Pipishell PIXSF2
Pipishell Full Motion TV Wall Mount Instruction Manual
Model: PIXSF2
Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your Pipishell Full Motion TV Wall Mount. Please read this manual thoroughly before installation to ensure safe and correct usage. Keep this manual for future reference.
Image: The Pipishell Full Motion TV Wall Mount, showcasing its articulating arm and VESA plate.
Varnostne informacije
Nepravilna namestitev ali uporaba tega izdelka lahko povzroči resne poškodbe ali škodo. Prosimo, upoštevajte naslednja varnostna navodila:
- Prepričajte se, da površina za montažo lahko varno podpira skupno težo nosilca in televizorja.
- Do not mount on drywall alone. This mount requires installation into a single wood stud, concrete wall, or block wall.
- Use all provided hardware and do not substitute parts.
- Če ste glede katerega koli dela postopka namestitve negotovi, se posvetujte s usposobljenim strokovnjakom.
- Med namestitvijo hranite otroke in hišne ljubljenčke proč.
Image: Illustration showing compatible wall types: concrete wall, single wood stud, and block wall. A warning indicates not to mount on drywall alone.
Vsebina paketa
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Pipishell customer support.
| Komponenta | Količina |
|---|---|
| Sestavljanje stenske plošče | 1 |
| TV nosilec | 1 |
| Pritrdilni material (vijaki, sidra, podložke) | Izbrano |
| Navodila za uporabo | 1 |
Nastavitev in namestitev
Follow these steps carefully for a secure installation:
- Preverite združljivost: Before starting, ensure your TV's VESA pattern (Max: 100x100mm, Min: 75x75mm) and weight (Max: 33 lbs) are compatible with this mount.
- Poiščite položaj montaže: Choose a suitable location on a single wood stud, concrete, or block wall. Use a stud finder to accurately locate the center of the wood stud if applicable.
- Stenska plošča za montažo: Secure the wall plate to the chosen wall type using the appropriate anchor bolts and hardware. Ensure it is level and firmly attached.
- Attach TV Bracket: Fasten the TV bracket to the back of your television using the provided screws that match your TV's VESA pattern.
- Hang Display: Carefully lift the television with the attached bracket and hook it onto the wall plate assembly. Ensure it is securely seated.
Image: Diagram illustrating VESA mounting patterns (100x100mm, 75x75mm) and maximum load capacity of 33 lbs for TV sizes 13-26 inches.
Image: Visual guide showing three steps: 1) Mount Wall Plate, 2) Attach TV Bracket, 3) Hang Display.
Navodila za uporabo
Your Pipishell Full Motion TV Wall Mount offers versatile adjustments for optimal viewing:
- Vrtljiva: The mount allows for a swivel range of up to ±90° (depending on TV size and wall distance) to adjust the horizontal viewvhodni kot.
- Nagib: Adjust the vertical tilt from -15° to +5° to reduce glare and find the perfect viewvhodni kot.
- Extension & Retraction: Extend the TV up to 10.6 inches from the wall for flexible positioning or retract it to a mere 2.9 inches for a low-profile poglej.
- Vrtenje: The VESA plate can rotate 360° allowing for landscape or portrait orientation of your display.
Image: A TV mounted on the wall, illustrating the swivel motion of ±90° and the extension/retraction range of 2.9 to 10.6 inches, along with tilt angles of -15° to +5°.
Image: A diagram showing the TV mount's full motion flexibility, including 360° rotation of the VESA plate.
Vzdrževanje
To ensure the longevity and proper function of your TV wall mount:
- Redno preverjajte vse vijake in povezave, da se prepričate, da so trdno priviti in varno pritrjeni.
- Nosilec očistite z mehko, suho krpo. Izogibajte se abrazivnim čistilom ali topilom.
- Do not hang anything from the mount other than the intended television.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Nosilec se po namestitvi zdi nestabilen. | Loose mounting screws or incorrect wall anchors. | Re-check all wall plate screws and ensure they are tightened into a solid stud or appropriate anchors. Refer to installation steps. |
| Difficulty adjusting swivel/tilt. | Joints may be too tight or need lubrication. | Apply a small amount of silicone-based lubricant to the moving joints. Do not over-tighten joint bolts. |
| TV not level. | Wall plate installed unevenly. | Adjust the leveling screws on the VESA plate if available, or re-install the wall plate ensuring it is perfectly level. |
Specifikacije
- Model: PIXSF2
- Znamka: Pipishell
- Material: Legirano jeklo
- barva: Črna
- Združljive velikosti televizorjev: 13-26 palcev
- Največja nosilnost: 33 lbs (15 kg)
- Združljivost z VESA: 75x75 mm, 100x100 mm
- Vrsta gibanja: Swivel, Rotate, Tilt, Full Motion, Articulating
- Kot nagiba: -15° do +5°
- Kot vrtenja: ±90° (največ, odvisno od velikosti televizorja)
- Podaljšek iz stene: 2.9 palca (zloženo) do 10.6 palca (izvlečeno)
- Dimenzije izdelka: 38.98 x 12.6 x 5.12 inches (mount only)
- Teža artikla: 1.39 funtov
Garancija in podpora
Pipishell products are designed for durability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Pipishell webmesto.
For technical support, installation assistance, or any questions regarding your product, please contact Pipishell customer service:
- E-pošta: support@pipishell.com
- Webspletno mesto: www.pipishell.com
You can also find additional resources and FAQs on our webmesto.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.