XTRFY MZ1 ultralahka žična igralna miška Zy's Rail Edition Navodila za uporabo

1. Izdelek je končanview

The XTRFY MZ1 is an ultra-light wired gaming mouse designed for optimal aim and performance. Developed in collaboration with gaming expert Zy “Rocket Jump Ninja” Rykoa, it features a unique shape, high-quality components, and customizable RGB lighting.

Figure 1: XTRFY MZ1 Gaming Mouse, top-down view z aktivno RGB osvetlitvijo.

2. Nastavitev

2.1 Priklop miške

1. Connect the USB cable from the XTRFY MZ1 mouse to an available USB port on your computer.
2. The mouse is plug-and-play and does not require additional software for basic functionality.

2.2 Začetni pregled

Upon connecting, the mouse's RGB lighting should activate, indicating it is receiving power. Ensure the PTFE gliding surfaces on the bottom of the mouse are free from debris for optimal movement.

Figure 2: Underside of the XTRFY MZ1 mouse, highlighting the PTFE feet and sensor area.

3. Navodila za uporabo

3.1 Osnovne funkcije

• Levi klik: Gumb za primarno dejanje.
• Desni klik: Gumb za sekundarno dejanje.
• Kolesce za pomikanje: Uporablja se za navpično drsenje in kot gumb, na katerega je mogoče klikniti.
• Stranski gumbi: Two programmable buttons located on the left side of the mouse.

3.2 On-Mouse Settings Adjustment

The XTRFY MZ1 allows for direct adjustment of key settings without the need for software. All adjustments are made using buttons on the mouse, typically located on the underside or top.

• CPI (Counts Per Inch) Adjustment: Adjust mouse sensitivity. Multiple levels are available, indicated by LED colors.
• Prilagoditev stopnje anketiranja: Change the frequency at which the mouse reports its position to the computer (e.g., 125 Hz, 500 Hz, 1000 Hz).
• Lift-Off Distance (LOD) Adjustment: Customize the height at which the sensor stops tracking when the mouse is lifted.
• Nadzor osvetlitve RGB: Cycle through individual colors, various LED effects, adjust brightness, or switch lighting off entirely.

Slika 3: Podrobno view of the mouse underside, showing buttons for CPI, polling rate, LOD, and RGB adjustments.

3.3 Unique Shape and Grip

The Zy’s Rail Edition features a unique shape with a slim grip width, low button height, high back, slight curves on the sides, and comfortable grooved buttons. This design is intended to provide optimum aim and a stable grip, particularly for fingertip grip styles.

Slika 4: Stranski profesionalecfile of the XTRFY MZ1, showcasing its distinct ergonomic contours.

3.4 Uradni videoposnetek izdelka

4. Vzdrževanje

4.1 Čiščenje

• Pred čiščenjem miško odklopite iz računalnika.
• Za brisanje površine miške uporabite mehko, suho krpo.
• Pri trdovratni umazaniji rahlo dampKrpo obrišite z vodo ali blago čistilno raztopino. Izogibajte se agresivnim kemikalijam.
• Use compressed air to clear dust from crevices and the sensor area.

4.2 Nega kablov

Avoid sharp bends or excessive pulling on the mouse cable to prevent damage. Store the cable neatly when not in use.

5. Odpravljanje težav

• Miška se ne odziva: Prepričajte se, da je kabel USB varno priključen na računalnik. Poskusite z drugim vhodom USB.
• Nedosledno sledenje: Clean the optical sensor on the underside of the mouse. Ensure your mouse pad surface is clean and suitable for optical tracking.
• RGB osvetlitev ne deluje: Check the on-mouse RGB settings to ensure it hasn't been turned off or set to a very low brightness.
• Nastavitve se ne uporabljajo: Refer to the quick start guide for specific button combinations to adjust CPI, polling rate, and LOD. Ensure you are pressing the correct buttons for the desired change.

6. Specifikacije

7. Garancija in podpora

For warranty information and technical support, please refer to the official Xtrfy website or contact their customer service directly. Details regarding product registration and warranty claims can typically be found in the product packaging or on the manufacturer's support pages.