ONVIAN Smart Bike Light with Turn Signals, Horn, and Alarm

Uvod

The ONVIAN Smart Bike Light is a multi-functional device designed to enhance cycling safety and security. It integrates a rear light with turn signals, a horn, a brake light, and an anti-theft alarm system. This manual provides detailed instructions for the proper installation, operation, and maintenance of your device.

Vsebina paketa

Prosimo, preverite, ali so v paketu prisotni vsi elementi:

• Bike Alarm Tail Light
• Brezžični daljinski upravljalnik
• USB polnilni kabel
• Montažni nosilec in dodatki
• Uporabniški priročnik (ta dokument)

Lastnosti izdelka

The ONVIAN Smart Bike Light offers several key features:

• Funkcionalnost 5 v 1: Combines turn signals, warning light, brake light, electric bell, and anti-theft alarm.
• Ultra-Bright Taillight: 31 COB LEDs provide 160 lumens with a 200-degree wide-angle for enhanced visibility.
• Več načinov osvetlitve: Six modes available: Slow Flashing, Breathing, Fast Blinking, Steady Light, Emergency Light, and OFF.
• Directional Turn Signals: Wireless remote control activates left/right turn signals.
• Integrated Electric Bell: Features three distinct sounds: Electric Car Sound, Horn Sound, and Birdcall Sound.
• 110 dB Anti-theft Alarm: Deters theft with a loud alarm sound and adjustable sensitivity (1-7 levels).
• Vodotesna ocena IP54: Zagotavlja zanesljivo delovanje v različnih vremenskih razmerah.
• USB-C za polnjenje: Built-in 2000mAh battery provides up to 70 hours of use on a 7-hour full charge.
• Pametno zaznavanje zavor: Automatically highlights the brake light for 2 seconds upon braking (except in Emergency Light Mode).
• Intelligent Auto On/Off: In "Slowing Flashing" and "Breathing" modes, the light adjusts based on ambient brightness and vibration.

Slika: Konecview of the ONVIAN Smart Bike Light's multi-functional capabilities, including turn signals, brake sensor, alarm, remote control, and electric bell, compared to basic taillights.

Nastavitev in namestitev

1. Polnjenje naprave

Before first use, fully charge the bike light. Connect the provided USB charging cable to the USB-C port on the light and to a standard USB charger (5V/1A recommended). A full charge takes approximately 7 hours and provides up to 70 hours of operation depending on the mode used.

Pomembno: Use only the original USB cable for charging. The device does not support fast charging. Using a fast-charging cable or adapter may damage the battery.

Image: Illustration of the bike light's 2000mAh battery capacity and USB-C charging method, showing connection to a wall adapter.

2. Namestitev zadnje luči

The tail light is designed for seatpost mounting. Use the provided bracket and accessories to securely attach the light to your bicycle's seatpost. Ensure the light is facing directly backward and is not obstructed.

The mounting bracket includes spare rubber collars to accommodate various seatpost diameters. Adjust as necessary for a snug fit.

Image: The ONVIAN Smart Bike Light mounted on a bicycle seatpost, demonstrating its rear position and visibility.

3. Attaching the Wireless Remote Control

Attach the wireless remote control to your bicycle's handlebar. The clamp is designed to fit handlebars with a diameter between 0.78-0.94 inches (20-24mm). Position it within easy reach for safe operation while riding.

Image: The wireless remote control mounted on a bicycle handlebar, illustrating its accessible placement for controlling the bike light's functions.

Navodila za uporabo

1. Vklop/izklop

Press the main power button on the tail light unit to turn it on or off. The light will typically start in the last used mode.

2. Changing Light Modes

Use the remote control to cycle through the six available lighting modes:

• Počasno utripanje
• Dihanje
• Hitro utripanje
• Stalna svetloba
• Zasilna luč
• IZKLOP

Image: Visual representation of the six distinct light modes, including red taillight options and yellow emergency/off states.

3. Using Turn Signals

Press the left or right arrow button on the wireless remote control to activate the corresponding turn signal. The signal will flash to indicate your turning intention to other road users. Press the button again to deactivate.

4. Activating the Electric Bell (Horn)

The remote control includes a button to activate the electric bell. There are three distinct horn sounds: Electric Car Sound, Horn Sound, and Birdcall Sound. Cycle through these sounds by pressing the horn button repeatedly.

Pozor: Avoid using the horn in enclosed spaces as its 110dB volume can be very loud.

5. Anti-theft Alarm Function

To arm the anti-theft alarm, press the alarm button on the remote control. The light will beep to confirm the alarm is set. Any significant vibration or movement of the bike will trigger a loud 110dB alarm sound to deter potential thieves. To disarm, press the disarm button on the remote.

Image: The anti-theft bike alarm in action, illustrating its 110dB sound to deter theft.

6. Smart Brake Sensing

The tail light features a smart brake sensor. When you brake or slow down, the light will automatically illuminate brighter for 2 seconds to alert vehicles and pedestrians behind you. This feature is active in all modes except "Emergency Light Mode."

Image: A cyclist demonstrating the intelligent induction brake feature, where the light brightens upon braking.

7. Intelligent Auto On/Off

In "Slowing Flashing" and "Breathing" modes, the light operates intelligently:

• It will light up for 30 seconds upon activation.
• It detects ambient brightness, automatically turning off in bright conditions and on in dark conditions.
• If stationary for more than 30 seconds in a dark environment, it will turn off to conserve power and reactivate upon detecting vibration.

Vzdrževanje

1. Polnjenje

Recharge the device when the battery indicator shows low power. Always use the provided USB-C cable and a standard 5V/1A charger. Avoid fast chargers.

2. Čiščenje

Wipe the light and remote control with a soft, damp krpo. Ne uporabljajte abrazivnih čistil ali topil.

3. Vodoodpornost

The device has an IP54 waterproof rating, meaning it is protected against dust and splashing water from any direction. While it can withstand rain, avoid submerging it in water or exposing it to heavy, prolonged downpours to prevent potential damage.

Image: The durable PC + UV resistant material of the bike light, highlighting its resilience against various weather conditions like rain, snow, and sun.

4. Zamenjava baterije daljinskega upravljalnika

The remote control is equipped with a replaceable CR2032 coin cell battery. When the remote's range decreases or it stops responding, replace the battery. Refer to the remote control's specific instructions for battery access.

Odpravljanje težav

1. Alarm is too sensitive or not sensitive enough

The alarm's vibration sensitivity can be adjusted (levels 1-7).

1. Ensure the tail light is in RAZARJEMO način.
2. Press and hold the light mode button (lower light button) on the remote until the remote indicator light turns off and then lights up again, and the alarm taillight emits a beep.
3. Pritisnite [left/right] button on the remote to select the desired vibration sensitivity level (1-7).
4. Press the light mode button (lower light button) again to exit the setting mode.

2. Light not charging or holding charge

• Ensure you are using the original USB-C cable.
• Verify that your charger is a standard 5V/1A adapter and not a fast charger.
• Preverite, ali so na polnilnem priključku umazanija ali poškodbe.

3. Remote control not responding

• Check and replace the CR2032 coin cell battery in the remote control.
• Ensure the remote is within the effective wireless range (up to 60m).

Specifikacije

Garancija in podpora

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Onvian customer service through their official channels. Specific warranty terms may vary by region and retailer.