MediaShop M24678 Phoenix Free Flight Cordless Steam Iron User Manual

1. Uvod

Thank you for choosing the MediaShop M24678 Phoenix Free Flight Cordless Steam Iron. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read these instructions thoroughly before first use and keep them for future reference.

Vsebina paketa:

• 1 x MediaShop M24678 Phoenix Free Flight Cordless Steam Iron (Gold/Black)
• 1 x polnilna osnova
• 1 x Water Filling Cup
• 1 x Uporabniški priročnik (ta dokument)

2. Pomembna varnostna navodila

Pri uporabi električnih naprav je treba vedno upoštevati osnovne varnostne ukrepe, da zmanjšate nevarnost požara, električnega udara in telesnih poškodb.

• Vedno zagotovite voltagOznaka e na nalepki z nazivnimi vrednostmi ustreza glasnosti vašega omrežja.tage.
• Likalnika, polnilne postaje ali napajalnega kabla ne potapljajte v vodo ali druge tekočine.
• Likalnika ne puščajte brez nadzora, ko je priključen na električno omrežje ali ko je vroč.
• Likalnik in njegov kabel hranite izven dosega otrok, ko je vklopljen ali se ohlaja.
• Likalnik uporabljajte samo za predvideni namen.
• Naprave ne uporabljajte s poškodovanim kablom ali vtičem, ali potem, ko naprava ne deluje pravilno, je padla ali kakor koli poškodovana.
• Likalnik vedno postavite na stabilno, toplotno odporno površino, ko ga pustite mirovati.
• Pri obračanju likalnika na glavo bodite previdni, saj je v rezervoarju lahko vroča voda.
• Unplug the iron from the outlet before filling with water, cleaning, or storing.
• Pare nikoli ne usmerjajte v ljudi ali hišne ljubljenčke.

3. Izdelek je končanview

Familiarize yourself with the components of your MediaShop M24678 Phoenix Free Flight Cordless Steam Iron.

Slika 1: The MediaShop M24678 Phoenix Free Flight Cordless Steam Iron in gold and black. This image displays the overall design of the iron, including its handle, soleplate, and the charging base.

Ključne komponente:

1. Likalna plošča: Stainless steel ironing surface.
2. Rezervoar za vodo: Reservoir for water, visible through a transparent window.
3. Dovod vode: Opening for filling the water tank, usually with a cover.
4. Razpršilna šoba: Oddaja fino vodno meglico.
5. Gumb Steam: Activates a burst of steam.
6. Gumb za pršenje: Aktivira funkcijo pršenja.
7. Regulator temperature: Prilagodi temperaturo za različne vrste tkanin.
8. Drsnik za nadzor pare: Adjusts the amount of continuous steam or selects dry ironing.
9. Indikatorska lučka: Lučka sveti, ko se likalnik segreva, in ugasne, ko je dosežena nastavljena temperatura.
10. Polnilna osnova: Provides power to heat the iron and allows for cordless operation.
11. Napajalni kabel: Connects the charging base to the electrical outlet.

Note: A detailed diagram showing each numbered part would typically be included here.

4. Nastavitev in prva uporaba

Pred prvo uporabo:

• Remove any protective film or stickers from the soleplate.
• It is normal for a slight odor or smoke to occur during the first few minutes of use as manufacturing residues burn off. Ensure good ventilation.
• Zlikajte star kos damp cloth to clean the soleplate and remove any residues.

Polnjenje rezervoarja za vodo:

1. Ensure the iron is unplugged from the power outlet and has cooled down.
2. Set the steam control slider to the "Dry Ironing" (no steam) position.
3. Odprite pokrov dovoda vode.
4. Using the provided filling cup, carefully pour tap water into the water tank up to the "MAX" fill line. Do not overfill.
5. Dobro zaprite pokrov dovoda vode.

Note: Distilled or demineralized water is recommended to prolong the life of your iron, especially in areas with hard water. Do not use perfumed water, vinegar, starch, or descaling agents in the water tank.

Connecting to Power and Heating:

1. Place the charging base on a stable, heat-resistant surface.
2. Plug the power cord of the charging base into a suitable electrical outlet.
3. Place the iron onto the charging base. The indicator light on the iron or base will illuminate, indicating that the iron is heating.
4. Set the temperature control dial to the desired setting according to the fabric type.
5. Wait for the indicator light to turn off, which signifies that the iron has reached the selected temperature. The iron is now ready for use.

5. Navodila za uporabo

Izbira temperature:

Always check the garment's care label for ironing instructions. If unsure, start with a low temperature and test on an inconspicuous area.

Suho likanje:

• Ensure the water tank is empty or the steam control slider is set to the "Dry Ironing" position.
• Place the iron on the charging base and allow it to heat to the desired temperature.
• Once the indicator light turns off, remove the iron from the base and begin ironing. Return the iron to the base periodically to maintain temperature.

Parno likanje:

• Napolnite rezervoar za vodo, kot je opisano v poglavju »Nastavitev«.
• Set the temperature control dial to a steam-suitable setting (usually •• or •••). Steam will not be produced at lower temperatures.
• Place the iron on the charging base and allow it to heat until the indicator light turns off.
• Once hot, remove the iron from the base and set the steam control slider to the desired steam level.
• Move the iron over the fabric. For stubborn creases, press the steam button for an extra burst of steam.
• Return the iron to the charging base when not actively ironing to reheat and maintain steam production.

Funkcija pršenja:

The spray function can be used with both dry and steam ironing to dampsl trdovratne gube.

• Prepričajte se, da je rezervoar za vodo napolnjen.
• Pritisnite gumb za pršenje, da na tkanino izpustite fino vodno meglico.

Navpično kuhanje na pari:

This function is useful for removing creases from hanging garments, curtains, or drapes.

• Fill the water tank and set the iron to a high temperature (•••).
• Allow the iron to heat fully on the charging base.
• Likalnik držite navpično, nekaj centimetrov stran od tkanine.
• Press the steam button repeatedly to release bursts of steam.
• Caution: Do not direct steam at people or pets.

6. Vzdrževanje in shranjevanje

Čiščenje likalnika:

• Pred čiščenjem vedno izključite likalnik iz električnega omrežja in ga pustite, da se popolnoma ohladi.
• Obrišite zunanjost likalnika z adamp krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Za čiščenje likalne plošče jo obrišite zamp cloth and a mild, non-abrasive cleaner if necessary. Avoid scratching the soleplate.
• Never use metal scouring pads or abrasive cleaners on the soleplate.

Odstranjevanje vodnega kamna (funkcija samočiščenja):

Regular descaling helps maintain steam performance and prolong the life of your iron. Perform this function monthly or more often in hard water areas.

1. Napolnite rezervoar za vodo do črte MAX.
2. Set the steam control to "Dry Ironing" and the temperature dial to MAX.
3. Place the iron on the charging base and allow it to heat until the indicator light turns off.
4. Unplug the iron from the wall outlet.
5. Likalnik držite vodoravno nad umivalnikom.
6. Press and hold the self-clean button (if available, otherwise use the steam burst button repeatedly while shaking the iron gently). Hot water and steam will be expelled from the soleplate, carrying away scale and impurities.
7. Nadaljujte, dokler se rezervoar za vodo ne izprazni.
8. Place the iron back on the charging base and allow it to heat up again to dry the soleplate.
9. Unplug and let it cool completely before storing.

Note: The specific self-clean button location may vary. Refer to a product diagram if available. If no dedicated button, repeated steam bursts can help.

Shranjevanje:

• Pred shranjevanjem se prepričajte, da je likalnik izklopljen iz električnega omrežja in popolnoma ohlajen.
• Iz rezervoarja izpraznite preostalo vodo.
• Store the iron upright on its charging base in a dry, safe place, out of reach of children.

7. Odpravljanje težav

Preden se obrnete na podporo strankam, si oglejte naslednjo tabelo, kjer so navedene pogoste težave in njihove rešitve.

8. Specifikacije

9. Garancija in podpora

This MediaShop M24678 Phoenix Free Flight Cordless Steam Iron comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.

For technical support, service, or to inquire about replacement parts, please contact MediaShop customer service through their official website or the contact information provided with your purchase. When contacting support, please have your model number (M24678) and purchase date available.

Webspletno mesto: www.mediashop.tv (Opomba: To je generično nadomestno besedilo website for MediaShop, please refer to your product documentation for the exact support contact details.)