Hilitand 90mm CPU Air Cooler Instruction Manual

1. Uvod

Thank you for choosing the Hilitand 90mm CPU Air Cooler. This manual provides essential information for the proper installation, operation, and maintenance of your CPU cooler. Please read these instructions carefully before proceeding with installation to ensure optimal performance and longevity of your product.

2. Varnostne informacije

• Pred nameščanjem ali odstranjevanjem kakršnih koli komponent vedno izključite napajanje računalnika.
• Handle the CPU cooler and other computer components with care to avoid damage.
• Zagotovite ustrezno ozemljitev, da preprečite elektrostatično razelektritev (ESD).
• Hraniti izven dosega otrok.

3. Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• 1 x CPU Cooler (with integrated 90mm fan and heat sink)
• 1 x Backplane (for motherboard mounting)

Image: CPU Cooler and its accompanying back panel.

4. Izdelek je končanview

The Hilitand 90mm CPU Air Cooler is designed to provide efficient heat dissipation for your CPU. It features a 90mm PWM fan and four direct-contact copper heat pipes, ensuring effective cooling while maintaining a low noise level.

Ključne značilnosti:

• Učinkovito odvajanje toplote: Equipped with 4 heat pipes and a 90mm PWM fan for excellent heat transfer. Features an aluminum alloy heat sink with a large dissipation area.
• Direct Contact Heat Pipes: Utilizes 4-heat copper tubes with direct contact technology for reliable and fast heat dissipation.
• PWM ventilator: The 9cm cooling fan offers an efficient balance of cooling performance and low noise operation.
• Enostavna namestitev: Includes a back plate for straightforward mounting.
• Široka združljivost: Suitable for LGA 2011, 1366, 1150, 1151, 1155, and 1156 platforms.

Slika: spredaj view of the CPU cooler, emphasizing the aluminum alloy heat sink and platform compatibility.

Slika: Zgoraj view of the CPU cooler, showing the 9cm fan for strong airflow.

5. Namestitev

Follow these steps to install the Hilitand CPU Air Cooler:

1. Pripravite svoj sistem: Izklopite računalnik in odklopite vse kable. Odprite ohišje računalnika, da dostopite do matične plošče.
2. Remove Existing Cooler (if applicable): Carefully remove any existing CPU cooler. Clean the CPU surface of any old thermal paste using isopropyl alcohol.
3. Namestite zadnjo ploščo: Position the provided back panel on the rear side of your motherboard, aligning it with the CPU socket mounting holes.
4. Nanesite termalno pasto: Apply a small amount of thermal paste (not included) to the center of your CPU's integrated heat spreader (IHS).
5. Mount the CPU Cooler: Place the CPU cooler onto the CPU, aligning the mounting screws with the holes on the back panel. Secure the cooler by tightening the screws in a diagonal pattern until snug. Do not overtighten.
6. Connect the Fan Cable: Priključite 4-pinski kabel PWM ventilatorja iz hladilnika na priključek CPU_FAN na matični plošči.
7. Zaprite ohišje in vklopite napravo: Close your computer case, reconnect all cables, and power on your system. Verify that the fan is spinning.

Image: Visual guide for installing the CPU cooler and back panel.

6. Delovanje

Once installed, the Hilitand CPU Air Cooler operates automatically. The PWM (Pulse Width Modulation) function allows your motherboard to control the fan speed based on the CPU temperature, providing efficient cooling when needed and quieter operation during lighter loads. Ensure your motherboard's BIOS/UEFI settings are configured to manage the CPU fan appropriately.

7. Vzdrževanje

Regular maintenance helps ensure optimal performance and extends the lifespan of your CPU cooler:

• Odstranjevanje prahu: Periodically clean the fan blades and heat sink fins to remove accumulated dust. Use compressed air or a soft brush. Ensure the fan is not spinning during cleaning.
• Termalna pasta: Consider reapplying thermal paste every 2-3 years, or if you remove the cooler for any reason, to maintain efficient heat transfer.
• Pregled ventilatorja: Check the fan periodically for any unusual noises or reduced rotation, which may indicate wear or obstruction.

8. Odpravljanje težav

If you encounter issues with your CPU cooler, consider the following:

• Ventilator se ne vrti: Ensure the 4-pin fan cable is securely connected to the CPU_FAN header on the motherboard. Check BIOS/UEFI settings to confirm fan control is enabled.
• Visoke temperature procesorja: Verify that the cooler is properly seated on the CPU and that thermal paste was applied correctly. Ensure there is adequate airflow within your computer case. Clean any dust from the heat sink and fan.
• Nenavaden hrup ventilatorja: Check for any cables or obstructions hitting the fan blades. If the noise persists, the fan bearing may be worn.

9. Specifikacije

10. Garancija in podpora

For warranty information or technical support, please refer to the retailer's policy or contact Hilitand customer service through their official channels. Keep your purchase receipt as proof of purchase.