Oria Double Pure Water Treatment Station with Bypass - User Manual

1. Uvod

The Oria Double Pure Water Treatment Station is designed to provide comprehensive water purification for your home. This system effectively combines anti-limescale treatment with anti-impurity filtration, ensuring high-quality water for various domestic uses. It is 100% compatible with drinking water, with all components holding ACS (Attestation de Conformité Sanitaire) certification, guaranteeing water quality.

Glavne lastnosti vključujejo:

• Dual Action Filtration: Combines a polyphosphate cartridge for anti-limescale treatment and a wound cartridge for 25-micron anti-impurity filtration.
• Integrated Bypass: Allows for continuous water supply during cartridge replacement, enhancing convenience.
• Enostavna namestitev: Equipped with swivel nut fittings (20x27 - 3/4 inch female) for straightforward setup.
• Long-lasting Cartridges: Designed for a 12-month lifespan for a household of 4 people.
• Celoten komplet: Includes a tightening/loosening wrench for the filter bowls.

Image 1.1: The Oria Double Pure Water Treatment Station with bypass connections.

2. Varnostne informacije

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in property damage or injury.

• Preden začnete z namestitvijo ali vzdrževanjem, se prepričajte, da je glavni dovod vode izklopljen.
• Depressurize the system before opening filter housings.
• Use appropriate tools and follow plumbing best practices.
• Do not exceed the maximum operating pressure of 3 bars.
• Izdelek hranite izven dosega otrok.
• Rabljene kartuše zavrzite v skladu z lokalnimi predpisi.

Image 2.1: ACS (Attestation de Conformité Sanitaire) certification logo, ensuring drinking water compatibility.

3. Vsebina paketa

Preden nadaljujete z namestitvijo, preverite, ali so vse komponente prisotne in nepoškodovane.

• Main filtration system with two filter housings
• Bypass assembly with valves and flexible hose
• Swivel nut fittings (20x27 - 3/4 inch female)
• Polyphosphate anti-limescale cartridge (1)
• 25-micron wound anti-impurity cartridge (1)
• Tightening/loosening wrench for filter bowls
• Montažni nosilec
• Sealing gaskets and Teflon tape

Slika 3.1: Konecview of all included components for the Oria Double Pure system.

Image 3.2: The two types of filter cartridges: polyphosphate (right) and wound (left).

4. Nastavitev in namestitev

This section provides step-by-step instructions for installing your Oria Double Pure Water Treatment Station. It is recommended to install the system under a sink or at the main water inlet.

1. Izberite lokacijo: Select a suitable location, typically under the sink, ensuring easy access for maintenance and sufficient space for the unit (dimensions: 43L x 9.5W x 34H cm).
2. Izklopite dovod vode: Locate your main water shut-off valve and turn off the water supply to your home. Open a faucet to relieve pressure in the pipes.
3. Namestite nosilec: Securely mount the provided bracket to a sturdy surface using appropriate screws and anchors. Ensure it is level.
4. Connect Bypass Assembly: Attach the bypass assembly, including the flexible hose and valves, to the main filtration unit. Use Teflon tape on threaded connections to prevent leaks. The bypass allows water to flow around the filters when they are being changed.
5. Namestitev kartuš:
   • Unscrew the filter bowls using the provided wrench.
   • Insert the 25-micron wound cartridge into the first housing (inlet side).
   • Insert the polyphosphate anti-limescale cartridge into the second housing (outlet side).
   • Ensure the cartridges are seated correctly and screw the bowls back on hand-tight, then use the wrench for a final snug turn (do not overtighten).
6. Priključitev na vodovodno cev: Connect the inlet of the bypass assembly to your cold water supply line and the outlet to your faucet or desired water line using the swivel nut fittings. Ensure all connections are tight and leak-free.
7. Izpiranje sistema: Slowly turn on the main water supply. Open a filtered water faucet to allow air to escape and flush the system for 5-10 minutes until the water runs clear. Check for any leaks.

Image 4.1: Dimensional drawing of the Oria Double Pure system for installation planning.

Slika 4.2: Podrobno view of the bypass connection and valves.

5. Navodila za uporabo

Once installed, the Oria Double Pure system operates automatically. Water flows through the filters, providing treated water to your tap.

• Normalno delovanje: Ensure all bypass valves are set to allow water flow through both filter housings.
• Using the Bypass: In case of maintenance (e.g., cartridge replacement) or if you need to temporarily bypass the filtration system, close the inlet and outlet valves to the filter housings and open the bypass valve. This will allow untreated water to flow directly to your tap. Remember to revert the valves to normal operation after maintenance.

6. Vzdrževanje

Regular maintenance, primarily cartridge replacement, is essential to ensure optimal performance of your Oria Double Pure system.

6.1. Zamenjava kartuše

Cartridges should be replaced every 12 months for a household of 4 people, or sooner if you notice a decrease in water flow or quality.

1. Activate Bypass: Close the inlet and outlet valves to the filter housings and open the bypass valve to maintain water supply to your home.
2. Zmanjšajte tlak: Open a filtered water faucet to release any remaining pressure in the system.
3. Unscrew Filter Bowls: Place a bucket underneath the filter housings to catch any residual water. Use the provided wrench to carefully unscrew the filter bowls.
4. Odstranite stare kartuše: Discard the used wound and polyphosphate cartridges.
5. Čista ohišja: Clean the inside of the filter bowls with warm, soapy water. Rinse thoroughly. Inspect and lubricate the O-rings if necessary, or replace them if damaged.
6. Namestite nove kartuše: Insert new 25-micron wound and polyphosphate cartridges into their respective housings. Ensure they are properly seated.
7. Ponovno sestavite: Screw the filter bowls back onto the system hand-tight, then use the wrench for a final snug turn. Do not overtighten.
8. Return to Normal Operation: Close the bypass valve and slowly open the inlet and outlet valves to the filter housings.
9. Sistem za izpiranje: Open a filtered water faucet and flush the system for 5-10 minutes to remove any air and fine particles from the new cartridges. Check for leaks.

Image 6.1: Using the provided wrench to open a filter housing for cartridge replacement.

Image 6.2: Inserting a new filter cartridge into the housing.

Image 6.3: Tightening the filter housing after cartridge replacement.

7. Odpravljanje težav

This section addresses common issues you might encounter with your water treatment station.

If you experience persistent issues not covered here, please contact Oria customer support.

8. Specifikacije

9. Garancija in podpora

Oria products are designed for reliability and performance. For specific warranty details, please refer to the documentation included with your purchase or visit the official Oria webmesto.

Podpora strankam: If you have any questions regarding installation, operation, maintenance, or troubleshooting that are not covered in this manual, please contact Oria customer support. Contact information can typically be found on the product packaging or the Oria brand store on Amazon.

Nadomestni deli: Replacement cartridges and other spare parts are available for 12 months from the date of purchase. Ensure you use genuine Oria replacement parts to maintain product performance and warranty validity.

You can visit the Oria brand store for more information: Oria Brand Store