EGLO Palmaves 3 Dimmable LED Ceiling Light

Uvod

Welcome to the EGLO Palmaves 3 Dimmable LED Ceiling Light instruction manual. This guide provides essential information for the safe and efficient use of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

The EGLO Palmaves 3 features a modern design with two interlocking LED rings, offering adjustable brightness, color temperature from warm white to cool white, and indirect RGB colored lighting, all controllable via the included remote.

Image: EGLO Palmaves 3 LED Ceiling Light, front view.

Varnostna navodila

• Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or any service.
• Namestitev mora opraviti usposobljen električar v skladu z lokalnimi električnimi predpisi in predpisi.
• Do not modify the fixture. Use only specified parts and accessories.
• Ensure the mounting surface can safely support the weight of the fixture.
• Izogibajte se neposredni izpostavljenosti oči LED svetlobnemu viru.
• Daljinski upravljalnik hranite stran od vode in ekstremnih temperatur.

Vsebina paketa

Pred začetkom namestitve preverite, ali so vse komponente prisotne in nepoškodovane:

• EGLO Palmaves 3 LED Ceiling Light Fixture
• Daljinski upravljalnik
• Pritrdilni material (vijaki, stenski vložki)
• Navodila za uporabo

Nastavitev in namestitev

Pomembno: Ensure the main power supply is turned off before any installation work.

1. Priprava: Turn off the main power supply at the circuit breaker. Confirm the power is completely disconnected using a voltage tester.
2. Označevanje: Hold the mounting bracket against the ceiling at the desired installation location. Mark the positions for drilling holes.
3. Vrtanje: Drill holes at the marked positions. Insert appropriate wall plugs (if necessary for your ceiling type) into the drilled holes.
4. Montažni nosilec: Nosilec pritrdite na strop s priloženimi vijaki. Prepričajte se, da je trdno pritrjen.
5. Ožičenje: Connect the electrical wires from the ceiling to the terminal block on the fixture. Ensure correct polarity: Live (L), Neutral (N), and Earth (⍎). If unsure, consult a qualified electrician.
6. Pritrdite napeljavo: Carefully attach the ceiling light fixture to the mounting bracket, securing it with the provided screws or fasteners. Ensure the fixture is stable and flush with the ceiling.
7. Vklop: Obnovite napajanje na glavnem odklopniku.
8. Nastavitev daljinskega upravljalnika: Insert 2 AAA batteries (not included) into the remote control, observing correct polarity.

Slika: Pod kotom view of the EGLO Palmaves 3 LED Ceiling Light, showing its two interlocking rings.

Navodila za uporabo

Your EGLO Palmaves 3 ceiling light can be controlled via the included remote control or a standard wall switch.

Funkcije daljinskega upravljalnika:

The remote control allows for full functionality of your ceiling light.

Image: EGLO Palmaves 3 Remote Control.

• Gumb za vklop (vklop/izklop): Prižge ali ugasne luč.
• Prilagoditev svetlosti: Use the sun icons (brighter/dimmer) to adjust the light intensity.
• Color Temperature Adjustment (K+/K-): Changes the white light from warm white (3000 Kelvin) to neutral white to cool white (6500 Kelvin).
• Vklop/izklop RGB: Activates or deactivates the indirect RGB colored lighting.
• Izbira barv RGB: Use the 'R G B' button to cycle through various RGB colors or the dedicated RGB button for specific color modes.
• Funkcija pomnilnika: The light retains the last used settings (brightness, color temperature, RGB color) when turned off and on via the remote control.

Nadzor stenskega stikala:

If you do not use the remote control, you can cycle through different white light color temperatures (warm white, neutral white, cool white) by repeatedly turning the wall switch off and on quickly.

Image: EGLO Palmaves 3 emitting warm white light.

Image: EGLO Palmaves 3 with indirect RGB red lighting.

Vzdrževanje

• Čiščenje: Pred čiščenjem izključite napajanje. Obrišite napravo z mehko, suho ali rahlo vlažno krpo.amp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electrical components.
• LED: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the LED components. If the LEDs fail, the entire fixture may need replacement.

Odpravljanje težav

If you encounter issues with your EGLO Palmaves 3 ceiling light, refer to the following common problems and solutions:

• Lučka se ne prižge:
  • Preverite, ali je napajanje priključeno in ali je odklopnik vklopljen.
  • Ensure the remote control batteries are correctly inserted and not depleted. Replace if necessary.
  • Verify all wiring connections are secure at the terminal block.
• Daljinski upravljalnik ne deluje:
  • Zamenjajte baterije AAA v daljinskem upravljalniku.
  • Prepričajte se, da med daljinskim upravljalnikom in svetilko ni ovir.
  • Confirm you are within the remote control's operating range.
• Luč nepričakovano utripa ali se zatemni:
  • Check for a stable power supply to the fixture.
  • Ensure the dimming function is not accidentally activated or set to a very low level.

If problems persist after attempting these solutions, contact EGLO customer support or a qualified electrician.

Specifikacije

Detailed technical specifications for the EGLO Palmaves 3 LED Ceiling Light:

Dimenzije:

• Large Light Element Diameter: 39 cm (15.35 inches)
• Small Light Element Diameter: 29 cm (11.42 inches)
• Višina: 6.8 cm (2.68 palca)
• Skupna dolžina: 56 cm (22.05 palca)

Image: Dimensions of the EGLO Palmaves 3 LED Ceiling Light.

Image: Key features including energy-saving LEDs, plastic construction, and 3000-6500K color temperature range.

Garancija in podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official EGLO website. EGLO is committed to providing quality products and customer satisfaction.

Contact EGLO customer service for further assistance with product inquiries, troubleshooting, or warranty claims.