OnLyee CR1018i Vibrating Alarm Clock User Manual

1. Uvod

The OnLyee CR1018i Vibrating Alarm Clock is designed to provide a reliable wake-up experience for heavy sleepers and individuals with hearing impairment. It combines a powerful bed shaker with a loud audible alarm and customizable display settings. This manual provides detailed instructions for setup, operation, and maintenance of your new alarm clock.

2. Kaj je v škatli

• OnLyee CR1018i Vibrating Alarm Clock
• Bed Shaker (1.8m cable)
• 1.5m USB Power Cable + DC Plug
• Uporabniški priročnik (ta dokument)
• 1 CR2032 battery (for backup, may not be pre-installed)

Image: Contents of the OnLyee CR1018i package, including the alarm clock, bed shaker, and cables.

3. Izdelek je končanview

3.1 Sprednji zaslon

The front of the alarm clock features an 8.7-inch HD LED mirror display, showing the time clearly. The mirrored surface can also be used as a functional mirror when the display is off or dimmed.

Image: The 8.7-inch LED mirror display showing the time.

3.2 Top Buttons

Control buttons are located on the top of the alarm clock for easy access to settings such as dimmer, hour, minute, time format, snooze, alarm settings, volume, and alarm off.

Slika: Konecview of the control buttons on the top of the alarm clock.

3.3 Rear Ports and Switches

The rear of the unit includes the DC power input, a 5V/1A USB-A charging port, a vibrator port for the bed shaker, and a switch to select alarm modes (Buzz, Buzz/Vib, Vib).

Image: The back panel of the alarm clock with power input, USB charging port, vibrator port, and alarm mode switch.

4. Nastavitev

1. Napajalni priključek: Connect the 1.5m USB power cable to the DC 5V input port on the back of the alarm clock. Plug the DC plug into a standard wall outlet. The display will light up.
2. Rezervna baterija (neobvezno): If not already installed, insert 1 CR2032 battery into the battery compartment on the back of the clock. This battery provides backup for time and alarm settings during power outages, but does not power the display.
3. Connect Bed Shaker: Plug the bed shaker's 1.8m cable into the "VIBRATOR PORT" on the back of the alarm clock.
4. Position Bed Shaker: Za optimalno vibracijo postavite stresalnik pod blazino ali vzmetnico.

Image: The alarm clock and bed shaker set up on a nightstand, with a phone charging via the USB port.

5. Navodila za uporabo

5.1 Čas nastavitve

1. Pritisnite in držite TIME 12H/24H za vstop v način nastavitve časa. Številke za ure bodo utripale.
2. Pritisnite URA gumb za nastavitev ure.
3. Pritisnite MINUTA gumb za nastavitev minute.
4. Pritisnite TIME 12H/24H button again to confirm and exit time setting, or wait a few seconds for it to automatically save.
5. To switch between 12-hour and 24-hour format, short press the TIME 12H/24H gumb.

5.2 Nastavitev alarmov (Alarm 1 in Alarm 2)

Ura podpira dva neodvisna alarma.

1. Pritisnite in držite ALARM 1 or ALARM 2 gumb za vstop v način nastavitve alarma. Številke za ure bodo utripale.
2. Pritisnite URA gumb za nastavitev budilke.
3. Pritisnite MINUTA gumb za nastavitev minute alarma.
4. Pritisnite ustrezno ALARM button again to confirm and exit alarm setting. The alarm icon will appear on the display, indicating it is active.
5. To deactivate an alarm, short press the corresponding ALARM gumb, dokler njegova ikona ne izgine z zaslona.

5.3 Funkcija dremeža

Ko se oglasi alarm, pritisnite veliko DREMEŽ button on top to temporarily silence the alarm for 9 minutes. The alarm will sound again after 9 minutes. To turn off the alarm completely, press the ALARM IZKL gumb.

5.4 Prilagajanje svetlosti zaslona

The display has 8 levels of brightness. Press the DIMMER button repeatedly to cycle through the brightness levels (L7 being brightest, L0 being off). Select the desired brightness for your environment.

Image: Visual representation of the 8 brightness levels for the LED display.

5.5 Alarm Modes (Buzz, Buzz/Vib, Vib)

Use the switch on the back of the alarm clock to select your preferred wake-up mode:

• BUZZ: Only the audible alarm will sound.
• BUZZ/VIB: Both the audible alarm and the bed shaker will activate.
• VIB: Only the bed shaker will activate, providing silent vibration.

Image: Illustration of the three available alarm modes: audible buzz, bed shaker, and a combination of both.

5.6 vrata za polnjenje USB

The alarm clock includes a built-in 5V/1A USB-A charging port on the back. You can use this port to charge your smartphone or other USB-powered devices overnight, eliminating the need for an additional wall adapter.

6. Vzdrževanje

• Clean the alarm clock and bed shaker with a soft, dry cloth.
• Ne uporabljajte abrazivnih čistil ali topil.
• Napravo hranite stran od vode in prekomerne vlage.
• Zagotovite ustrezno prezračevanje okoli enote.

7. Odpravljanje težav

8. Specifikacije

• Znamka: OnLyee
• Številka modela: CR1018i
• Vrsta zaslona: Digital LED Mirror
• Velikost zaslona: 8.7 palcev
• Stopnje svetlosti: 8 (nastavljivo)
• Načini alarma: Vibration, Sound+Vibration, Sound
• Glasnost alarma: Do 120dB
• Alarmi: Dual Independent Alarms
• Trajanje dremeža: 9 minute
• Format časa: 12H/24H Switchable
• Vrata za polnjenje USB: 5V/1A USB-A Output
• vir energije: Električni z žico (DC 5V)
• Rezervna baterija: 1 CR2032 (for time/alarm settings memory)
• Dimenzije izdelka: 8"W x 8"H (Note: This dimension may refer to packaging or a specific aspect; actual clock dimensions are typically rectangular.)
• Teža artikla: 13.8 unč
• Material: Akrilonitril butadien stiren

9. Garancija in podpora

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official OnLyee webmesto. Shranite račun za garancijske zahtevke.