Einhell TE-MA 1700 Wall Chaser Instruction Manual

1. Uvod

The Einhell TE-MA 1700 wall chaser is designed for cutting horizontal and vertical grooves and channels in masonry, primarily for laying pipes and cables. This tool facilitates precise cutting operations on hard materials, offering an efficient alternative to manual methods. Its 1700 W motor drives two parallel cutting discs, enabling accurate groove creation. The tool features continuous adjustment of cutting depth and individual width adjustment for various groove sizes. Safety features include soft start and overload protection. A guide roller and auxiliary handle provide a secure grip for controlled use. The spindle lock system simplifies disc changes. An adapter is included for connecting a wet/dry vacuum cleaner to reduce dust during operation. The 4-meter power cable provides a flexible working range. The product is supplied with a transport case and four diamond cutting discs.

2. Varnostna navodila

Always observe general safety regulations when operating power tools. Read and understand all instructions before use. Keep this manual for future reference.

• Osebna zaščitna oprema: Always wear safety goggles, hearing protection, a dust mask, and work gloves when operating the wall chaser.
• Delovno območje: Poskrbite, da bo delovno območje čisto, dobro osvetljeno in prosto. Ne dovolite dostopa mimoidočim in otrokom.
• Električna varnost: Ensure the power supply matches the tool's specifications. Do not use the tool in damp or wet conditions. Avoid damaging the power cable.
• Ravnanje z orodjem: Maintain a firm grip on the tool with both hands. Do not overreach. Ensure stable footing.
• Varnost diska: Only use cutting discs specified for this tool. Ensure discs are correctly installed and tightened before operation. Inspect discs for damage before each use.
• Upravljanje prahu: Connect a suitable dust extraction system to minimize dust exposure.
• Zaščita pred preobremenitvijo: The tool is equipped with overload protection. If the tool stops due to overload, release the trigger and allow it to cool before resuming operation.
• Mehki zagon: The soft start feature ensures a gradual increase in speed, reducing kickback and improving control.
• Vzdrževanje: Pred kakršnimi koli nastavitvami, menjavo pribora ali vzdrževanjem orodje izključite iz električnega omrežja.

3. Izdelek je končanview

Familiarize yourself with the components of your Einhell TE-MA 1700 Wall Chaser.

Slika 3.1: Spredaj view of the Einhell TE-MA 1700 Wall Chaser.

Vključene komponente:

• Einhell TE-MA 1700 Wall Chaser
• 1 šestnajstiški ključ
• 1 Transport Case
• 4 Diamond Cutting Discs (Ø 150 mm)

Figure 3.2: The wall chaser with its transport bag, diamond cutting discs, and hex key.

Ključne značilnosti:

• Nastavljiva globina reza: The cutting depth can be continuously adjusted up to 40 mm.
• Nastavljiva širina rezanja: The cutting width can be individually set up to 38 mm.
• Zaklepanje vretena: Facilitates easy and secure changing of cutting discs.
• Dust Extraction Adapter: For connection to a vacuum cleaner to maintain a clean work environment.
• Mehki zagon: Ensures a smooth start-up of the motor.
• Zaščita pred preobremenitvijo: Ščiti motor pred poškodbami zaradi prekomerne obremenitve.
• Guide Roller and Auxiliary Handle: Provide enhanced control and comfortable handling.

4. Nastavitev

4.1. Installing Cutting Discs

1. Prepričajte se, da je orodje izklopljeno iz električnega omrežja.
2. Pritisnite in držite gumb za zaklepanje vretena.
3. Use the hex key to loosen the clamping nut and remove the outer flange.
4. Place the diamond cutting discs onto the spindle, ensuring the rotation direction arrows on the discs match the arrow on the tool. For two discs, place a spacer between them.
5. Reinstall the outer flange and tighten the clamping nut securely with the hex key while holding the spindle lock button.

Figure 4.1: Spindle lock button for disc changes.

4.2. Nastavitev globine reza

The cutting depth can be adjusted continuously to suit your application.

1. Odvijte gumb za nastavitev globine.
2. Move the guide plate to the desired depth indicated on the scale (up to 40 mm).
3. Tighten the depth adjustment knob firmly to secure the setting.

Figure 4.2: Cutting depth adjustment mechanism.

4.3. Adjusting Cutting Width

The cutting width can be adjusted by adding or removing spacers between the cutting discs.

1. Follow the steps for installing cutting discs (Section 4.1).
2. Insert or remove spacers as needed to achieve the desired cutting width (up to 38 mm).
3. Ensure all components are securely tightened before operation.

4.4. Priključitev odsesavanja prahu

For a cleaner work environment and improved visibility, connect a wet/dry vacuum cleaner to the dust extraction adapter.

1. Attach the hose of a suitable wet/dry vacuum cleaner to the dust extraction port on the wall chaser.
2. Prepričajte se, da je povezava varna, da preprečite uhajanje prahu.

Figure 4.3: Dust extraction connection.

5. Delovanje

5.1. Starting the Tool

After ensuring all safety precautions are met and the setup is complete:

1. Orodje priključite na ustrezno električno vtičnico.
2. Orodje trdno držite z obema rokama.
3. Press the ON/OFF switch. The soft start feature will gradually bring the discs to full speed.

5.2. Cutting Technique

The Einhell TE-MA 1700 is designed for a pulling cut motion.

1. Position the tool with the guide plate flat against the workpiece.
2. Engage the power switch.
3. Slowly guide the tool along the desired cutting line, pulling it towards you. Apply steady, even pressure.
4. Avoid forcing the tool, as this can trigger the overload protection.
5. For deeper channels, multiple passes may be required.
6. After cutting, the material between the two grooves can be removed using a hammer drill or chisel.

Figure 5.1: Proper operation of the wall chaser.

5.3. Working on Different Materials

This wall chaser is suitable for masonry materials. Always ensure the diamond cutting discs are appropriate for the specific material being cut.

6. Vzdrževanje

Regular maintenance ensures the longevity and performance of your tool. Always disconnect the power plug before any maintenance work.

6.1. Čiščenje

• After each use, clean the tool thoroughly, especially the ventilation slots and the area around the cutting discs.
• Use a brush or compressed air to remove dust and debris. Do not use water or chemical cleaning agents.
• Prepričajte se, da odprtina za odsesavanje prahu ni zamašena.

6.2. Zamenjava diska

Replace cutting discs when they become worn or damaged. Refer to Section 4.1 for disc installation instructions.

6.3. Shranjevanje

• Store the wall chaser in its transport case in a dry, secure place, out of reach of children.
• Pred shranjevanjem se prepričajte, da je orodje čisto in brez ostankov.

7. Odpravljanje težav

8. Specifikacije

9. Garancija in podpora

This Einhell product comes with a limited or full warranty, as specified at the time of purchase. Spare parts are available for a period of 1 year.

For warranty claims, technical assistance, or spare parts, please contact Einhell customer support or your authorized dealer. Keep your proof of purchase for warranty validation.

For more information, visit the official Einhell webspletno mesto ali pa se obrnite na kontaktne podatke, ki so navedeni na embalaži izdelka.