Uvod
This manual provides essential information for the safe and proper installation, operation, and maintenance of your Hüppe Alpha 2 Side Panel Walk-In Shower Enclosure. Please read all instructions carefully before beginning installation or use. Retain this manual for future reference.
Konec izdelkaview
The Hüppe Alpha 2 Side Panel is a high-quality, fully framed walk-in shower enclosure designed for modern bathrooms. It features durable construction and flexible installation options.
Ključne značilnosti:
- Single side panel, fully framed design.
- Suitable for free-standing, floor-level installation.
- Constructed with high-quality anodized aluminum profiles.
- Compatible with both shower trays and tiled floors.
- Designed without an external handle.
- Allows for right or left-hand mounting.
- Supplied partially assembled for easier installation.
- Available with 2 mm Pacific S artistic glass or 4 mm tempered safety glass (DIN EN 12150).
- Optional Hüppe Anti-Plaque surface finish for tempered safety glass, facilitating easier cleaning.
Slika 1: Splošno view of the Hüppe Alpha 2 Side Panel installed as part of a walk-in shower enclosure.
Varnostna navodila
- Med namestitvijo vedno nosite ustrezno osebno zaščitno opremo (OZO), vključno z zaščitnimi očali in rokavicami.
- Ensure the installation area is clean, dry, and well-lit.
- Handle glass panels with extreme care to prevent breakage and injury. Tempered glass, while strong, can shatter into small pieces if damaged at the edges.
- Verify that the wall structure can support the weight of the shower enclosure.
- Do not use power tools near water or in damp conditions without proper safety precautions.
- Otroke in hišne ljubljenčke držite stran od območja namestitve.
- Pred uporabo se prepričajte, da so vsi pritrdilni elementi trdno pritrjeni.
- Do not hang or apply excessive force to the shower panel once installed.
Nastavitev in namestitev
The Hüppe Alpha 2 Side Panel is supplied partially assembled. Detailed assembly instructions and fixing materials are included with your delivery. It is highly recommended to consult a professional for measurement and installation to ensure optimal fit and performance.
Opombe pred namestitvijo:
- Unpack all components carefully and check against the packing list for completeness and any damage.
- Ensure the shower area dimensions are accurate. Note that the stated dimensions for the shower enclosure primarily refer to installation on shower trays.
- For floor-level installation, specific dimensions may differ. It is crucial to confirm the exact size of your shower area before proceeding with installation.
- Prepare the installation site by ensuring the floor and walls are level, clean, and structurally sound.
General Installation Steps (Refer to included manual for specifics):
- Pozicioniranje: Determine the desired orientation (right or left mounting) for the side panel.
- Profile Namestitev: Zavarujte steno profiles to the prepared wall using the provided fixing materials. Ensure they are plumb and level.
- Postavitev plošče: Carefully insert the glass panel into the profiles.
- Varovanje: Secure the panel within the profiles according to the specific instructions.
- Tesnjenje: Apply appropriate silicone sealant to all joints and edges to ensure a watertight seal. Allow adequate curing time before use.
- Končna preverjanja: Verify the stability of the installed panel and check for any gaps or potential leak points.
Slika 2: Nprample od profesionalcafile and glass panel detail, illustrating the components involved in installation.
Navodila za uporabo
The Hüppe Alpha 2 Side Panel is a fixed component of your shower enclosure and does not require active operation. Its function is to contain water within the shower area. Ensure that the panel is not subjected to excessive force or impact during use.
Vzdrževanje
Regular cleaning and maintenance will preserve the appearance and longevity of your shower enclosure.
Čiščenje:
- Clean glass surfaces regularly with a soft cloth and a mild, non-abrasive glass cleaner.
- For panels with the optional Hüppe Anti-Plaque finish, cleaning is even easier. Simply wipe down with a soft cloth after each use to minimize water spots and limescale buildup.
- Čisti aluminijasti strokovnjakfiles z mehko, damp krpo. Izogibajte se abrazivnim čistilom ali grobim gobicam, ki lahko poškodujejo površino.
- Do not use harsh chemicals, solvents, or acidic cleaners, as these can damage the glass, profiles, or seals.
- Rinse thoroughly with clean water after cleaning to remove any cleaner residue.
Splošna nega:
- Inspect seals and silicone joints periodically for signs of wear or damage. Replace if necessary to maintain watertightness.
- Ensure proper ventilation in the bathroom to reduce humidity and prevent mold growth.
Odpravljanje težav
Ta razdelek obravnava pogoste težave, s katerimi se lahko srečate pri uporabi tuš kabine.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Water leakage from the enclosure base. | Damaged or improperly applied silicone sealant; worn seals. | Inspect all sealed joints. Reapply silicone sealant where necessary. Replace worn seals. Ensure the shower tray or tiled floor is properly sloped towards the drain. |
| Water spots or limescale buildup on glass. | Hard water deposits; infrequent cleaning. | Clean regularly with a mild glass cleaner. For persistent spots, use a specialized limescale remover designed for glass, following product instructions. Consider using a squeegee after each shower. |
| Panel feels loose or wobbly. | Fixing screws are loose; improper installation. | Carefully check and tighten all visible fixing screws. If the issue persists, professional re-installation may be required. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Hüppe customer support or a qualified professional.
Specifikacije
| Atribut | Podrobnost |
|---|---|
| Znamka | Hüppe |
| Številka modela | AL1352087264 |
| Mere izdelka (D x Š x V) | 212 x 104 x 8 cm |
| Teža | 16.5 kilograma |
| barva | Profile Color Matte Silver Artistic Glass Pacific S Clear |
| Višina | 1900 mm |
| Standard Adjustment Range | 40 mm |
| Standard Tray Installation Dimensions | 870-910 mm |
| Možnosti stekla | 2 mm Pacific S artistic glass or 4 mm tempered safety glass (DIN EN 12150) |
| Surface Finish Option | Hüppe Anti-Plaque (for tempered safety glass only) |
| Vključene komponente | Side panel, fixing material, assembly instructions |
| ASIN | B09GXTDC3T |
Garancija in podpora
For information regarding product warranty, please refer to the documentation provided with your purchase or contact Hüppe customer service directly. The product is typically eligible for returns within 30 days of purchase, subject to the seller's return policy.
For technical support, spare parts, or further assistance, please contact the manufacturer:
Hüppe GmbH
www.hueppe.com
Please have your model number (AL1352087264) and purchase details ready when contacting support.