Amazon Basics ASD2401-01E

Uporabniški priročnik za akumulatorski izvijač Amazon Basics

Model: ASD2401-01E

1. Uvod

Thank you for choosing the Amazon Basics Cordless Rechargeable Screwdriver. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before using the product and keep it for future reference.

Diagram showing features of the Amazon Basics Cordless Screwdriver

Slika 1: konecview of the Amazon Basics Cordless Rechargeable Screwdriver with key features highlighted, including torque settings, LED light, USB-C charging port, and 1/4" quick change collet.

2. Vsebina paketa

Ensure all items listed below are present in your package. If any items are missing or damaged, please contact customer support.

  • 1 x Amazon Basics 3.6V (4V max.) Cordless Screwdriver
  • 1 x Integrated 2000 mAh Lithium-ion Rechargeable Battery (pre-installed)
  • 1 x polnilni kabel USB-C
  • 1 x 10-piece Bit Set (including various Phillips, Slotted, and Pozidriv bits)
Contents of the Amazon Basics Cordless Screwdriver package

Slika 2: The complete package contents, showing the cordless screwdriver, USB-C charging cable, and the 10-piece bit set with a bit holder.

3. Varnostne informacije

Pri uporabi električnega orodja vedno upoštevajte osnovne varnostne ukrepe, da zmanjšate tveganje požara, električnega udara in telesnih poškodb.

Splošna varnostna pravila:

  • Varnost na delovnem območju: Delovno območje naj bo čisto in dobro osvetljeno. Nered ali temna območja lahko povzročijo nesreče. Ne uporabljajte električnega orodja v eksplozivnih okoljih, na primer v prisotnosti vnetljivih tekočin, plinov ali prahu.
  • Električna varnost: Izogibajte se telesnemu stiku z ozemljenimi površinami (npr. cevmi, radiatorji, štedilniki, hladilniki). Električnega orodja ne izpostavljajte dežju ali mokrim razmeram.
  • Osebna varnost: Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. Always wear appropriate personal protective equipment, such as safety glasses, dust mask, non-skid safety shoes, hard hat, or hearing protection.
  • Uporaba in nega orodja: Ne silite električnega orodja. Uporabljajte pravilno električno orodje za vašo nalogo. Ne uporabljajte električnega orodja, če stikalo ne deluje. Preden izvajate kakršne koli nastavitve, menjate pribor ali shranjujete električno orodje, izključite vtič iz vtičnice in/ali odstranite baterijo iz električnega orodja.
  • Uporaba in nega baterijskega orodja: Polnite samo s polnilnikom, ki ga je določil proizvajalec. Električno orodje uporabljajte samo s posebej za to namenjenimi baterijskimi paketi.

4. Nastavitev

4.1 Polnjenje izvijača

The screwdriver comes with an integrated rechargeable Lithium-ion battery. Before first use, fully charge the battery.

  1. Locate the USB-C charging port on the screwdriver (usually at the base or side).
  2. Connect the provided USB-C charging cable to the screwdriver's charging port.
  3. Connect the other end of the USB-C cable to a compatible USB power adapter (not included, 5V max. 1A recommended) or a USB port on a computer.
  4. The charging indicator light (if present) will illuminate during charging and change color or turn off when fully charged.
  5. Charging is easy via USB anywhere.
USB-C charging cable and bit set for the screwdriver

Slika 3: The USB-C charging cable and the 10-piece bit set, essential accessories for the screwdriver's operation and maintenance.

4.2 Namestitev/menjava nastavkov

The screwdriver features a 1/4" quick change hexagonal collet for fast and easy bit changes.

  1. Ensure the screwdriver is turned off and not operating.
  2. Insert the desired 1/4" hexagonal screwdriver bit firmly into the collet until it clicks into place.
  3. Če želite odstraniti del, ga izvlecite naravnost iz vpenjalne klešče.

5. Navodila za uporabo

5.1 Powering On and Direction Control

The screwdriver is operated by pressing the forward or reverse buttons.

Vrh view of the Amazon Basics Cordless Screwdriver showing control buttons

Slika 4: Vrh view of the screwdriver highlighting the forward and reverse buttons, and the torque setting indicator.

  • Pritisnite gumb naprej (usually indicated by an arrow pointing right or forward) to drive screws.
  • Pritisnite reverse button (usually indicated by an arrow pointing left or backward) to remove screws.
  • Spustite gumb, da ustavite izvijač.

5.2 Nastavitve navora

The screwdriver offers 3 adjustable torque settings (low, medium, high) to suit different applications and prevent overtightening or stripping screws.

  • Press the torque adjustment button (often labeled "MAX" or with a torque icon) to cycle through the settings.
  • Select a lower torque for delicate materials or small screws, and a higher torque for tougher materials or larger screws.
  • Največji navor je 5 Nm.

5.3 integrirane LED luči

Two integrated LED lights illuminate the work area, improving visibility in low-light conditions.

  • The LED lights typically activate automatically when the screwdriver is in operation.
Person using the Amazon Basics Cordless Screwdriver to install a hinge

Slika 5: The cordless screwdriver being used to install a hinge on a cabinet, demonstrating its compact size and utility in tight spaces.

6. Vzdrževanje

6.1 Čiščenje

  • Pred čiščenjem vedno izključite orodje iz katerega koli vira napajanja.
  • Zunanjost orodja obrišite z mehko krpoamp krpo. Ne uporabljajte močnih kemikalij ali abrazivnih čistil.
  • Prezračevalne odprtine naj bodo čiste od prahu in umazanije.

6.2 Shranjevanje

  • Izvijač shranjujte na suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
  • Pred dolgotrajnim shranjevanjem se prepričajte, da je baterija delno napolnjena, da ohranite njeno zdravje.
  • Hraniti izven dosega otrok.

7. Odpravljanje težav

TežavaMožen vzrokrešitev
Izvijač se ne vklopi.Baterija je prazna.Baterijo popolnoma napolnite s priloženim kablom USB-C.
Screwdriver stops during operation.Overload protection activated / Battery low.Reduce pressure on the tool. Allow it to cool down. Recharge the battery.
Bit slips or screw head strips.Incorrect bit size / Torque setting too high.Ensure the correct bit size is used for the screw. Adjust to a lower torque setting.
Indikator polnjenja ne deluje.Okvarjen kabel ali vir napajanja.Poskusite z drugim kablom USB-C ali napajalnikom. Prepričajte se, da so povezave trdne.

8. Specifikacije

Številka modelaASD2401-01E
voltage3.6 V (največ 4 V)
Vrsta baterijeIntegrated Lithium-ion, 2000 mAh
Hitrost brez obremenitveDo 300 RPM
Max Torque5 Nm
Nastavitve navora3 (nizka, srednja, visoka)
Velikost vpenjalne cevi1/4" Hexagonal
Vrata za polnjenjeUSB-C
Dimenzije (D x Š x V)3.51 x 3.61 x 17.7 cm (približno 1.38 x 1.42 x 6.97 palca)
Teža299.37 gramov (približno 0.66 funta)
Država izvoraKitajska
Spodaj view of the Amazon Basics Cordless Screwdriver with product label

Slika 6: The product label on the underside of the screwdriver, displaying model number, voltage in podrobnosti izdelave.

9. Garancija in podpora

This Amazon Basics product is covered by a 5-letna garancija na orodje. For warranty claims or technical support, please contact Amazon customer service. Information regarding spare parts availability is currently not provided.

For returns, the standard return policy allows for refunds or replacements within 30 days, as per Amazon's policy.

Za dodatno pomoč obiščite Osnovna trgovina Amazon.

© 2024 Amazon. Vse pravice pridržane.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.