AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Izdelek je končanview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Ključne značilnosti:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Multimedia Access: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Specifikacije

3. Navodila za namestitev

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Razpakiranje

1. Previdno vzemite ohišje računalnika iz embalaže.
2. Remove any protective films or internal packaging materials.
3. Ohišje postavite na stabilno, ravno površino.

3.2 Namestitev matične plošče

1. Odstranite stransko ploščo iz kaljenega stekla tako, da odvijete vijake s palcem.
2. Install the I/O shield (if not pre-installed on your motherboard) into the rear opening of the case.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Matično ploščo pritrdite s priloženimi vijaki.

3.3 Namestitev napajalnika

1. Locate the power supply mounting area at the bottom rear of the case.
2. Slide your power supply unit (PSU) into the designated bay.
3. Napajalnik pritrdite z vijaki na zadnji strani ohišja.

3.4 Namestitev pogona za shranjevanje

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Expansion Card (GPU) Installation

1. Z zadnje strani ohišja odstranite potrebne pokrove razširitvenih rež.
2. Vstavite grafično kartico ali druge razširitvene kartice v reže PCIe na matični plošči.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Hladilni sistem

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Upravljanje kablov

Za organizacijo kablov uporabite izreze za napeljavo kablov in pritrdilne točke za pladnjem matične plošče. To izboljša pretok zraka in estetiko.

4. Navodila za uporabo

4.1 Vklop/izklop

• To power on your PC, press the Moč gumb, ki se nahaja na zgornji plošči.
• To power off, either shut down through your operating system or press and hold the Moč gumb za nekaj sekund.

4.2 Vhodna/izhodna vrata na sprednji plošči

The top panel provides convenient access to various ports:

• Vrata USB 3.0 (x1): Za visokohitrostni prenos podatkov.
• Vrata USB 2.0 (x2): Za priklop perifernih naprav.
• Priključek za mikrofon: Za avdio vhod.
• HD Audio Jack: For audio output (headphones/speakers).
• Gumb za ponastavitev: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Vzdrževanje

Redno vzdrževanje pomaga zagotoviti optimalno delovanje in dolgo življenjsko dobo komponent vašega računalnika.

5.1 Čiščenje filtra za prah

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Generalno čiščenje

• Zunanjost ohišja obrišite z mehko krpoamp krpo. Izogibajte se abrazivnim čistilom.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Odpravljanje težav

If you encounter issues with your PC case, consider the following common troubleshooting steps:

• Brez napajanja: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Ventilatorji se ne vrtijo/RGB ne deluje: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Pregrevanje: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Vrata na sprednji plošči ne delujejo: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Garancija in podpora

7.1 Informacije o garanciji

The AeroCool HEXFORMBKV2 PC case comes with a 2-letna garancija for parts. Please retain your proof of purchase for warranty claims.

7.2 Tehnična podpora

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's webmestu ali v embalaži izdelka.

• Uradnik AeroCoola Webspletno mesto: www.aerocool.io
• E-pošta za podporo strankam: support@aerocool.io (Nprample, please verify on official webspletno mesto)