1. Uvod
Thank you for choosing the MOUNTUP Ultrawide Single Monitor Arm, Model MU7007. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor arm. Please read this manual thoroughly before installation and keep it for future reference.
2. Varnostne informacije
Med namestitvijo in uporabo upoštevajte naslednje varnostne ukrepe:
- Ne prekoračite največje dovoljene nosilnosti 33 kg (15 lbs).
- Prepričajte se, da je vzorec VESA vašega monitorja združljiv (75 x 75 mm ali 100 x 100 mm).
- Preverite, ali je površina vaše mize dovolj močna, da prenese skupno težo ročaja za monitor in vašega monitorja.
- Always use the provided hardware and follow installation steps carefully.
- Med namestitvijo hranite otroke in hišne ljubljenčke proč.
- Adjust the gas spring tension only when the arm is in a horizontal position to prevent sudden movement.
3. Vsebina paketa
Preverite, ali so vse komponente prisotne in nepoškodovane:
- Sklop ročice monitorja
- Snemljiva plošča VESA
- C-Clamp Osnova
- Grommet Base (Optional)
- Mounting Hardware Kit (screws, washers, spacers)
- Ključi Allen
- Navodila za uporabo
Image: All components of the MOUNTUP Ultrawide Single Monitor Arm, showing the main arm, the C-clamp mounting option, and the grommet mounting option.
4. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Številka modela | MU7007 |
| Združljivost velikosti zaslona | 22 - 40 palcev |
| Zmogljivost teže | 6.6 - 33 lbs (3 - 15 kg) |
| Združljivost VESA | 75x75 mm, 100x100 mm |
| Možnosti namestitve | C-Clamp, Grommet |
| Razpon nagiba | +90° / -45° |
| Vrtljiv domet | 180° (at arm joints), 360° (at VESA plate) |
| Vrtenje | 360° (od pokončnega do ležečega) |
| Največja razširitev | 22.5 palcev (57.15 cm) |
| Max Height Adjustment | 19.75 palcev (50.16 cm) |
| Material | Legirano jeklo |
| barva | Črna |
| Vrata USB | 2 (integrated into base, USB cable not included) |
Image: The monitor arm supporting an ultrawide screen, highlighting its compatibility with screens up to 40 inches and a weight capacity of 30.9 lbs.
5. Nastavitev in namestitev
The MOUNTUP monitor arm offers two installation methods: C-Clamp and Grommet Mount.
5.1. Izberite način montaže
Determine which mounting method is suitable for your desk. The C-clamp is drill-free, while the grommet mount requires a hole in your desk.
5.2. C-Clamp Namestitev
- Pritrdite C-clamp do dna glavnega droga.
- Place the monitor arm assembly onto your desk edge.
- Zategnite C-clamp screw until the arm is securely fastened to the desk.
5.3. Grommet Mount Installation (Optional)
- If your desk has a grommet hole, or you plan to drill one, attach the grommet base plate to the bottom of the main pole.
- Insert the pole through the grommet hole.
- Secure the base from underneath the desk using the provided hardware.
5.4. Pritrditev monitorja
- Attach the detachable VESA plate to the back of your monitor using the appropriate VESA screws and spacers from the hardware kit. Ensure the screws are tightened securely.
- Slide the monitor (with the attached VESA plate) onto the arm's VESA head until it clicks into place.
- Tighten the security screw on the VESA head to prevent accidental detachment.
Image: A woman demonstrating the easy installation process, attaching a monitor to the arm using the detachable VESA plate, indicating setup can be completed within 15 minutes.
6. Upravljanje in nastavitve
The MOUNTUP monitor arm offers extensive adjustability for optimal ergonomic positioning.
6.1. Nastavitev napetosti plinske vzmeti
The gas spring tension needs to be adjusted to match your monitor's weight. If the monitor rises too easily or drops, adjust the tension:
- Monitor raises up: Turn the adjustment screw (located on the arm joint) clockwise (towards the "-" direction) to reduce tension for lighter monitors.
- Monitor drops down: Turn the adjustment screw counter-clockwise (towards the "+" direction) to increase tension for heavier monitors.
- Pomembno: Hold the arm in a horizontal position during adjustment to prevent sudden movement.
6.2. Nastavitev višine
Once the gas spring tension is correctly set, you can freely move the monitor up and down to your desired height. The arm allows for a height adjustment range of 13 inches, with a minimum height of 6.7 inches and a maximum height of 19.7 inches from the desk surface.
6.3. Tilt Angle Adjustment
To adjust the monitor's tilt angle:
- Loosen the tilting bolt (turn towards the "-" direction) on the VESA head.
- Adjust the monitor to your desired tilt angle (+90° to -45°).
- Retighten the tilting bolt (turn towards the "+" direction) to secure the angle.
6.4. Vrtenje in rotacija
- Vrtljiva: The arm joints allow for 180° swivel, and the VESA plate can swivel 360°, providing flexibility to share your screen or adjust viewing kotov.
- Vrtenje: The VESA plate supports 360° rotation, allowing you to switch your monitor between landscape and portrait orientations.
Image: Detailed instructions for adjusting the gas spring tension and the monitor's tilt angle using an Allen wrench.
Image: Visual representation of the monitor arm's full range of motion, including tilt (+90°/-45°), 360° swivel at arm joints, and 360° rotation for portrait/landscape viewing.
Image: A diagram illustrating the free height adjustment capabilities, showing minimum height (6.7"), maximum height (19.7"), and maximum extension (22.6").
6.5. Upravljanje kablov
The monitor arm features integrated cable management to keep your workspace tidy. Route your cables through the removable covers on the arm and the base. The base also includes two USB connectors for convenient access (USB cable not included).
Image: A visual guide demonstrating the routing of cables through the detachable USB connector integrated into the monitor arm's base, promoting a clutter-free desk.
7. Vzdrževanje
Regular maintenance ensures the longevity and optimal performance of your monitor arm:
- Čiščenje: Obrišite roko in podstavek z mehko krpoamp krpo. Izogibajte se abrazivnim čistilom.
- Preverite povezave: Občasno preverite vse vijake in matico, da se prepričate, da so trdno priviti. Po potrebi jih ponovno privijte.
- Plinska vzmet: The gas spring is designed for long-term use (over 20,000 cycles) and generally requires no specific maintenance beyond initial tension adjustment.
8. Odpravljanje težav
Če imate težave z roko za monitor MOUNTUP, si oglejte naslednje pogoste težave in rešitve:
8.1. Monitor Sags or Does Not Hold Position
- vzrok: Napetost plinske vzmeti je prenizka glede na težo monitorja.
- rešitev: Increase the gas spring tension by turning the adjustment screw counter-clockwise (towards the "+" direction) as described in Section 6.1.
8.2. Monitor Floats Up or is Difficult to Push Down
- vzrok: Napetost plinske vzmeti je previsoka glede na težo monitorja.
- rešitev: Decrease the gas spring tension by turning the adjustment screw clockwise (towards the "-" direction) as described in Section 6.1.
8.3. Monitor Tilts Forward or Backward Unexpectedly
- vzrok: The tilt angle bolt on the VESA head is loose.
- rešitev: Retighten the tilt angle bolt as described in Section 6.3.
8.4. Arm Feels Loose or Unstable
- vzrok: Pisalna miza clamp or grommet mount is not sufficiently tightened.
- rešitev: Recheck and tighten the C-clamp or grommet mounting hardware securely.
9. Garancija in podpora
MOUNTUP stands behind the quality and durability of its products. This monitor arm comes with a 3-year support period, ensuring its strength and reliability.
For further assistance, technical support, or warranty claims, please contact MOUNTUP customer service through the retailer where you purchased the product or visit the official MOUNTUP webspletno mesto za kontaktne podatke.