Redragon Capricornus C502 BW Gaming Chair User Manual

1. Uvod

Hvala za nakupasing the Redragon Capricornus C502 BW Gaming Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new gaming chair. Please read this manual thoroughly before assembly and retain it for future reference.

2. Varnostne informacije

• Pred sestavljanjem se prepričajte, da so vse komponente prisotne in nepoškodovane. Ne uporabljajte, če kateri koli deli manjkajo ali so poškodovani.
• Follow the assembly instructions carefully. Improper assembly can lead to instability and injury.
• Ne stojte na stolu.
• Stola ne uporabljajte kot stopničastega stolčka.
• Med sestavljanjem naj se otroci ne približujejo stolu. Majhni deli lahko predstavljajo nevarnost zadušitve.
• Ne prekoračite največje dovoljene nosilnosti 150 kg (330 lbs).
• Izogibajte se izpostavljanju stola neposredni sončni svetlobi ali ekstremnim temperaturam, da preprečite degradacijo materiala.
• Regularly check all bolts and screws to ensure they are tightened. Retighten as necessary.

3. Vsebina paketa

Prosimo, preverite, ali so v vašem paketu vključene vse naslednje komponente:

• Naslonjalo
• Podstavek sedeža
• Nasloni za roke (2)
• Gas Lift Cylinder (Class 4)
• Pokrov plinskega dvigala
• Zvezdna baza
• Kolesa (5)
• Plošča mehanizma
• Lumbalna blazina
• Blazina za vzglavnik
• Side Covers (2)
• Komplet strojne opreme (vijaki, podložke, imbus ključ)

4. Nastavitev in montaža

Follow these steps to assemble your Redragon Capricornus C502 BW Gaming Chair:

1. Pritrdite kolesca na zvezdasto podnožje: Insert each caster into the holes at the end of the star base until it clicks securely into place.
2. Vstavite plinsko dvigalo: Place the gas lift cylinder into the center hole of the star base. Cover it with the gas lift cover.
3. Attach Mechanism Plate to Seat Base: Align the mechanism plate with the pre-drilled holes on the underside of the seat base. Ensure the front of the mechanism plate faces the front of the seat. Secure with screws and washers using the provided Allen key.
4. Attach Armrests to Seat Base: Secure the armrests to the underside of the seat base using the designated screws.
5. Priključitev sedeža na plinsko dvigalo: Carefully place the assembled seat base onto the gas lift cylinder.
6. Attach Backrest to Seat Base: Align the backrest brackets with the mounting points on the seat base. Secure with screws.
7. Namestitev stranskih pokrovov: Snap the plastic side covers over the backrest brackets to conceal the screws.
8. Pritrdite blazine: Secure the lumbar pillow and headrest pillow to the backrest using their straps.

5. Navodila za uporabo

Your Redragon Capricornus C502 BW Gaming Chair offers several adjustment options for optimal comfort:

• Nastavitev višine: Pull the lever located on the right side of the seat upwards to raise or lower the chair. Release the lever at your desired height.
• Naklon hrbtnega naslona: Pull the lever on the left side of the seat upwards to adjust the backrest angle. Lean back or forward to the desired position (90 to 160 degrees) and release the lever to lock.
• Armrest Adjustment (4D): The armrests can be adjusted in four dimensions: height, forward/backward, left/right, and rotation. Use the buttons or levers on the armrests to make these adjustments.
• Funkcija nagiba/zibanja: Some models may include a tilt function. If available, a knob under the seat allows you to adjust the tension of the rocking mechanism. A lever typically engages or disengages the tilt lock.
• Vzglavniki za ledveni del in vzglavnik: Adjust the position of the lumbar and headrest pillows by sliding them along the backrest straps to find your preferred support.

6. Vzdrževanje

Proper maintenance will extend the life of your gaming chair:

• Čiščenje: Površine iz umetnega usnja obrišite z mehko,amp krpo. Za trdovratne madeže uporabite blago milno raztopino in nato obrišite s čisto, suho krpo.amp krpo. Izogibajte se agresivnim kemikalijam ali abrazivnim čistilom.
• Preverjanje strojne opreme: Periodically check all screws and bolts (every 3-6 months) and tighten them if they have loosened.
• Nega kolesc: Clean any hair or debris from the casters to ensure smooth movement.
• plinsko dvigalo: Plinski dvigalni valj ne potrebuje vzdrževanja. Ne poskušajte ga razstaviti.

7. Odpravljanje težav

Če imate težave s stolom, si oglejte naslednje pogoste težave in rešitve:

• Škripanje stolov: Check and tighten all screws, especially those connecting the backrest to the seat and the mechanism plate to the seat. A small amount of silicone spray on moving parts may help.
• Stol se ne nastavlja po višini: Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may need replacement. Contact customer support.
• Stol se ziblje: Verify that all screws are securely tightened. Ensure the star base is properly assembled and the casters are fully inserted.
• Naslonjalo se ne nagne/zaklene: Check the recline lever for obstructions. Ensure it is fully engaged or disengaged.

8. Specifikacije

9. Garancija in podpora

Redragon products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Redragon website. If you require technical support or have questions regarding your chair, please contact Redragon customer service through their official channels.

Please have your model number (C502-BW) and proof of purchase ready when contacting support.