Bluetooth slušalka AOPUTTRIVER AP-570S-APPamp Uporabniški priročnik za merilnik

1. Uvod

AOPUTTRIVER AP-570S-APP je prenosni, visokozmogljivi digitalni klaviatura...amp meter designed for accurate measurement of various electrical parameters. This device features Bluetooth connectivity, allowing it to pair with mobile phones for data logging and analysis. It is suitable for troubleshooting electrical problems in home improvement, appliance repair, line maintenance, and car repair applications.

Image 1.1: The AP-570S-APP Clamp Meter being used in different electrical measurement scenarios, including home wiring, appliance repair, and automotive diagnostics.

2. Varnostne informacije

Please read all safety warnings and operating instructions carefully before using this instrument. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Vedno se prepričajte, da jeamp meter is in good working condition before use. Inspect for any damage to the casing, test leads, or insulation.
• Do not use the meter if it appears damaged or if the insulation is compromised.
• Upoštevajte vse lokalne in nacionalne varnostne predpise.
• Izogibajte se delu sami.
• Bodite previdni pri delu z voltagnad 30 V AC RMS, 42 V vrhom ali 60 V DC. Te vol.tagpredstavljajo nevarnost električnega udara.
• Always disconnect power to the circuit under test before making connections or disconnections, especially when measuring resistance, capacitance, or performing diode tests.
• The AP-570S-APP features a double insulation design for enhanced protection. However, always exercise caution.
• The Non-Contact Voltage (NCV) detection feature allows for voltage detection without direct contact, improving safety.
• Replace the battery promptly when the low battery indicator appears to ensure accurate readings and proper operation.

Image 2.1: The clamp meter with a rubber sleeve for protection against drops and emphasizing safety features like double insulation.

3. Značilnosti izdelka

• Multifunction Measurement: Accurately measures AC/DC Voltage (600mV-1000V), AC/DC Current (600A-1000A), Resistance (600Ω-60MΩ), Capacitance (6nF-60mF), Frequency (9.999Hz-9.999MHz), Duty Cycle, Diode, and Continuity.
• Bluetooth APP Connectivity: Connects to mobile phones (Android/iOS) via Bluetooth for real-time data display, logging, and analysis using the "AiLink" app.
• Merjenje temperature: Includes a thermocouple for temperature testing, with switchable units (℃/℉).
• Brezkontaktna voltagZaznavanje e (NCV): Varno zazna glasnost izmeničnega tokatage without direct contact, indicated by sound and light.
• Zaslon z osvetlitvijo ozadja: Large LCD with backlight for clear readings in dark environments.
• Zadrževanje podatkov: Zamrzne trenutno odčitavanje na zaslonu.
• MAX/MIN Function: Records maximum and minimum measured values.
• REL (Relative) Mode: Measures the change in a signal relative to a stored reference value.
• Samodejno/ročno nastavljanje razpona: Offers flexibility in measurement ranges.
• Double Insulation Design: Provides enhanced user safety.
• Samodejni izklop: Varčuje z baterijo.

4. Layout Introduction (Components)

Familiarize yourself with the different parts of your AOPUTTRIVER AP-570S-APP Clamp Merilnik:

Image 4.1: Detailed diagram showing the layout and functions of the clamp meter's various parts.

1. Clamp Čeljusti: Opens up to 45mm to enclose a conductor for current measurement.
2. Območje zaznavanja NCV: Area for non-contact voltage zaznavanje.
3. Ročaj za odpiranje čeljusti: Uporablja se za odpiranje in zapiranje vratamp čeljusti.
4. Vrtljivo stikalo: Izbere merilne funkcije in območja.
5. Tipka HOLD: Pritisnite, da zadržite trenutno odčitavanje. Pritisnite in držite več kot 2 sekundi, da vklopite/izklopite osvetlitev ozadja.
6. Tipka SELECT: Used to switch between functions within a rotary switch position (e.g., AC/DC voltage, diode/continuity, capacitance).
7. Tipka MAX/MIN: Press to display the maximum or minimum measured value. Press and hold for 2 seconds to exit.
8. Ključ REL: Aktivira način relativnega merjenja.
9. Ključ Hz/delovnega časa: In ACV/ACA or Hz range, press to choose between Frequency (Hz) or Duty Cycle measurement.
10. LCD zaslon: 6000-številčni digitalni zaslon s simboli vseh funkcij.
11. Vhodni priključek COM: Skupni (negativni) vhod za merilne kable.
12. VΩHzT+ Input Jack: Pozitiven vhod za volumentage, resistance, frequency, temperature, and capacitance measurements.

5. Nastavitev

5.1 Namestitev baterije

The AP-570S-APP requires a 9V battery for operation. To install or replace the battery:

1. Zagotovite clamp meter is turned OFF (Rotary Switch set to OFF).
2. Poiščite pokrov predalčka za baterije na zadnji strani merilnika.
3. Z izvijačem odprite predal za baterije.
4. Connect the 9V battery to the battery clips, observing correct polarity.
5. Place the battery into the compartment and secure the cover.

5.2 Začetni vklop

After battery installation, turn the Rotary Switch from OFF to any desired measurement function to power on the device. The LCD display will illuminate.

Image 5.1: The clamp meter shown with its packaging, carrying bag, test leads, thermocouple, and 9V battery.

6. Navodila za uporabo

To perform measurements, rotate the Rotary Switch to the desired function. Connect test leads or use the clamp jaws as appropriate for the measurement type.

6.1 Merjenje izmeničnega/enosmernega toka

1. Set the Rotary Switch to the 600A~1000A položaj.
2. Pritisnite IZBERI key to switch between AC (~) and DC (—) current measurement if necessary.
3. Odprite clamp jaws using the jaw-opening handle.
4. Enclose only one conductor with the clamp jaws. Ensure the conductor is centered within the jaws for accurate readings.
5. Odčitajte trenutno vrednost na LCD zaslonu.

Note: For currents between 0-600A, resolution is 0.1A. For 600-1000A, resolution is 1.0A.

6.2 AC/DC Voltage Merjenje

1. Set the Rotary Switch to the V— or V~ položaj.
2. Pritisnite IZBERI key to switch between AC (~) and DC (—) voltage measurement if necessary.
3. Črni testni kabel vstavite v COM vtičnico in rdeči preskusni kabel v VΩHzT+ jack.
4. Merilne sonde priključite na vezje ali komponento, ki jo želite izmeriti.
5. Preberite zvtage vrednost na LCD zaslonu.

6.3 Resistance, Diode, Continuity, and Capacitance Measurement

1. Set the Rotary Switch to the Ω položaj.
2. Pritisnite IZBERI key to cycle through Resistance (Ω), Diode Test (→|), Continuity Test (♫), and Capacitance (—||—) functions.
3. Črni testni kabel vstavite v COM vtičnico in rdeči preskusni kabel v VΩHzT+ jack.
4. Connect the test probes to the component.
5. Read the value on the LCD display. For continuity, an audible beep indicates a continuous circuit.

6.4 Merjenje frekvence in delovnega cikla

1. Set the Rotary Switch to the Hz položaj.
2. Črni testni kabel vstavite v COM vtičnico in rdeči preskusni kabel v VΩHzT+ jack.
3. Connect the test probes to the signal source.
4. Pritisnite Hz/dolžnost key to switch between Frequency (Hz) and Duty Cycle (%).
5. Preberite vrednost na LCD zaslonu.

6.5 Merjenje temperature

1. Set the Rotary Switch to the ° C / ° F položaj.
2. Insert the thermocouple into the COM in VΩHzT+ vtičnice, pri čemer upoštevajte polarnost.
3. Termočlen namestite na mesto, kjer želite izmeriti temperaturo.
4. Pritisnite IZBERI key to switch between Celsius (°C) and Fahrenheit (°F).
5. Vrednost temperature odčitajte na LCD-zaslonu.

Image 6.1: The clamp meter displaying temperature readings in both Celsius and Fahrenheit, with a thermocouple probe immersed in water.

6.6 brezkontaktna zvtage (NCV) zaznavanje

1. Set the Rotary Switch to the NCV položaj.
2. Move the NCV detection area of the meter close to the wire or conductor where voltage je sumljiv.
3. Če je voltage is detected, the meter will emit an audible beep and the NCV indicator light will illuminate.

Image 6.2: The clamp merilnik zaznavanja brezkontaktnega volumnatage near an electrical outlet, indicated by a red glow and 'bi bi' sound representation.

6.7 Funkcija osvetlitve ozadja

To activate or deactivate the backlight, press and hold the PRIDRŽI button for more than 2 seconds. The backlight improves visibility in dimly lit conditions.

Image 6.3: Comparison of the clamp meter's LCD display, showing improved readability with the backlight activated.

7. Bluetooth APP Connection

The AP-570S-APP can connect to your mobile device via Bluetooth for enhanced functionality, including data logging and analysis.

1. Prenesite aplikacijo: Scan the QR code below or search for "AiLink" in the Google Play Store (for Android) or Apple App Store (for iOS). Download and install the application.
2. Registracija/Prijava: Open the AiLink app. You may need to register a new account or log in using an existing account (e.g., Facebook or Apple ID).
3. Priključite Clamp Merilnik: Ensure Bluetooth is enabled on your mobile phone. In the AiLink app, press the "ADD" or "+" button to search for nearby devices. Select the clamp meter from the list to connect.
4. Start Measurement and Analysis: Ko ste povezani, lahko view real-time data, save measurements, and analyze them within the app. The app allows for data export (e.g., CSV files).

Image 7.1: Visual guide demonstrating the steps to download the AiLink app, log in, connect to the clamp meter, and view podatke.

Download AiLink App: https://aicare.net.cn/app/ailink/download/

8. Vzdrževanje

• Čiščenje: Regularly wipe the meter casing z oglasomamp krpo in blag detergent. Ne uporabljajte abrazivov ali topil.
• Zamenjava baterije: Replace the 9V battery when the low battery indicator appears on the display. Always turn off the meter before replacing the battery.
• Shranjevanje: Če merilnika ne uporabljate dlje časa, odstranite baterijo, da preprečite puščanje. Merilnik shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
• Umerjanje: For professional use, periodic calibration by a qualified technician is recommended to ensure continued accuracy.

9. Odpravljanje težav

10. Specifikacije

11. Garancija in podpora

AOPUTTRIVER products are designed for reliability and performance. For warranty information or technical support, please refer to the documentation included with your purchase or contact AOPUTTRIVER customer service directly. If you have questions about the product during daily use, please contact us for assistance.