LEDVANCE 65636

Sylvania 32ft RGB Flexible Light Strip Starter Kit Instruction Manual

Model: 65636 | Brand: LEDVANCE

Pomembne varnostne informacije

  • Samo notranja uporaba: This product is designed for indoor use in dry locations. Do not expose to water or high humidity.
  • Električna varnost: Ensure the power adapter is connected to a suitable power outlet. Do not overload electrical circuits.
  • Navodila za rezanje: The LED strips can be cut for customized length. Only cut along the designated markings to avoid damaging the strip.
  • Namestitev: Pred namestitvijo ali vzdrževanjem vedno odklopite napajanje.
  • Toplota: Do not cover the LED strips with materials that may trap heat, as this can cause overheating.
  • otroci: Izdelek in njegove komponente hranite izven dosega otrok.

Vsebina paketa

Preverite, ali so v paketu prisotne vse komponente:

  • (2) 16.4ft RGB Flexible LED Light Strips
  • (1) Napajanje
  • (1) IR Remote Controller (with battery included)
  • (20) Montažne sponke
Sylvania 32ft RGB Flexible Light Strip Starter Kit components

Image: Main product image showing the light strips, remote, power adapter, and clips.

Nastavitev in namestitev

  1. Pripravite površino: Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the clips.
  2. Povežite komponente: Connect the LED light strips to the controller, ensuring the arrows on the connectors align. Then, connect the power supply to the controller.
  3. Testna funkcionalnost: Before permanent mounting, plug in the power supply and use the remote control to test the light strips. Verify all colors and modes function correctly.
  4. Customize Length (Optional): If a shorter length is desired, only cut the LED strips along the designated cutting marks (usually indicated by a scissor icon or copper pads). Cutting elsewhere will damage the strip.
  5. Mount the Strips: Remove the adhesive outer layer from the back of the mounting clips and press firmly for five seconds when mounting. Use the provided clips to secure the light strips in your desired location, such as under cabinets, behind TVs, or along shelves.
  6. Aktiviraj daljinski upravljalnik: Remove the plastic tab from the remote control's battery door to activate the battery.
Diagram showing connection, cutting points, and mounting of LED strips

Image: Step-by-step diagram illustrating how to connect the light strips, identify cutting points, and mount them using clips.

Delovanje

The Sylvania RGB Flexible Light Strips are controlled using the included IR remote. Ensure the remote is pointed towards the IR receiver on the controller for optimal response.

Funkcije daljinskega upravljalnika:

  • VKLOP/IZKLOP: Power the light strips on or off.
  • Izbira barve: Z barvnimi gumbi izberite med 16 statičnimi barvami.
  • Zatemnitev: Adjust the brightness of the selected color or dynamic mode.
  • Dinamični načini: Select from 4 pre-programmed dynamic modes (e.g., Flash, Strobe, Fade, Smooth) to create different lighting effects.
Diagram of the IR remote control with labeled buttons for colors and modes

Image: Detailed illustration of the IR remote control, highlighting buttons for power, color selection, dimming, and dynamic modes.

Vzdrževanje

  • Čiščenje: Gently wipe the LED strips with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
  • Življenjska doba: The LED technology provides a long operational life of up to 30,000 hours under normal use conditions.
  • Daljinska zamenjava baterije: If the remote control becomes unresponsive, replace the CR2025 lithium coin cell battery.

Odpravljanje težav

TežavaMožen vzrokrešitev
Luči se ne prižgejo.Power connection issue, remote battery dead, IR receiver blocked.Check all connections (power supply, controller, strips). Ensure arrows on connectors align. Replace remote battery. Ensure remote is pointed at the IR receiver without obstruction.
Daljinski upravljalnik se ne odziva.Remote battery dead, remote too far, IR receiver blocked.Replace remote battery. Ensure remote is within range and pointed directly at the IR receiver. Remove any obstructions between the remote and receiver.
Some sections of the light strip are not lighting up.Damaged section, incorrect cutting.Inspect the strip for physical damage. If a section was cut incorrectly, it may be permanently damaged. Ensure connections are secure.

Specifikacije

FunkcijaPodrobnost
Številka modela65636
ZnamkaLEDVANCE (Sylvania)
barvaRGB (16 colors) + White
Dolžina32ft (2 x 16.4ft strips)
UporabaSamo v zaprtih prostorih
Posebne lastnostiSpreminjanje barve, zatemnljivo, energetsko učinkovito
Vrsta svetlobnega viraLED
Vir napajanjaElektrični na kabel
Vrsta krmilnikaIR daljinski upravljalnik
voltage12 volta
Wattage24 vatov
PovezljivostInfrardeči
MaterialPlastika
Teža predmeta10.88 unč
Življenjska dobaDo 30,000 ur
VodoodpornostNi vodoodporen
UPC046135656361

Garancija in podpora

This Sylvania LED Flexible Light Strip Starter Kit is backed by a 1-letna garancija proizvajalca.

For technical support, warranty claims, or additional product information, please visit the official LEDVANCE webali se obrnite na njihov oddelek za pomoč uporabnikom.

Obiščete lahko tudi LEDVANCE Store on Amazon za več izdelkov in informacij.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.