Comgrow 3D Printer Filament Dryer Box Instruction Manual

Uvod

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Comgrow 3D Printer Filament Dryer Box. Designed to keep your 3D printing filaments dry and free from moisture, this device ensures optimal print quality and extends the lifespan of your materials. Please read this manual thoroughly before using the product.

Konec izdelkaview

The Comgrow Filament Dryer Box is an essential accessory for any 3D printing enthusiast, designed to combat the common issue of moisture absorption in filaments. It features internal heating and real-time monitoring to provide a stable, dry environment for your materials.

Ključne značilnosti:

• Large Storage Volume: Accommodates 2 rolls of 1kg spools, compatible with 1.75mm/2.85mm PLA, ABS, and SILK filaments. Inner size: 9.29*6.49*9.13 inches (236*165*232mm).
• Odstranjevanje vlage: Actively dries and removes moisture from filaments, preventing common printing issues like entanglement, clogging, poor adhesion, and layer migration.
• Spremljanje v realnem času: Features a 2-inch LCD screen displaying temperature and humidity.
• Nastavljive nastavitve: Temperature range of 40°C to 50°C, with a drying time setting from 6 to 12 hours.
• Zaprta zasnova: Equipped with a silicone cable sheath and Teflon tube for smooth filament output, and a snap-button top cover for good sealing performance.

Figure 1: Comgrow 3D Printer Filament Dryer Box.

Figure 2: Large Capacity of the Filament Dryer Box.

Figure 3: Multiple Functions of the Filament Dryer.

Nastavitev

Follow these steps for the initial setup of your Comgrow Filament Dryer Box:

1. Install the Upper Cover: If the upper cover is not already installed, align it with the base and gently push the pins into place. Ensure it is securely attached.
2. Place Filaments: Unlock the snap button on the side, open the upper cover, and place your filament spools inside. The dryer can accommodate two spools with a diameter of ≤70mm or one bobbin with a width of ≤150mm.
3. Priključite napajanje: Open the sealing cap of the power jack located on the side of the unit and connect the provided power adapter.
4. Feed Filament (if printing directly): If you intend to print directly from the dryer, open the plug on the upper cover and pull the filament out through the outlet. Ensure the filament is placed counter-clockwise for better feeding. Close the upper cover securely.

Figure 4: Setup and Operation Steps.

Navodila za uporabo

Once set up, operating the Comgrow Filament Dryer Box is straightforward:

1. Vklop: Pritisnite gumb za vklop (U symbol) to turn on the device. The screen will display the current temperature and humidity inside the box.
2. Nastavitev temperature: Pritisnite funkcijski gumb (M) to enter temperature setting mode. Use the adjust button (three vertical lines) to cycle through temperature options (40°C, 45°C, 50°C).
3. Nastavite čas sušenja: Pritisnite funkcijski gumb (M) again to enter time setting mode. Use the adjust button to set the desired drying duration (from 6 to 12 hours).
4. Začnite sušiti: After setting both temperature and time, press the function button (M) one more time to confirm and enter the

   Ask a question about this manual

   Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

   Ime E-pošta

   vprašanje Podrobnosti Submit question