Uporabniški priročnik za orodje za ponovno učenje XTOOL TP150 TPMS

1. Uvod

The XTOOL TP150 is a professional Tire Pressure Monitoring System (TPMS) tool designed for comprehensive TPMS service. It supports activation, relearning, programming of XTOOL sensors, and diagnostic functions for TPMS systems. This manual provides detailed instructions for the proper use and maintenance of your TP150 device.

2. Varnostne informacije

Always observe the following safety precautions when operating the TP150 tool:

• Pred uporabo natančno preberite vsa navodila.
• Do not operate the tool in wet conditions or near flammable liquids/gases.
• Ensure the vehicle's ignition is off before connecting or disconnecting the OBDII cable.
• Use only the accessories and parts specified by XTOOL.
• Orodje hranite izven dosega otrok.
• Properly dispose of old TPMS sensors and batteries according to local regulations.

3. Izdelek je končanview

The XTOOL TP150 TPMS tool is a handheld device equipped with a user-friendly interface. It comes with two 315/433MHz dual-frequency sensors for programming.

Image: The XTOOL TP150 device, two XTOOL TPMS sensors, and their protective yellow carrying case.

3.1. Ključne značilnosti

• Aktivacija TPMS: Activates all known OE and aftermarket TPMS sensors.
• Ponovno učenje TPMS: Supports OBD Relearn and Static Relearn for all sensors.
• Programiranje TPMS-a: Programs XTOOL 315/433MHz sensors with four methods: Automatic ID Generation, Manual ID Entry, Copy ID by Activating, and Read ECU Copy ID.
• Diagnoza TPMS-a: Reads and clears TPMS Diagnostic Trouble Codes (DTCs), resets TPMS warning light.
• Prikaz podatkov v realnem času: Shows sensor ID, tire pressure, temperature, and sensor voltage.
• OE Sensor Information Check: Displays brand, part number, and frequency of OE sensors.

4. Nastavitev

4.1. Začetna nastavitev naprave

1. Razpakiraj: Carefully remove the TP150 tool and accessories from the packaging.
2. Vklop: Pritisnite gumb za vklop, da vklopite napravo.
3. Posodobitev programske opreme: It is highly recommended to update the device software to the latest version before first use. Connect the device to a computer with internet access and follow the update instructions provided on the XTOOL official website or through the device's update menu. (Note: Some functionalities may not work correctly without the latest software.)

4.2. Povezava z vozilom

1. Poiščite priključek OBDII vozila, običajno pod armaturno ploščo na voznikovi strani.
2. Prepričajte se, da je kontakt vozila v položaju IZKLOP.
3. Connect the OBDII cable from the TP150 tool to the vehicle's OBDII port.
4. Turn the vehicle's ignition to the ON position (engine off). The TP150 will power on automatically via the OBDII connection.

5. Navodila za uporabo

The TP150 offers various functions accessible from the main menu. Navigate using the directional buttons and confirm selections with the OK button.

5.1. Activating TPMS Sensors

1. V glavnem meniju izberite "TPMS" or "Activate".
2. Izberite znamko, model in letnik vozila.
3. Izberite "Activate Sensor".
4. Hold the TP150 tool near each tire's valve stem and press the activation button.
5. The tool will display sensor information (ID, pressure, temperature, voltage) upon successful activation.

5.2. Postopki ponovnega učenja sistema TPMS

Relearning is required when new sensors are installed, tires are rotated, or the ECU is replaced.

1. V glavnem meniju izberite "TPMS", potem "Relearn".
2. Select the vehicle make, model, and year.
3. Choose the appropriate relearn method:
• Ponovno učenje OBD: Connect the TP150 to the vehicle's OBDII port. Follow on-screen instructions to transfer new sensor IDs to the vehicle's ECU.
• Static Relearn: Follow the specific vehicle manufacturer's procedure, often involving a sequence of actions (e.g., turning ignition on/off, pressing brake pedal). The TP150 will guide you through the process.
4. Confirm successful relearn on the device screen and check the vehicle's dashboard for the TPMS warning light status.

5.3. Programming XTOOL Sensors

The TP150 can program XTOOL 315/433MHz sensors only. This is useful for replacing faulty sensors.

1. V glavnem meniju izberite "TPMS", potem "Program Sensor".
2. Place the XTOOL sensor to be programmed near the TP150's antenna.
3. Choose one of the following programming methods:
• Automatic ID Generation: The tool generates a new, unique sensor ID.
• Enter ID Manually: Input a specific sensor ID if known.
• Copy ID by Activating: Activate an existing sensor to copy its ID to the new XTOOL sensor.
• Read ECU Copy ID: Read sensor IDs directly from the vehicle's ECU via the OBDII port and copy them to new XTOOL sensors.
4. Follow the on-screen prompts to complete the programming.

5.4. Diagnosing TPMS System

1. Connect the TP150 to the vehicle's OBDII port.
2. V glavnem meniju izberite "TPMS", potem "Diagnose".
3. The tool will scan the TPMS system for Diagnostic Trouble Codes (DTCs).
4. Review the displayed DTCs to identify system faults.
5. After repairs, select "Počisti kode diagnostičnih napak" to erase the codes and reset the TPMS warning light.

6. Vzdrževanje

• Čiščenje: Napravo obrišite z mehko damp krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Shranjevanje: Store the TP150 in its protective case in a dry, cool environment when not in use.
• Posodobitve programske opreme: Regularly check for and install software updates to ensure optimal performance and compatibility with new vehicle models and sensors.
• Vzdrževanje baterije: If the device has an internal battery, avoid fully discharging it for extended periods. Charge it periodically if stored for a long time.

7. Odpravljanje težav

8. Specifikacije

9. Garancija in podpora

9.1. Informacije o garanciji

XTOOL products typically come with a limited warranty covering defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official XTOOL website for detailed warranty terms and conditions, including duration and coverage specifics.

9.2. Tehnična podpora

For technical assistance, software updates, or any inquiries regarding your XTOOL TP150, please contact XTOOL customer support through their official channels:

• Uradno Webspletno mesto: www.xtooltech.com (Check for support contact details, FAQs, and software downloads)
• Podpora po e-pošti: Glejte razdelek za stike na uradni strani webmesto.
• Spletni viri: Many helpful guides and videos may be available on the XTOOL webspletnem mestu ali njihovih uradnih kanalih družbenih medijev.

When contacting support, please have your product model (XT-TP150) and serial number ready.