CLABEL 220B

Uporabniški priročnik za termični tiskalnik etiket CLABEL 220B z Bluetoothom

Model: 220B

1. Uvod

This manual provides comprehensive instructions for the safe and efficient operation of your CLABEL 220B Thermal Bluetooth Label Printer. This portable, inkless label maker is designed for various applications in small businesses, offices, and homes, supporting label widths from 20mm to 50mm.

2. Vsebina paketa

Prosimo, preverite, ali so v vašem paketu priloženi vsi spodaj navedeni artikli:

  • CLABEL 220B Thermal Bluetooth Label Printer
  • 1 Roll of Thermal Labels
  • USB polnilni kabel
  • Uporabniški priročnik (ta dokument)

3. Izdelek je končanview

Familiarize yourself with the components of your CLABEL 220B printer.

CLABEL 220B Label Printer with a printed label and a roll of blank labels

Image: The CLABEL 220B printer, showcasing its compact design, a printed label emerging from the output slot, and a roll of blank labels.

The printer features a power button, a feed button, and a label compartment. The charging port is typically located on the side or back.

4. Nastavitev

4.1. Polnjenje tiskalnika

Before initial use, fully charge the printer. Connect the provided USB cable to the printer's charging port and to a 5V-2A power adapter (not included) or a computer's USB port. The charging indicator light will show the charging status.

4.2. Nalaganje oznak

Follow these steps to correctly load the thermal labels:

Four steps demonstrating how to install labels into the CLABEL 220B printer

Image: Step-by-step guide for label installation, showing opening the cover, setting jam protection, inserting labels, and closing the cover.

  1. Odprite pokrov tiskalnika.
  2. Set the jam protection to "OPEN" if applicable.
  3. Insert the label roll into the compartment, ensuring the printable side faces up and the labels are aligned on the left.
  4. Pull out a small length of labels and close the cover securely.

5. Povezava

5.1. Mobile Phone Connection (Bluetooth)

The CLABEL 220B supports connection with iOS and Android devices via Bluetooth.

Three steps for connecting the printer to a mobile phone via Bluetooth using the 'Clabel trade' app

Image: Mobile phone connection steps, illustrating downloading the 'Clabel trade' app, enabling Bluetooth, and connecting to the printer within the app.

  1. Download the "CLABEL trade" app from your device's app store (iOS App Store or Android Google Play Store).
  2. Prepričajte se, da je Bluetooth omogočen na vašem mobilnem telefonu.
  3. Open the "CLABEL trade" app and connect to your printer from the device list.

5.2. Povezava z računalnikom (USB)

For Windows PCs, connect the printer using the provided USB cable.

Four steps for connecting the printer to a computer via USB and printing using the Clabel software

Image: Computer connection steps, detailing turning on the printer, connecting via USB, downloading the driver/app, and printing.

  1. Vklopite tiskalnik.
  2. Tiskalnik priključite na računalnik prek kabla USB.
  3. Download the necessary driver or application from the official CLABEL brand webmesto.
  4. Open the application, create or select a label, and initiate printing.

6. Navodila za uporabo

6.1. Using the CLABEL Trade App

The "CLABEL trade" app offers extensive features for label creation and management:

  • Access over 30 business label templates.
  • Utilize more than 450 common symbols for various applications.
  • Create and customize your own label templates.
  • Edit and typeset labels with text, barcodes, QR codes, images, and more.

6.2. Batch Printing

The printer supports batch printing, allowing you to import data from Excel tables to print multiple labels efficiently. This feature helps improve printing efficiency by setting the printing quantity without repetitive operations.

6.3. Recommended Label Sizes and Uses

The CLABEL 220B printer supports labels with a width of 20-50mm and a length of 15-100mm, accommodating various styles and applications.

Examples of business labels with recommended sizes

Image: Recommended label sizes for business applications, including price tags, barcodes, logos, and product information (e.g., 40x40mm, 50x50mm).

Examples of food labels with recommended sizes

Image: Recommended label sizes for food applications, such as bakery items, ingredient lists, and price & date labels (e.g., 40x30mm, 50x40mm).

Examples of office labels with recommended sizes

Image: Recommended label sizes for office organization, including labels for letters, addresses, folders, and cables (e.g., 25x78mm, 50x30mm).

7. Vzdrževanje

To ensure optimal performance and longevity of your CLABEL 220B printer, follow these maintenance guidelines:

  • Čiščenje tiskalne glave: Regularly clean the thermal print head with an alcohol swab to remove dust or adhesive residue. Ensure the printer is off and cooled down before cleaning.
  • Čiščenje zunanjosti: Zunanjost tiskalnika obrišite z mehko, suho krpo. Izogibajte se uporabi agresivnih kemikalij ali abrazivnih materialov.
  • Shranjevanje: Tiskalnik shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
  • Vzdrževanje baterije: For long-term storage, charge the battery to about 50% every three months to prevent deep discharge.

8. Odpravljanje težav

If you encounter issues with your CLABEL 220B printer, refer to the following common problems and solutions:

TežavaMožen vzrokrešitev
Tiskalnik se ne vklopiNizka baterija ali težava z napajanjemCharge the printer fully. Ensure the power button is pressed correctly.
Poor print quality (light or spotty)Dirty print head, incorrect label type, or low batteryClean the print head. Ensure you are using thermal labels. Charge the printer. Adjust print density in the app if available.
Labels are misaligned or jammedLabels not loaded correctlyOpen the cover, re-align the label roll, and ensure it's properly seated. Refer to Section 4.2.
Ni mogoče vzpostaviti povezave prek BluetoothBluetooth izklopljen, težava z aplikacijo ali tiskalnik ni mogoče zaznatiEnsure Bluetooth is enabled on your phone and the printer is on. Restart the app and printer. Try re-pairing the device.
PC connection issuesDriver not installed, incorrect cable, or software issueInstall the correct driver from the CLABEL website. Ensure the USB cable is functional. Restart PC and printer.

If the problem persists, please contact CLABEL customer support for further assistance.

9. Specifikacije

Key technical specifications for the CLABEL 220B Thermal Bluetooth Label Printer:

  • Model: 220B
  • Tehnologija tiskanja: Toplotna
  • Povezljivost: Bluetooth, USB
  • Izhod tiskalnika: Enobarvno
  • Največja ločljivost tiskanja: 203 DPI
  • Največja velikost medija: 25-50mm (width)
  • Združljive naprave: Smartphones (iOS, Android), Windows XP or above
  • Kapaciteta baterije: 2200 mAh
  • Poraba energije: 2.2 W (vklopljeno)
  • Dimenzije izdelka: 4.65"D x 4.6"Š x 2.88"V
  • Teža artikla: 14.1 unče (400 grama)

10. Garancija in podpora

The CLABEL 220B Thermal Bluetooth Label Printer comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official CLABEL webmesto.

For additional support, including detailed user guides and installation manuals, please refer to the following resources:

For technical assistance or customer service inquiries, please contact CLABEL support through their official channels.

Povezani dokumenti - 220B

Prejview Izdelovalec etiket CLABEL: Navodila za namestitev aplikacije in gonilnikov Clabel Trade
Celovit vodnik za namestitev aplikacije in gonilnikov Clabel Trade za naprave iOS, Android in Windows. Naučite se, kako priključiti tiskalnik etiket CLABEL za nemoteno delovanje.
Prejview Prenosni etiketirnik CLABEL 220B: Pogosta vprašanja in navodila za uporabo
Pridobite odgovore na pogosta vprašanja o prenosnem tiskalniku etiket CLABEL 220B, vključno z nastavitvijo, tiskanjem, povezljivostjo aplikacij in odpravljanjem težav. Naučite se nalagati papir, izboljšati kakovost tiskanja in se obrniti na podporo.
Prejview Uporabniški priročnik za tiskalnik etiket Clabel CT221B - Navodila za nastavitev in uporabo
Raziščite tiskalnik nalepk Clabel CT221B s tem obsežnim uporabniškim priročnikom. Spoznajte embalažo, komponente, funkcije, nalaganje papirja, mobilno/računalniško tiskanje in odpravljanje težav. Na voljo v več jezikih.
Prejview Prenosni tiskalnik etiket Clabel CT520B: Navodila za uporabo in vodnik
Obsežen priročnik z navodili za uporabo prenosnega tiskalnika etiket Clabel CT520B. Več o embalaži in izdelkuview, preparation, mobile printing guide, common problems, and technical specifications. Connect via Bluetooth and use the Clabel mini app for easy label creation.
Prejview Navodila za uporabo prenosnega tiskalnika etiket Clabel CT520B
Instruction manual for the Clabel CT520B portable label printer. Learn how to set up, operate, and troubleshoot your device using the Clabel mini app for wireless Bluetooth label printing. Includes packing list, product overview, preparation steps, mobile printing guide, common problems, and technical specifications.
Prejview Navodila za uporabo prenosnega tiskalnika etiket Clabel CT520B
User manual for the Clabel CT520B portable label printer. Learn about setup, mobile printing, and troubleshooting for this wireless thermal label maker.