AsperX AX2500 Car Jump Starter User Manual

Uvod

Thank you for choosing the AsperX AX2500 Car Jump Starter. This device is designed to provide a reliable and safe solution for starting 12V vehicles with dead batteries, and also serves as a portable power bank and LED flashlight. Please read this manual thoroughly before use to ensure proper operation and safety.

Pomembne varnostne informacije

Vedno upoštevajte naslednje varnostne ukrepe, da preprečite poškodbe ali škodo na napravi ali vozilu:

• Do not attempt to jump start a vehicle if the jump starter or cables are damaged.
• Ensure proper polarity when connecting the jumper cables to the vehicle battery. Incorrect connection can cause sparks and damage.
• Ne dovolite rdečega in črnega clampda se po priklopu na zagonski kabel dotikajo drug drugega.
• Keep the jump starter away from children.
• Do not expose the jump starter to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F) or direct sunlight for extended periods.
• Do not disassemble, modify, or attempt to repair the jump starter.
• Use only the provided smart jumper cables and charging accessories.
• Remove the jump starter from the vehicle battery within 30 seconds after the vehicle starts.

Slika: Notranja view of the AsperX AX2500 jump starter highlighting its intelligent protection features, including zero spark and zero damage design, and operating temperature range of -4°F to 140°F.

Vsebina paketa

Preverite, ali so v paketu vsi elementi:

• AsperX AX2500 Portable Car Jump Starter
• Smart Jumper Cable with Clamps
• USB polnilni kabel tipa C
• Torbica za shranjevanje
• Adapter za cigaretni vžigalnik
• Uporabniški priročnik

Image: All items included in the AsperX AX2500 jump starter package.

Konec izdelkaview

Familiarize yourself with the components of your AsperX AX2500 jump starter:

Image: Detailed diagram of the AsperX AX2500 jump starter with numbered labels for each component.

1. 12V Jumper Cable Port
2. USB-C Quick Charge Input/Output (PD 18W)
3. USB Quick Charge Output (USB-A)
4. LED svetilka
5. 12V 10A DC Output
6. Gumb za vklop
7. Lučke indikatorja moči
8. Warning Light Switch
9. Opozorilna lučka

Nastavitev in polnjenje

Polnjenje zaganjalnika

Before first use, fully charge the AsperX AX2500. It is recommended to recharge the unit every 3-6 months to maintain battery health, even if not used.

1. Connect the provided USB Type-C charging cable to the USB-C Quick Charge Input/Output port (2) on the jump starter.
2. Connect the other end of the USB Type-C cable to a compatible USB wall adapter (not included) or car charger.
3. The Power Indicator Lights (7) will illuminate and flash during charging. All four lights will be solid when fully charged.

The 21000mAh capacity ensures multiple uses and can charge other devices quickly.

Image: The AsperX AX2500 jump starter displaying its various output ports and highlighting its 21000mAh capacity.

Navodila za uporabo

Skočni zagon vozila

The AsperX AX2500 is designed to jump start 12V vehicles with up to 10L gas or 7.3L diesel engines. Ensure the jump starter is at least 75% charged (3 indicator lights) before attempting a jump start.

1. Pripravite vozilo: Turn off the vehicle's ignition and all accessories (headlights, radio, air conditioning). Engage the parking brake.
2. Priključite kable za zagon na zagonski kabel: Insert the blue plug of the smart jumper cable into the 12V Jumper Cable Port (1) on the jump starter. Ensure a firm connection. The indicator light on the smart cable should flash.
3. Poveži Clamps do akumulatorja vozila:
   • Priložite rdeča (+) clamp na pozitivni (+) pol akumulatorja vozila.
   • Priložite črna (-) clamp to the vehicle's negative (-) battery terminal or a solid, unpainted metal part of the vehicle's chassis away from the battery.

   The smart cable will perform a self-check. If the indicator light on the smart cable turns solid green, it's safe to proceed. If it shows a red light or beeps, check connections for correct polarity or if the battery is too low/damaged.

4. Zagon vozila: Once the smart cable indicator is solid green, start your vehicle's engine.
5. Remove Jumper Cables: As soon as the vehicle starts, immediately remove the black (-) clamp from the vehicle, then the red (+) clamp. Disconnect the smart cable from the jump starter.

Image: The AsperX AX2500 jump starter connected to a vehicle battery using the smart jumper cables, ready for operation. This image also illustrates the wide range of vehicles it can start, including trucks, SUVs, motorcycles, and lawnmowers.

Uporaba kot Power Bank

The AsperX AX2500 can charge various electronic devices via its USB-C PD 18W port (2) and USB Quick Charge Output (3).

1. Priključite polnilni kabel naprave v ustrezen USB vhod na zaganjalniku.
2. Press the Power Button (6) to begin charging. The power indicator lights will show the remaining battery level.

Image: The AsperX AX2500 jump starter being used to charge a smartphone and a tablet simultaneously, demonstrating its power bank functionality.

Using the 12V DC Output

The 12V 10A DC Output (5) can power 12V accessories like car air pumps or vacuum cleaners using the included cigarette lighter adapter.

1. Connect the cigarette lighter adapter to the 12V 10A DC Output port (5).
2. Plug your 12V accessory into the cigarette lighter adapter.
3. Press the Power Button (6) to activate the output.

Image: The AsperX AX2500 jump starter connected to and powering a tire inflator through its 12V 10A DC output port.

Uporaba LED svetilke

The integrated LED Flashlight (4) has four modes: Normal, Strobe, SOS, and Red Warning Light.

1. Press and hold the Power Button (6) for 3 seconds to turn on the flashlight in Normal mode.
2. Press the Power Button (6) briefly to cycle through Strobe, SOS, and Red Warning Light modes.
3. Press and hold the Power Button (6) again for 3 seconds to turn off the flashlight.

Image: The AsperX AX2500 jump starter's LED flashlight in operation, illustrating its various lighting modes for different emergency and utility scenarios.

Vzdrževanje

• Shranjevanje: Zaganjalnik shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in vlage.
• Polnjenje: Recharge the unit every 3-6 months to maintain optimal battery performance, even if it has not been used.
• Čiščenje: Napravo obrišite z mehko, suho krpo. Ne uporabljajte agresivnih kemikalij ali abrazivnih čistil.
• Vzdrževanje baterije: Baterije ne prepolnite ali popolnoma izpraznite.

Odpravljanje težav

Specifikacije

Garancija in podpora

The AsperX AX2500 Car Jump Starter comes with a 2-year technical support warranty.

If you encounter any issues or have questions regarding your product, please contact AsperX customer support. Refer to the contact information provided in your original purchase documentation or on the official AsperX webmesto.