FLEXISPOT Gas Spring Monitor Arm F8L User Manual

1. Uvod

Thank you for choosing the FLEXISPOT F8L Gas Spring Monitor Arm. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor arm. Please read this manual thoroughly before use and keep it for future reference.

Ključne značilnosti:

• Detachable VESA plate for easy monitor attachment.
• Adjustable height for ergonomic viewing, reducing neck, eye, and back strain.
• Wide range of motion for tilt, swivel, and rotation, allowing optimal viewing kotov.
• Compact design suitable for narrow desks, enabling side-by-side monitor placement at a distance.
• Supports VESA standards: 75x75mm and 100x100mm.
• Compatible with monitors from 17" to 36" and weighing between 2-9kg.

This image shows the FLEXISPOT F8L Gas Spring Monitor Arm in white, supporting a monitor. The arm is extended, demonstrating its adjustable nature and sleek design.

2. Varnostna navodila

• Pred sestavljanjem se prepričajte, da so vsi deli prisotni in nepoškodovani. Ne uporabljajte, če kateri koli del manjka ali je okvarjen.
• Do not exceed the maximum weight capacity of 9kg (19.8 lbs) or the maximum screen size of 36 inches. Overloading can cause instability and potential injury.
• Install the monitor arm on a stable and sturdy desk surface that can support the combined weight of the arm and your monitor.
• Perform all adjustments slowly and carefully. Avoid sudden movements that could cause the monitor to swing or fall.
• Otroke in hišne ljubljenčke držite stran od območja namestitve.
• If you encounter any difficulties during installation or operation, refer to the troubleshooting section or contact customer support.

3. Vsebina paketa

Prosimo, preverite, ali so v paketu priložene vse komponente:

• Sklop ročice monitorja
• Pisalna miza Clamp Osnova
• Podstavek za pritrditev Grommet
• VESA plošča
• Komplet strojne opreme (vijaki, podložke, imbus ključi)
• Posnetki za upravljanje kablov
• Navodila za uporabo

4. Nastavitev in namestitev

The FLEXISPOT F8L monitor arm supports two installation methods: C-clamp in pritrditev z obročki. Izberite način, ki je primeren za vašo mizo.

4.1 Choosing Your Mounting Method

This diagram illustrates the two primary ways to attach the monitor arm to your desk: the C-clamp method (bottom right) for desk edges and the grommet mount method (top right) for desks with existing cable holes. The grommet mount requires a hole size of 8.5-70mm, and both methods support a desk thickness of 20-100mm.

• C-Clamp Montaža: Ideal for desks with edges. Supports desk thickness from 20mm to 100mm.
• Nosilec za ušesa: Requires an existing hole in your desk (diameter 8.5mm to 70mm). Supports desk thickness from 20mm to 100mm.

4.2 Attaching the Monitor Arm to Your Desk

1. Za C-Clamp Montaža:
   • Pritrdite C-clamp base to the main pole of the monitor arm.
   • Postavite clamp on the edge of your desk and tighten the knob until it is securely fastened.
2. For Grommet Mount:
   • Assemble the grommet mount base and insert it through the hole in your desk.
   • Secure it from underneath the desk using the provided plate and nut.

4.3 Attaching the Monitor to the Arm

This image demonstrates the detachable VESA plate feature. The VESA plate can be easily removed from the monitor arm, allowing you to attach it to the back of your monitor first, and then slide the monitor with the plate onto the arm for a simpler installation process.

1. Pritrdite ploščo VESA na monitor:
   • Remove the VESA plate from the monitor arm by lifting it upwards.
   • Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm).
   • Secure the plate to the monitor using the appropriate screws from the hardware kit. Do not overtighten.
2. Namestitev monitorja na roko:
   • Carefully slide the monitor (with the attached VESA plate) onto the arm's mounting head until it clicks into place.
   • Ensure the monitor is securely seated before releasing.

5. Upravljanje in nastavitve

The FLEXISPOT F8L monitor arm offers a wide range of adjustments to achieve your optimal viewizkušnje.

5.1 Nastavitev napetosti plinske vzmeti

The gas spring tension needs to be adjusted according to your monitor's weight to ensure smooth and stable movement. If the monitor sags or springs up too easily, adjust the tension screw located on the arm joint (often covered by a plastic cap).

• Use the provided Allen wrench to turn the screw.
• Obrni se v smeri urinega kazalca to increase tension (for heavier monitors).
• Obrni se v nasprotni smeri urnega kazalca to decrease tension (for lighter monitors).
• Adjust gradually until the monitor stays in position when released.

5.2 Prilagoditve položaja monitorja

This diagram illustrates the extensive range of motion for the monitor arm, including 360° rotation, 180° horizontal swivel, and tilt adjustment from -90° to 15°. These features allow for precise positioning of your monitor.

• Nastavitev višine: Gently push or pull the monitor up or down to adjust its vertical position. The gas spring will hold it in place.
• Nastavitev nagiba: Tilt the monitor screen up or down from -90° to 15° to reduce glare and optimize viewvhodni kot.
• Nastavitev vrtenja: Swivel the monitor arm horizontally up to 180° to share your screen or change viewsmer.
• Nastavitev vrtenja: Rotate the monitor 360° between landscape and portrait orientations.

This illustration compares typical poor posture when using a fixed monitor stand (left) versus the improved ergonomic posture achievable with a monitor arm (right). By allowing flexible height and angle adjustments, the monitor arm helps reduce strain on the neck, eyes, and back.

6. Vzdrževanje

• Regularly check all screws and connections to ensure they are tight and secure. Retighten if necessary.
• Držalo monitorja očistite z mehko krpoamp krpo. Izogibajte se abrazivnim čistilom ali topilom, ki bi lahko poškodovala površino.
• Ne mažite plinskega vzmetnega mehanizma. Zasnovan je tako, da ne potrebuje vzdrževanja.

7. Odpravljanje težav

8. Specifikacije

This diagram provides key dimensions of the monitor arm, including a maximum height of approximately 51cm and a maximum horizontal extension of approximately 62cm, illustrating its reach and adjustability.

9. Garancija in podpora strankam

FLEXISPOT provides a 1-letna garancija from the date of purchase for this product. This warranty covers manufacturing defects and material flaws under normal use.

For any questions, concerns, or issues regarding your FLEXISPOT F8L Gas Spring Monitor Arm, please contact our customer support team:

• E-pošta: contact@flexispot.jp
• Please provide your purchase details and a description of the issue for faster assistance.