SIIG Thunderbolt 3 Dock (JU-DK0K11-S1) User Manual

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your SIIG Thunderbolt 3 Dock, model JU-DK0K11-S1. This docking station is designed to expand the connectivity and storage capabilities of your Thunderbolt 3-enabled computer, offering multiple ports for peripherals, high-resolution display outputs, and dual M.2 NVMe SSD slots.

Pred uporabo izdelka natančno preberite ta priročnik, da zagotovite pravilno nastavitev in delovanje.

Lastnosti izdelka

• Napredna povezljivost: Transforms a single Thunderbolt 3 port into a comprehensive workstation with additional Thunderbolt 3, DisplayPort 1.4, USB 3.1 10Gbps Type A/C, USB 3.1 Gen1 Type-A with BC 1.2, Gigabit Ethernet, SD (UHS-II) memory card reader, and stereo audio/microphone ports.
• Dostava energije: Supports Power Delivery 3.0, providing up to 96 watts of charging to your host laptop.
• Video izhod visoke ločljivosti: Connect two 4K@60Hz Ultra HD displays simultaneously via Thunderbolt 3 and DisplayPort. A single 8K@30Hz display is supported through the source Thunderbolt 3 DP 1.4 port.
• Dual M.2 NVMe Storage: Features two M Key 2280 form factor SSD slots, allowing for up to 8TB per SSD (total 16TB) and data transfer speeds up to 1500Mbps per installed SSD. Compatible with M Key PCIe NVMe/AHCI M.2 SSDs only (SSD not included).
• Vrata USB 3.1: Includes two USB-A 3.1 Gen1 with BC 1.2 (5V/2.4A) ports (up to 5Gbps), one USB-A 3.1 Gen2 BC 1.2 (5V/2.4A) port (up to 10Gbps), and one USB-C 3.1 Gen2 port (5V/3A) (up to 10Gbps).
• SD Memory Card Reader: SD (UHS-II) compatible, supporting data transfer up to 270Mbps and a maximum capacity of 2TB.

Vsebina paketa

The package for the SIIG Thunderbolt 3 Dock (JU-DK0K11-S1) typically includes the following items:

• SIIG Thunderbolt 3 Dock (JU-DK0K11-S1)
• Napajalnik (150 W)
• Thunderbolt 3 kabel
• Uporabniški priročnik
• M.2 SSD mounting screws (typically in a separate bag)

Image: Contents of the SIIG Thunderbolt 3 Dock package.

Konec izdelkaview

Familiarize yourself with the ports and indicators on your SIIG Thunderbolt 3 Dock.

Image: Front and rear panel connections of the SIIG Thunderbolt 3 Dock.

Vrata na sprednji plošči:

• 3.5 mm priključek za mikrofon: Za priklop mikrofona.
• 3.5mm Stereo Audio Jack: Za priklop slušalk ali zvočnikov.
• SD (UHS-II) Card Reader: Za branje SD pomnilniških kartic.
• USB-A 3.1 Gen 1 (5Gbps / BC 1.2): For connecting USB-A devices and charging.
• USB-C 3.1 Gen 2 (10Gbps / 15W Charging): For connecting USB-C devices and charging.
• LED za napajanje: Označuje stanje napajanja.

Vrata na zadnji plošči:

• Thunderbolt 3 Host (PD 87W / DP 1.4 Alt Mode): Connects to your computer. Provides power delivery and display output.
• Thunderbolt 3 (Daisy Chain Port): For connecting additional Thunderbolt devices.
• DisplayPort 1.4 Video Output: Za priklop zunanjega zaslona.
• USB-A 3.1 Gen 2 (10Gbps / BC 1.2): For connecting USB-A devices and charging.
• USB-A 3.1 Gen 1 (5Gbps / BC 1.2): For connecting USB-A devices and charging.
• Gigabit LAN: Za žično omrežno povezavo.
• Power Jack (150W): Priklopi se na priloženi napajalnik.

Navodila za namestitev

1. Priključite napajanje: Connect the included 150W power adapter to the Power Jack on the rear of the docking station, then plug the adapter into a power outlet. The Power LED on the front panel should illuminate.
2. Povezava z gostiteljskim računalnikom: Use the provided Thunderbolt 3 cable to connect the "Thunderbolt 3 Host" port on the rear of the dock to a Thunderbolt 3 port on your laptop or desktop computer.
3. Install NVMe SSDs (Optional): If you plan to use the internal M.2 NVMe storage, refer to the "NVMe SSD Installation" section for detailed instructions before connecting other peripherals.
4. Povežite zaslone:
   • For a single display, connect your monitor to the DisplayPort 1.4 output or use a Thunderbolt 3 to DisplayPort/HDMI adapter with the Thunderbolt 3 daisy chain port.
   • For dual displays, connect one monitor to the DisplayPort 1.4 output and the second monitor to the Thunderbolt 3 daisy chain port using an appropriate adapter or a Thunderbolt 3 monitor.
5. Povežite zunanje naprave: Connect your USB devices (keyboard, mouse, external drives), Ethernet cable, and audio devices to the corresponding ports on the dock.
6. Namestitev gonilnika: In most cases, the dock is plug-and-play. However, ensure your computer's Thunderbolt 3 drivers and firmware are up to date for optimal performance.

Navodila za uporabo

Once the SIIG Thunderbolt 3 Dock is set up, it operates automatically with your connected computer. Here are some key operational aspects:

• Vklop/izklop: The dock powers on automatically when connected to power and a host computer. Disconnecting the host computer or power adapter will power it off.
• Polnjenje: Your host laptop will receive up to 96W of power through the Thunderbolt 3 host connection. USB ports also provide charging capabilities as specified in the "Product Overview"oddelek".
• Vroča zamenjava: Most USB and audio devices can be connected or disconnected while the dock is in operation. For external displays and NVMe SSDs, it is recommended to disconnect them safely through your operating system before physically removing them.
• Daisy Chaining: The Thunderbolt 3 daisy chain port allows you to connect up to five additional Thunderbolt devices, expanding your connectivity further.

Konfiguracija zaslona

The SIIG Thunderbolt 3 Dock supports various display configurations:

Image: Display resolution capabilities of the SIIG Thunderbolt 3 Dock.

• Single Display (8K@30Hz): Connect a single 8K monitor to the DisplayPort 1.4 output. Ensure your host computer's Thunderbolt 3 port supports DP 1.4 Alt Mode.
• Dual Displays (4K@60Hz): Connect one 4K monitor to the DisplayPort 1.4 output and a second 4K monitor to the Thunderbolt 3 daisy chain port (using a compatible adapter or monitor).
• Združljivost: For Mac M1/M2/M3 Pro/Max, the dock supports single extended video output.

Adjust display settings (resolution, arrangement, mirroring/extending) through your operating system's display preferences.

NVMe SSD Installation

The dock supports two M Key 2280 form factor PCIe NVMe/AHCI M.2 SSDs. Follow these steps to install an SSD:

Image: Internal structure showing dual M.2 NVMe SSD slots and compatible SSD types.

1. Ugasniti: Ensure the docking station is disconnected from power and your host computer.
2. Access Internal Slots: Loosen the two thumb screws on the rear of the dock. Gently slide the internal tray out from the front of the enclosure.
3. Odstrani pokrov: Remove the two Phillips screws securing the internal cover to access the M.2 slots.
4. Namestitev SSD-ja: Carefully insert your M Key 2280 PCIe NVMe/AHCI M.2 SSD into an available slot at a slight angle. Push down gently and secure it with the provided M2.5 screw.
5. Ponovno sestavite: Replace the internal cover and secure it with the Phillips screws. Slide the internal tray back into the enclosure and tighten the thumb screws.
6. Format SSD-ja: After connecting the dock to your computer, the new SSD(s) will appear as unformatted drives. Use your operating system's disk management utility to initialize and format the SSD(s) before use.

Opomba: Only M Key PCIe NVMe/AHCI M.2 SSDs are supported. B+M Key SATA SSDs are not compatible.

Specifikacije

Odpravljanje težav

No Power / Power LED Off:

• Ensure the 150W power adapter is securely connected to the dock and a working power outlet.
• Preverite, ali vtičnica deluje.

Brez izhoda za prikaz:

• Confirm the Thunderbolt 3 cable is securely connected between the dock and your host computer.
• Ensure your monitor is powered on and set to the correct input source.
• Check display cables (DisplayPort, Thunderbolt to DisplayPort/HDMI) for secure connections.
• Update your computer's graphics drivers and Thunderbolt 3 drivers/firmware.
• Verify your computer's Thunderbolt 3 port supports DP Alt Mode for video output.
• For Mac M1/M2/M3, remember that only single extended display output is supported.

Naprave USB ne delujejo:

• Poskusite priključiti napravo USB na druga vrata USB na priklopni postaji.
• Connect the USB device directly to your computer to confirm it is functional.
• Ensure the dock is properly connected to your host computer via Thunderbolt 3.

Težave z ethernetno povezavo:

• Preverite povezavo ethernetnega kabla med priklopno postajo in usmerjevalnikom/modemom.
• Preverite omrežne nastavitve v računalniku.
• Test the Ethernet cable with another device or directly connect your computer to the network.

NVMe SSD Not Detected:

• Ensure the SSD is correctly installed and secured within the dock (refer to "NVMe SSD Installation").
• Verify the SSD is an M Key PCIe NVMe/AHCI M.2 2280 type. SATA M.2 SSDs are not compatible.
• Check your computer's Disk Management (Windows) or Disk Utility (macOS) to see if the drive is detected but unformatted. Initialize and format if necessary.
• Ensure your computer's Thunderbolt 3 drivers are up to date.

Vzdrževanje

• Čiščenje: Za čiščenje zunanjosti polnilne postaje uporabite mehko, suho krpo. Izogibajte se tekočim čistilom ali topilom.
• Prezračevanje: Ensure the dock has adequate airflow around it to prevent overheating, especially when multiple devices are connected or NVMe SSDs are in use.
• Posodobitve vdelane programske opreme: Periodically check the SIIG website for any available firmware updates for the docking station to ensure optimal performance and compatibility.

Uradni videoposnetek izdelka

Garancija in podpora

SIIG provides a Manufacturer Warranty for its products. For technical support or warranty inquiries, please contact SIIG directly through their official channels. You can typically find contact information on the SIIG webspletnem mestu ali prek prodajalca, kjer je bil izdelek kupljen.

Za dodatno pomoč lahko obiščete SIIG Store on Amazon.