for specific warranty terms and conditions applicable to your region. Keep your proof of purchase for warranty claims.

11. Podpora

For technical support, product information, or service inquiries, please visit the official DIGITUS webspletno mesto:

www.digitus.info

Manufacturer: ASSMANN Electronic GmbH, Auf dem Schüffel 3, 58513 Lüdenscheid, Germany.

UPC: 4016032478744