Tommee Tippee Perfect Prep Day & Night Baby Bottle Maker Machine

Uvod

The Tommee Tippee Perfect Prep Day & Night machine is designed to simplify the process of preparing baby formula bottles. It provides a fresh formula feed at the correct temperature in just 2 minutes, significantly faster than traditional methods. This machine incorporates an antibacterial filter to remove impurities from tap water and utilizes a 70°C hot shot to kill bacteria in the formula, ensuring a safe and perfectly prepared bottle for your baby.

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Perfect Prep Day & Night machine. Please read it thoroughly before first use and keep it for future reference.

Image: The Tommee Tippee Perfect Prep Day & Night machine, shown with a baby bottle and a replacement water filter, highlighting its compact design and key components.

Image: A diagram detailing the core benefits of the Perfect Prep machine, including its speed, the function of the antibacterial filter, and the safety provided by the 70°C hot shot.

Pomembne varnostne informacije

Always follow basic safety precautions when using electrical appliances. Failure to do so may result in fire, electric shock, or injury.

• Pred uporabo natančno preberite vsa navodila.
• Naprave, napajalnega kabla ali vtiča ne potapljajte v vodo ali druge tekočine.
• Ta naprava je samo za uporabo v gospodinjstvu. Ne uporabljajte na prostem.
• Always place the appliance on a dry, stable, heat-resistant surface.
• Hraniti izven dosega otrok. Ta naprava ni namenjena uporabi s strani oseb z zmanjšanimi telesnimi, senzoričnimi ali duševnimi sposobnostmi ali brez izkušenj in znanja, razen če so pod nadzorom ali so jim dali navodila glede uporabe naprave s strani osebe, odgovorne za njihovo varnost.
• Izvlecite vtič iz vtičnice, ko ga ne uporabljate in pred čiščenjem. Pustite, da se ohladi, preden namestite ali odstranite dele in preden očistite aparat.
• Ne uporabljajte naprave s poškodovanim kablom ali vtičem oziroma po okvari naprave ali njeni kakršni koli poškodbi. Za pregled, popravilo ali nastavitev se obrnite na službo za stranke.
• Uporaba dodatkov, ki jih proizvajalec naprave ne priporoča, lahko povzroči požar, električni udar ali telesne poškodbe.
• Kabel naj ne visi čez rob mize ali pulta ali se dotika vročih površin.
• Ne postavljajte na ali blizu vročega plinskega ali električnega gorilnika ali v segreto pečico.
• Vedno najprej priključite vtič na napravo, nato pa priključite kabel v stensko vtičnico. Za izklop izklopite kateri koli gumb in nato izvlecite vtič iz stenske vtičnice.
• Naprave ne uporabljajte za namene, ki niso predvideni.

Nastavitev

Before first use, ensure all packaging materials are removed and the machine is clean. It is crucial to perform the initial clean cycle and install the filter correctly.

Initial Clean Cycle

1. Place the machine on a clean, dry, flat surface.
2. Priključite stroj v stensko vtičnico.
3. Fill the water tank with cold tap water. Do not exceed the maximum fill line.
4. Place an empty container (minimum 500ml) under the dispenser spout.
5. Press the clean cycle button (refer to your machine's display for the specific icon). The machine will dispense hot water to clean the internal components.
6. Once the cycle is complete, discard the water from the container.

Installing the Antibacterial Filter

The Perfect Prep machine uses a unique antibacterial filter designed to remove bacteria and other impurities from water.

1. Odstranite filter iz embalaže.
2. Submerge the filter completely in a bowl of cold tap water for 10 minutes. This is important to remove any air bubbles.
3. Lift the water tank lid and remove the existing filter holder (if any).
4. Insert the new filter into the filter holder, ensuring it clicks securely into place.
5. Place the filter holder with the new filter back into the water tank.
6. Fill the water tank with cold tap water up to the maximum fill line.
7. Perform a filter prime cycle (refer to your machine's display for instructions). This will flush the filter and prepare it for use.

Slika: Podrobna view of the machine's water tank, illustrating where water is stored and its transparent design for easy level monitoring.

Image: A close-up of the antibacterial water filter, showing its design and the blue top indicating it's a genuine Tommee Tippee filter.

Navodila za uporabo

The Perfect Prep Day & Night machine is designed for quick and easy bottle preparation. Follow these steps for each feed.

1. Pripravite steklenico: Ensure your baby bottle is clean and sterilized. Add the required number of formula scoops to the bottle according to the formula manufacturer's instructions. Do not add water to the formula at this stage.
2. Postavite steklenico: Place the prepared bottle on the bottle stand under the dispenser spout. Ensure it is centered and stable.
   

   Image: A parent carefully positioning a baby bottle under the dispenser spout of the Perfect Prep machine, ready for formula preparation.

3. Izberite glasnost: Use the digital display and control buttons to select the desired feed volume (e.g., 4oz, 6oz, 8oz). The machine will indicate when it is ready to dispense.
4. Dispense Hot Shot: Press the start button. The machine will dispense a "hot shot" of water (70°C) into the bottle. This hot shot helps to dissolve the formula powder and kills any potential bacteria present in the formula.
   

   Image: Water being dispensed into a baby bottle, illustrating the "hot shot" phase where the initial hot water mixes with the formula powder.
5. Mix Formula: Remove the bottle from the stand and place the lid on it. Shake the bottle well to ensure the formula powder is fully dissolved.
6. Top Up with Cold Water: Place the bottle back on the stand. The machine will then dispense the remaining cooler water to complete the feed to the selected volume and bring it to body temperature.
   

   Slika: Bližnji posnetek view of a baby bottle inside the Perfect Prep machine, demonstrating the final stage of water dispensing to achieve the desired volume and temperature.

7. Preverite temperaturo: Always check the temperature of the feed before giving it to your baby by dropping a few drops onto the inside of your wrist. It should feel lukewarm.

The machine's soft glow lights and low volume operation are designed to minimize disruption during night feeds.

Vzdrževanje

Regular maintenance ensures the longevity and hygienic operation of your Perfect Prep machine.

Dnevno čiščenje

• Wipe down the exterior of the machine with a clean, damp krpo.
• Empty and rinse the water tank daily. Refill with fresh cold tap water.
• Clean the bottle stand and drip tray with warm soapy water and rinse thoroughly.

Zamenjava filtra

The antibacterial filter needs to be replaced regularly. The machine's display will indicate when a filter change is due, typically every 3 months or after 150 litres of water, whichever comes first.

1. Follow the "Installing the Antibacterial Filter" steps from the Setup section.
2. Always use genuine Tommee Tippee Perfect Prep replacement filters to ensure proper filtration and machine function.

Odstranjevanje vodnega kamna

Over time, mineral deposits can build up inside the machine. The machine will prompt you when descaling is required, typically every 4 weeks.

1. Izpraznite rezervoar za vodo.
2. Odstranite filter.
3. Prepare a descaling solution according to the instructions on a food-grade descaler (e.g., citric acid solution or a descaler specifically for baby appliances).
4. Raztopino za odstranjevanje vodnega kamna nalijte v rezervoar za vodo.
5. Place an empty container under the dispenser.
6. Initiate the descaling cycle as prompted by the machine's display.
7. After the descaling cycle, rinse the tank thoroughly and perform two full clean cycles with fresh cold water to flush out any remaining descaler.

Odpravljanje težav

If you encounter issues with your Perfect Prep machine, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Tommee Tippee customer support for further assistance.

Specifikacije

Garancija in podpora

Tommee Tippee products are designed with quality and reliability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official Tommee Tippee webmesto.

If you require technical assistance, have questions about your product, or need to claim warranty, please contact Tommee Tippee customer support:

• Webspletno mesto: www.tommeetippee.com (Preverite lokalne kontaktne podatke)
• Spletna podpora: Many common questions can be answered through the FAQ or support sections of the webmesto.

Ko se obrnete na podporo, imejte pripravljeno številko modela izdelka (29449510) in datum nakupa.