1. Uvod
Thank you for choosing the WOBANE Under Cabinet LED Lighting Kit. This kit is designed to provide efficient and customizable lighting for various indoor applications, including under counters, cupboards, shelves, showcases, desks, beds, and wardrobes. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your product.
2. Vsebina paketa
The WOBANE Under Cabinet LED Lighting Kit includes the following components:
- 8 x 20-inch LED Strip Light Bars (pre-cut, total 13 ft)
- 1 x 24W Power Adapter (DC12V)
- 1 x RF Wireless Remote Control (17-Key)
- 1 x RF Receiver/Controller
- 2 x 20-inch Straight Connectors
- 4 x 6.7-inch Straight Connectors
- Adhesive mounting clips and double-sided tape
3. Nastavitev in namestitev
Follow these steps for proper installation of your LED lighting kit:
- Priprava površine: Ensure the installation surface is clean, dry, and smooth. Wipe the area with a clean cloth to remove any dust or debris.
- Postavitev načrta: Determine the desired layout for your LED strips. The kit includes 8 pre-cut 20-inch strips. You can connect them in a single line (total 13 ft) or in multiple lines. Use the included straight connectors to bridge gaps or connect strips in different configurations.
- Povežite trakove: Connect the LED strips using the provided connectors. For corners or angles, the flexible strips can be gently bent, or you can use the included straight connectors to bridge gaps between cabinets.
- Mount Strips: Each LED strip has a self-adhesive backing. Peel off the protective paper from the adhesive and firmly press the strip onto the prepared surface. Use the included cable holders to secure any loose wires for a neat installation.
- Priključite napajanje: Plug the RF receiver/controller into the power adapter, and then plug the power adapter into a standard electrical outlet. Connect the LED strips to the RF receiver/controller.
4. Navodila za uporabo
The 17-Key RF wireless remote control allows for convenient operation of your WOBANE LED lights.
- Vklop/izklop: Pritisnite ON or IZKLOP buttons to turn the lights on or off.
- Prilagoditev svetlosti: Use the up/down arrow buttons to gradually increase or decrease brightness. Quick selection buttons for 100%, 75%, 50%, and 25% brightness are also available.
- Dinamične funkcije: The remote includes buttons for various dynamic lighting effects, such as pulsing or flashing.
- Nočni način: Select the moon icon button for a dimmed night mode setting.
- Funkcija časovnika: Set the lights to automatically turn off after a specified duration using the timer buttons (3, 5, 15, 30, 60 minutes). Press the 'C' button to clear any active timer.
- Remote Re-match: If you have multiple WOBANE kits or need to re-pair a remote, follow the re-match instructions provided in the detailed user manual. This allows one remote to control multiple light kits simultaneously.
5. Customization & Configuration
The WOBANE LED Lighting Kit offers flexibility for various installations:
- Connecting Options: Utilize the provided 20-inch and 6.7-inch straight connectors to extend the reach of your lighting or to bridge gaps between cabinets, such as over microwaves or windows.
- Cutting Strips: The LED strips are designed to be cuttable every 3 LEDs. Locate the designated cut marks on the strip to customize the length as needed. Ensure to cut only at these marked points to avoid damaging the circuit.
6. Vzdrževanje
To ensure optimal performance and longevity of your LED lights:
- Keep the LED strips clean and free from dust. Wipe gently with a dry, soft cloth.
- Avoid exposing the strips to excessive moisture or direct water, as they are designed for indoor use only.
- Regularly check connections to ensure they are secure.
7. Odpravljanje težav
If you encounter issues with your LED lighting kit, refer to the following common solutions:
- Luči se ne prižigajo: Ensure the power adapter is securely plugged into a working outlet and the LED strips are correctly connected to the RF receiver/controller. Check the remote control battery.
- Daljinec se ne odziva: Verify the remote control battery. Ensure the RF receiver is not obstructed and is within the 60-foot control distance. Try the remote re-match procedure if controlling multiple kits.
- Neskladna svetlost: Check all connections for loose contacts. Ensure the power adapter is functioning correctly.
8. Specifikacije
| Znamka | WOBANE |
| Številka modela | LED cabinet light CS8 |
| Vrsta svetlobnega vira | LED |
| Svetla barva | Bela |
| Barvna temperatura | 6000 Kelvinov |
| Svetlobni tok | 1900 lumnov |
| Wattage | 24 Watts (also listed as 20 Watts) |
| voltage | DC12V (Power Adapter Input: 100-240V) |
| Število svetlobnih virov | 240 |
| CRI | 82.00 |
| Vrsta krmilnika | RF daljinski upravljalnik |
| Nadzorna metoda | Daljinsko |
| Item Length (each strip) | 20 palcev |
| Notranja/zunanja uporaba | Notranja |
| Baterije priložene | 1 Lithium Polymer (for remote) |
9. Varnostne informacije
Upoštevajte naslednje varnostne ukrepe:
- Ta izdelek je namenjen samo za uporabo v zaprtih prostorih. Ne izpostavljajte ga vodi ali visoki vlažnosti.
- Ensure the power adapter is connected to a suitable power source (100-240V AC).
- Izdelka ne poskušajte popravljati ali spreminjati. Za pomoč se obrnite na podporo strankam.
- Hraniti izven dosega otrok.
- Avoid prolonged direct eye exposure to the LED light.
10. Uradni videoposnetek izdelka
11. Garancija in podpora
For warranty information, technical support, or any inquiries regarding your WOBANE Under Cabinet LED Lighting Kit, please contact WOBANE customer service through the retailer where the product was purchased or visit the official WOBANE store online.
WOBANE Store: Visit the WOBANE Store