LEDVANCE Linear LED Shelf Light 400mm

1. Uvod

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Linear LED Shelf Light. This versatile lighting solution is designed for various indoor applications, including kitchens, workspaces, and bathrooms (IP44 rated areas). It features a sleek design, uniform light distribution, and a long operational lifespan.

Pred namestitvijo natančno preberite ta priročnik in ga shranite za poznejšo uporabo.

2. Varnostna navodila

• Električna varnost: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or repair.
• Namen uporabe: This product is designed for indoor lighting only. Do not use it in outdoor environments or areas not specified in the product description.
• IP44 ocena: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. This makes it suitable for use in bathrooms (Zone 2 and 3) and kitchens, but it is not submersible.
• Vir svetlobe: This product contains a non-replaceable LED light source of energy efficiency class E. Do not attempt to replace the LED module yourself.
• Ravnanje: Avoid direct contact with the light source when the fixture is powered on, as it may be hot. Do not cover the fixture with insulating material.
• Čiščenje: Only clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Vsebina paketa

Pred začetkom namestitve preverite, ali so prisotne vse komponente:

• 1 x LEDVANCE Linear LED Shelf Light (400mm)
• Complete mounting accessories (screws, wall plugs)
• Priključni pribor

4. Specifikacije

Opomba: Specifikacije se lahko spremenijo brez predhodnega obvestila.

5. Nastavitev in namestitev

The LEDVANCE Linear LED Shelf Light is designed for easy and quick wall mounting. Follow these steps carefully:

1. Pripravite območje namestitve: Choose a suitable location for mounting, ensuring it is a dry, stable surface. For bathroom installations, ensure compliance with local wiring regulations for IP44 rated fixtures.
2. Odklop napajanja: Before starting any electrical work, turn off the power supply at the main circuit breaker to prevent electric shock.
3. Označite vrtalne točke: Hold the fixture against the wall at the desired mounting position. Use a pencil to mark the locations for drilling holes for the mounting brackets. Refer to the product dimensions for accurate placement.

4. Vrtanje lukenj: Na označenih mestih izvrtajte luknje z ustreznim svedrom za material vaše stene. V izvrtane luknje vstavite priložene zidne vložke.
5. Pritrdite pritrdilne nosilce: Nosilce pritrdite na steno s priloženimi vijaki. Prepričajte se, da so trdno pritrjeni.
6. Električna povezava: Connect the fixture's electrical wires to your household wiring. Follow the wiring diagram provided with the product. Ensure all connections are secure and insulated. This fixture is designed for AC power.
7. Namestite napeljavo: Carefully attach the LED shelf light to the installed mounting brackets. Ensure it clicks securely into place.
8. Obnovi moč: Once the fixture is securely mounted and wired, restore power at the main circuit breaker.

6. Navodila za uporabo

This LED shelf light is equipped with an integrated PIR motion detector and a daylight sensor for automatic operation.

• Samodejno delovanje: The light will automatically turn on when motion is detected within its range and ambient light levels are below a certain threshold (daylight sensor).
• Samodejno izklop: The light will automatically turn off after a period of no motion detection, or when sufficient ambient light is present.
• Namestitev senzorja: Ensure the motion sensor is not obstructed to allow for optimal detection. Avoid placing the fixture near heat sources or in direct sunlight, which could interfere with sensor performance.

7. Vzdrževanje

The LEDVANCE Linear LED Shelf Light requires minimal maintenance.

• Čiščenje: To clean the fixture, ensure the power is off. Wipe the surface with a soft, dry, or slightly damp krpo. Ne uporabljajte agresivnih kemikalij, abrazivnih čistil ali razpršil neposredno na svetilki.
• Pregled: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified technician.
• Vir svetlobe: The LED light source is integrated and not user-replaceable. If the light source fails, the entire fixture must be replaced.

8. Odpravljanje težav

If you encounter issues with your LEDVANCE Linear LED Shelf Light, refer to the following common problems and solutions:

• Luč se ne prižge:
  • Preverite, ali je napajanje priključeno in ali je odklopnik vklopljen.
  • Ensure the wiring connections are secure.
  • Verify that the ambient light is low enough for the daylight sensor to activate the light.
  • Check if motion is being detected by the PIR sensor.
• Lučka sveti neprekinjeno:
  • Prepričajte se, da v območju zaznavanja senzorja ni neprekinjenega gibanja.
  • Check if the daylight sensor is being obstructed or if it's in a consistently dark area.
• Light Flashes or Flickers:
  • Disconnect power and check all electrical connections for looseness or damage.
  • Zagotovite voltage supply is stable and within the specified range (240V).

Če ti koraki ne odpravijo težave, se obrnite na podporo strankam.

9. Garancija in podpora

This LEDVANCE Linear LED Shelf Light comes with a 2-letna garancija od datuma nakupa, ki krije napake v materialu in izdelavi pri normalni uporabi.

For warranty claims, technical support, or further assistance, please contact LEDVANCE customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number ready.