1. Uvod
This manual provides essential information for the installation, adjustment, and maintenance of your maXpeedingrods Height Adjustable Coilovers Suspension Kit. These coilovers are designed for specific vehicle models to enhance handling and allow for ride height customization.
Združljivost:
- Lexus LS400 XF10 (1990, 1991, 1992, 1993, 1994)
- Toyota Celsior (1990, 1991, 1992, 1993, 1994)
Please read this manual thoroughly before attempting any installation or adjustment.
Slika 1.1: Konecview of the maXpeedingrods Coilovers kit, including front and rear units.
2. Varnostne informacije
Opozorilo: Improper installation or adjustment of suspension components can lead to serious injury or vehicle damage. Professional installation by a qualified technician is highly recommended.
- Vedno nosite ustrezno osebno zaščitno opremo (OZO), vključno z zaščitnimi očali in rokavicami.
- Pred začetkom kakršnih koli del se prepričajte, da je vozilo varno podprto z dvižnimi stojali ali dvigalom. Nikoli se ne zanašajte samo na dvigalko.
- Za delo uporabljajte samo ustrezna orodja.
- Ne spreminjajte nobenih komponent kompleta za podvozje.
- Po namestitvi izvedite nastavitev geometrije koles, da zagotovite pravilno vodljivost vozila in obrabo pnevmatik.
3. Izdelek je končanview in komponente
The maXpeedingrods coilover kit includes the following main components:
- Sprednji sklopi amortizerjev (2)
- Zadnji sklopi amortizerjev (2)
- C Spanners for Height Adjustment (2)
Ključne značilnosti:
- Visoko natezne vzmeti: Front spring rate: 9 kg/mm (504 lbs/in). Rear spring rate: 10 kg/mm (556 lbs/in). These springs are tested for durability, showing less than 0.04% distortion after 600,000 continuous tests.
- Nastavljiva višina: Allows for 1-3 inches of lowering, providing a more aggressive stance. Note: This kit does not maintain original ride height.
- Dvocevna konstrukcija: Offers a longer stroke and higher height adjustment range compared to mono-tube designs, contributing to a more comfortable ride by reducing joint pressure and minimizing friction.
- Vzdržljiv material: Constructed from 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength, and durability.
Image 3.1: Detail of the front rod, featuring a 22mm diameter for extended durability.
Image 3.2: CNC Billet Aluminum Perches and Locking Rings, essential for height adjustment.
Image 3.3: Lightweight rubber top mount designed to reduce noise.
Image 3.4: Illustration of the rubber top mount and radial bearing, contributing to smooth operation.
Image 3.5: High rigidity 55CrSi steel cold-bent coil springs, engineered for performance and durability.
4. Nastavitev in namestitev
Installation of coilovers requires mechanical expertise and specialized tools. It is strongly recommended that installation be performed by a certified automotive technician.
General Installation Steps (Consult a vehicle-specific service manual for detailed instructions):
- Safely lift and support the vehicle. Remove wheels.
- Remove existing suspension components (struts, springs, etc.).
- Install the new maXpeedingrods coilover assemblies. Ensure all bolts are torqued to manufacturer specifications.
- Adjust the ride height as desired (refer to Section 5).
- Ponovno namestite kolesa in spustite vozilo.
- Perform a professional wheel alignment immediately after installation to prevent premature tire wear and ensure safe handling.
Pomembno: The coilovers are designed for a lowered stance and will not maintain the original ride height of your vehicle.
5. Upravljanje in prilagajanje
Nastavitev višine:
The coilovers allow for a ride height adjustment range of 1 to 3 inches lower than stock. This adjustment is performed using the provided C spanners to rotate the locking rings on the coilover body.
- Safely lift and support the vehicle to relieve pressure from the suspension.
- Loosen the upper locking ring using a C spanner.
- Rotate the lower spring perch to achieve the desired ride height. Turning clockwise will lower the vehicle; counter-clockwise will raise it.
- Once the desired height is set, tighten the upper locking ring against the lower spring perch to secure the adjustment.
- Repeat for all four coilovers, ensuring consistent height settings across the axle (front left/right, rear left/right).
- Lower the vehicle and bounce the suspension to settle it. Re-check ride height and adjust as necessary.
Opomba: Damping force of these coilovers is preset and not user-adjustable.
Image 5.1: Diagram illustrating independent ride height and spring tension settings.
6. Vzdrževanje
Regular inspection and maintenance will ensure the longevity and performance of your coilovers.
- Redni pregled: Periodically inspect all coilover components for signs of wear, damage, or leaks. Check for loose bolts or nuts.
- Čiščenje: Keep the coilover bodies and springs clean from dirt, salt, and debris, especially after driving in harsh conditions. Use mild soap and water.
- Preverjanje navora: After the initial installation and after approximately 500 miles, re-check the torque on all mounting bolts and nuts. Refer to your vehicle's service manual for specific torque values.
- Poravnava: If you notice uneven tire wear or changes in handling, have a professional alignment performed.
7. Odpravljanje težav
If you experience any issues with your coilovers, consider the following common troubleshooting steps:
| Simptom | Možen vzrok | rešitev |
|---|---|---|
| Nenavadni zvoki (tropotanje, škripanje) | Ohlapni pritrdilni vijaki, obrabljene puše, nepravilna namestitev. | Inspect all mounting points and torque to specifications. Check for damaged bushings. Re-install if necessary. |
| Neenakomerna višina vožnje | Nepravilna nastavitev višine, neenakomerna prednapetost vzmeti. | Re-adjust ride height on all four corners, ensuring consistency. |
| Poor handling or steering response | Incorrect wheel alignment, improper tire pressure. | Have a professional wheel alignment performed. Check tire pressures. |
| Leaking shock absorber | Damaged seal or internal component. | Contact maXpeedingrods customer support for assistance or warranty claim. |
If problems persist after attempting these steps, please contact maXpeedingrods customer support.
8. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Združljivost | Lexus LS400 XF10 (1990-1994), Toyota Celsior (1990-1994) |
| Sprednja vzmetna trdnost | 9 kg/mm (504 lbs/in) |
| Zadnja vzmetna trdnost | 10 kg/mm (556 lbs/in) |
| Območje nastavitve višine | 1-3 inches lowering from stock |
| Shock Absorber Type | Twin-tube, Preset Damping |
| Material | 6061 aluminijeva zlitina s T6 |
| Zunanji zaključek | Aluminij |
| Položaj avtomobilskega dela | Front and Rear (Full Kit) |
Image 8.1: Detailed dimensions for front and rear coilover units, including spring rates and lengths.
9. Garancija in podpora
Informacije o garanciji:
For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official maXpeedingrods website. Generally, products are covered by a manufacturer's warranty against defects in materials and workmanship.
Podpora strankam:
If you have any questions, require technical assistance, or need to initiate a return or warranty claim, please contact maXpeedingrods customer support. You may find contact information on the maXpeedingrods official webspletnem mestu ali prek vašega nakupovalnega mesta.
Vrne: This product typically includes a 30-day easy return policy from the seller, maXpeedingrods-us.
Za neposredno podporo obiščite Trgovina maXpeedingrods na Amazonu ali se obrnite na njihov oddelek za pomoč strankam.