IROAD NX7 Dash Cam User Manual

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your IROAD NX7 Dash Cam. The IROAD NX7 is a high-performance 2-channel Full HD 1080P dash camera designed to record driving footage and provide parking surveillance. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• IROAD NX7 Main Unit (Front Camera)
• Zadnja kamera
• Priključni kabel za zadnjo kamero
• OBD-II Power Cable (for general and hybrid vehicles)
• 16 GB MicroSD kartica
• Uporabniški priročnik (ta dokument)
• Adhesive Mounts
• Polnilni kabel
• GPS Antenna (optional add-on)

Image: IROAD NX7 Dash Cam main unit and rear camera, illustrating the primary components included in the package.

Konec izdelkaview

Familiarize yourself with the components and their functions.

Image: Detailed diagram showing the front camera (main unit) and rear camera with labeled parts such as camera lens, security LED, operation LED, bracket, DC-IN power terminal, GPS terminal, power switch, memory card slot, front terminal, and rear camera lens.

Main Unit (Front Camera)

• Objektiv sprednje kamere: Records the view through the front windshield.
• Varnostna LED: Indicates recording status and acts as a security deterrent.
• LED za delovanje: Shows the device's operational status.
• 3-inch Touch Panel Display: Za viewv živo footage, playback, and accessing settings.
• Reža za kartico MicroSD: Insert the provided MicroSD card for video storage.
• Stikalo za vklop: Za vklop ali izklop naprave.
• DC-IN Power Terminal: Priključi se na napajalni kabel.
• GPS Terminal: Connects to the optional GPS antenna for location and speed data.
• Rear Camera Terminal: Priključi kabel zadnje kamere.

Zadnja kamera

• Zadnja leča kamere: Records the view through the rear windshield.
• LED za delovanje: Indicates the rear camera's operational status.

Nastavitev

1. Vstavljanje kartice MicroSD

1. Prepričajte se, da je kamera na armaturni plošči izklopljena.
2. Locate the MicroSD card slot on the side of the main unit.
3. Priloženo 16 GB kartico MicroSD vstavite v režo, dokler se ne zaskoči. Pazite na pravilno orientacijo.

2. Main Unit Installation (Front Camera)

1. Clean the area on your front windshield where you intend to mount the dash cam.
2. Attach the adhesive mount to the main unit.
3. Remove the protective film from the adhesive mount.
4. Firmly press the dash cam onto the chosen spot on the windshield, ensuring a clear view of the road. Position it centrally, behind the rearview mirror if possible, to avoid obstructing your view.

3. Namestitev zadnje kamere

1. Clean the area on your rear windshield for the rear camera.
2. Attach the adhesive mount to the rear camera.
3. Remove the protective film and firmly press the rear camera onto the rear windshield, ensuring a clear view.
4. Connect the rear camera to the main unit using the provided rear camera connection cable. Route the cable neatly along the vehicle's headliner and pillars to conceal it.

4. Power Connection (OBD-II)

1. Poiščite priključek OBD-II v vašem vozilu (običajno pod armaturno ploščo na voznikovi strani).
2. Connect the OBD-II power cable to the OBD-II port.
3. Connect the other end of the OBD-II power cable to the DC-IN power terminal on the main unit.
4. Napajalni kabel napeljite lepo, da preprečite motenje krmilnih elementov za vožnjo.

5. GPS Antenna Connection (Optional)

1. If using the optional GPS antenna, connect it to the GPS terminal on the main unit.
2. GPS anteno namestite na mesto z neoviranim view of the sky, typically on the dashboard or near the windshield.

Navodila za uporabo

Vklop/izklop

• Vklop: Once connected to power, the dash cam will automatically power on when the vehicle's ignition is turned on.
• Ugasniti: The dash cam will automatically power off when the vehicle's ignition is turned off. You can also manually power off using the power switch.

Načini snemanja

The IROAD NX7 supports various recording modes:

• Nenehno snemanje: Automatically starts recording when the device powers on. Footage is saved in short segments and overwritten by new recordings once the MicroSD card is full (loop recording).
• Event Recording (Impact Recording): When an impact is detected by the G-sensor, the dash cam automatically saves the current footage as an event file, kar preprečuje njegovo prepisovanje.
• Parking Surveillance (24-hour Recording):
  • Zaznavanje gibanja: Records automatically when motion is detected around the vehicle while parked.
  • Impact Recording: Zabeleži, kdaj je med parkiranjem zaznan trk.

  Note: Parking surveillance requires a continuous power supply, typically provided by the OBD-II cable.

Delovanje plošče na dotik

The 3-inch touch panel allows for easy navigation and control:

• Tap icons to access menus, settings, and playback.
• Swipe to navigate through lists or video files.
• Adjust settings such as recording resolution, G-sensor sensitivity, and parking mode options.

Viewing Posnetki

• Na napravi: Access the playback menu on the touch screen to view recorded videos directly.
• On a Computer: Remove the MicroSD card from the dash cam and insert it into a computer's card reader. Use the dedicated IROAD PC Viewer software (available for download from the IROAD webspletno mesto) do view and manage recordings.

LED Signal Compatibility

The IROAD NX7 is designed to minimize flicker when recording LED traffic signals, ensuring clear capture of signal lights.

Vzdrževanje

Upravljanje kartic MicroSD

• Redno oblikovanje: It is recommended to format the MicroSD card regularly (e.g., once a month) to maintain optimal recording performance and prevent data corruption. This can usually be done through the dash cam's settings menu or via the PC Viewer programska oprema.
• Življenjska doba kartice: MicroSD cards have a limited lifespan due to continuous writing cycles. Replace the card if you experience frequent recording errors or data loss.

Čiščenje naprave

• Use a soft, dry cloth to clean the dash cam's body and lenses.
• Ne uporabljajte abrazivnih čistil ali topil, saj lahko poškodujejo napravo.
• Ensure the lenses are clean and free of smudges for clear video quality.

Odpravljanje težav

Specifikacije

Garancija in podpora

Specific warranty information for the IROAD NX7 Dash Cam is typically provided with the product packaging or can be found on the official IROAD website. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please refer to the contact information provided by your retailer or the IROAD official support channels.

Always ensure you are using official IROAD accessories and software for optimal performance and to maintain warranty validity.