Uvod
The Keychron K6 Pro is a 65% layout wireless custom mechanical keyboard designed for enhanced typing experience and versatility. It features QMK/VIA programmability, hot-swappable switches, and supports both Bluetooth 5.1 wireless and USB-C wired connections. This keyboard is compatible with macOS, Windows, and Linux operating systems.
Vsebina paketa
Please verify that all items are present in your Keychron K6 Pro package:
- 1x popolnoma sestavljena tipkovnica
- 1x kabel tipa A do tipa C
- 1x Mac and Windows Keycaps Set
- 1x snemalnik ključev
- 1x snemalnik stikala
- 1x Šestnajsti ključ
- 1x Screwdriver (located at the bottom of the box)
Nastavitev
1. Priključitev tipkovnice
The K6 Pro supports both wireless Bluetooth 5.1 and wired USB-C connections.
Povezava Bluetooth:
- Ensure the keyboard's mode switch (located on the side) is set to 'Bluetooth'.
- On your device (laptop, phone, tablet), enable Bluetooth and search for 'Keychron K6 Pro'.
- Select the keyboard to pair. The keyboard can connect to up to 3 devices simultaneously. Switch between paired devices using Fn1 + Q, Fn1 + W, or Fn1 + E.
Žična povezava:
- Ensure the keyboard's mode switch is set to 'Cable'.
- Tipkovnico priključite na računalnik s priloženim kablom USB-C.
2. Stikalo operacijskega sistema
The K6 Pro has a dedicated switch to toggle between macOS and Windows layouts. Locate the switch on the side of the keyboard and set it to your desired operating system for optimal key functionality.
3. Polnjenje tipkovnice
Connect the USB-C cable to the keyboard and a power source (e.g., computer USB port, wall adapter). The keyboard features a rechargeable battery. An indicator light will show charging status.
Delovanje
1. Key Combinations (Fn Keys)
The K6 Pro utilizes Fn (Function) key combinations to access various features and multimedia controls. Refer to the tables below for common combinations:
Fn1 + Keys:
Fn2 + Keys:
2. Prilagoditev QMK/VIA
The K6 Pro is fully programmable with QMK/VIA firmware. This allows you to remap any key, create macro commands, and customize lighting effects. To use QMK/VIA:
- Connect the keyboard to your computer via USB-C cable.
- Download and install the VIA software or access the VIA web aplikacija.
- Follow the on-screen instructions to customize your keymap and macros. Note: Key remapping is performed in wired mode, but the changes apply to both wired and wireless modes.
3 Stikala z možnostjo vroče menjave
The K6 Pro features hot-swappable sockets, allowing you to change mechanical switches without soldering. It supports most 3-pin and 5-pin MX mechanical switches.
- To remove a switch, use the provided switch puller to gently grip and pull the switch upwards.
- Za namestitev novega stikala poravnajte nožice novega stikala z luknjami na tiskanem vezju in trdno pritisnite navzdol, da se zaskoči. Prepričajte se, da nožice niso upognjene.
4. Nadzor osvetlitve ozadja RGB
The keyboard features RGB backlighting. Use Fn1 + Light effect key to cycle through different backlight effects. Use Fn2 + Left/Right arrow keys to change backlight colors.
Vzdrževanje
1. Čiščenje tipkovnice
Za čiščenje tipkovnice jo najprej izključite iz vseh virov napajanja. Uporabite mehko krpo, ki ne pušča vlaken, rahlo navlaženo.ampened with water or a mild cleaning solution. For deeper cleaning, remove keycaps using the provided keycap puller and use compressed air to clear debris from between switches.
2. Zamenjava stikala in tipkovnice
As the K6 Pro is hot-swappable, you can easily replace individual switches or keycaps. Use the provided tools for safe removal and installation. Ensure proper alignment to avoid damaging pins or sockets.
Odpravljanje težav
- Tipkovnica se ne povezuje prek Bluetootha: Ensure the keyboard is in Bluetooth mode and discoverable. Remove previous pairings from your device and try pairing again. Ensure the keyboard is charged.
- Tipke se ne odzivajo: Check if the keyboard is in the correct operating system mode (Mac/Windows). If using wired mode, ensure the cable is securely connected. If a specific key is not working, consider hot-swapping the switch for a new one.
- Težave z osvetlitvijo ozadja: Use the Fn key combinations to adjust brightness or cycle through effects. Ensure the keyboard is not in a low-power state.
- QMK/VIA not detecting keyboard: Ensure the keyboard is connected via USB-C cable and the mode switch is set to 'Cable'. Restart the VIA software or web aplikacija.
Specifikacije
| Znamka | Keychron |
| Ime modela | Keychron K6 Pro |
| Številka modela | K6P-H1 |
| Tehnologija povezljivosti | Bluetooth 5.1, USB-C |
| Razporeditev tipkovnice | 65% (68 keys), QWERTY |
| Mechanical Switch Model | Keychron K Pro Red (Linear) |
| Hot-swappable | Yes (3-pin and 5-pin MX mechanical switches) |
| Osvetlitev ozadja | RGB |
| Programabilnost | QMK/VIA enabled |
| Združljivi operacijski sistemi | macOS, Windows, Linux |
| Vir napajanja | Akumulatorska baterija |
| Material | Plastic enclosure, Steel plate |
| Dodatne funkcije | PCB-mounted screw-in stabilizers, Sound-absorbing foam, Silicone dampening bottom pad, Double-shot PBT Keycaps |
Garancija
The Keychron K6 Pro comes with a 1-year limited warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Keychron webspletno mesto ali se obrnite na podporo strankam.
Podpora
For further assistance, technical support, or to download the latest firmware and VIA software, please visit the official Keychron webspletno mesto. Za dodatno pomoč lahko najdete tudi pogosta vprašanja in forume skupnosti.