1. Uvod
Thank you for choosing HOFTRONIC Bari Dimmable LED Recessed Spotlights. This set of three stainless steel spotlights is designed for versatile indoor and outdoor use, featuring a GU10 5-watt 6000K dimmable LED light source and an IP65 waterproof rating. This manual provides essential information for safe installation, operation, and maintenance of your product.

Image 1.1: HOFTRONIC Bari Dimmable LED Recessed Spotlights in a modern bathroom setting.
2. Varnostne informacije
- Pred namestitvijo, vzdrževanjem ali zamenjavo žarnice vedno izklopite napajanje.
- Installation should be performed by a qualified electrician to ensure safety and compliance with local electrical codes.
- Zagotovite dovodni voltage (230 Volts) matches the product's requirements.
- Izdelka ne spreminjajte na noben način. Nepooblaščene spremembe lahko povzročijo električni udar, požar ali poškodbo izdelka.
- Avoid direct exposure to the light source for extended periods.
- This product is IP65 rated, making it suitable for both dry and humid environments, including bathrooms and outdoor covered areas.
3. Vsebina paketa
Paket vključuje:
- 3 x HOFTRONIC Bari Recessed Spotlights (Stainless Steel)
- 3 x GU10 5 Watt 6000K Dimmable LED Bulbs
4. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Številka modela | 5430367 |
| Znamka | HOFTRONIC |
| Mere izdelka (D x Š x V) | 8.5 x 8.5 x 8 cm |
| Teža predmeta | 5 kilogramov (za komplet) |
| Material | Aluminij |
| Barvna temperatura | 6000K (hladno bela) |
| Vir napajanja | AC/DC |
| Vrsta svetlobnega vira | LED (GU10) |
| Število svetlobnih virov | 3 |
| voltage | 230 volta |
| Wattage | 5 vatov na žarnico |
| Svetlobna učinkovitost | 450 lumnov na žarnico |
| Installation Depth (with bulb) | 80 mm |
| Cut-out Size (Saw Size) | Ø 70 mm |
| Zunanji premer | Ø 85 mm |
| Ocena IP | IP65 (odporno na vodo in prah) |

Image 4.1: IP65 Water and Dust Resistant Rating.

Image 4.2: High Performance and Dimmable GU10 LED Spot.
5. Nastavitev in namestitev
These spotlights are designed for easy 'Plug and Play' installation, requiring no specialized technical knowledge. However, for electrical safety, professional installation is recommended.
Koraki namestitve:
- Pripravite območje namestitve: Prepričajte se, da je napajanje območja namestitve izklopljeno z glavnim odklopnikom.
- Create the Cut-out: Using a suitable tool, create a circular cut-out in the ceiling or mounting surface with a diameter of Ø 70 mm.
- Povežite ožičenje: Open the junction box. Connect the main electrical wires to the terminals:
- L (v živo): Brown or Red wire
- N (nevtralno): Blue or Black wire
- E (Earth): Zelena in rumena žica
- Vstavite žarnico: Carefully insert the GU10 LED bulb into the spotlight fitting.
- Namestite reflektor: Fold the spring clips on the side of the spotlight upwards. Insert the spotlight into the Ø 70 mm cut-out. The springs will automatically secure the spotlight in place. The required installation depth with the bulb is 80 mm.
- Obnovi moč: Once all spotlights are securely installed, restore power at the main circuit breaker.

Image 5.1: Easy Installation with Spring Clips and Dimensions.

Image 5.2: Technical Diagram with Dimensions.

Image 5.3: Junction Box and GU10 Fitting Details.
6. Navodila za uporabo
Once installed and power is restored, the spotlights can be operated via your standard wall switch. To utilize the dimming function, ensure you have a compatible wall dimmer switch installed in your electrical system.
- Vklop/izklop: Use your wall switch to turn the spotlights on or off.
- Zatemnitev: If connected to a compatible dimmer, adjust the dimmer switch to achieve your desired light intensity.
- Interchangeable Bulb: The GU10 LED bulbs are interchangeable, allowing for easy replacement if needed.
7. Vzdrževanje
- Čiščenje: Ensure power is off before cleaning. Wipe the spotlight's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Zamenjava žarnice: To replace a GU10 bulb, ensure power is off. Gently twist the old bulb counter-clockwise to remove it. Insert the new GU10 bulb and twist clockwise until secure.
- Pregled: Občasno preverjajte morebitne znake poškodb ali ohlapnih priključkov. Če odkrijete kakršne koli težave, izključite napajanje in se posvetujte z usposobljenim električarjem.
8. Odpravljanje težav
If you encounter issues with your HOFTRONIC Bari spotlights, refer to the following common problems and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Žarnica se ne vklopi. | No power supply, loose wiring, faulty bulb. | Check circuit breaker. Ensure wiring connections are secure. Replace the GU10 bulb. |
| Luč nepričakovano utripa ali se zatemni. | Incompatible dimmer, loose bulb, unstable power. | Ensure your dimmer is LED compatible. Tighten the GU10 bulb. Consult an electrician for power supply issues. |
| Spotlight is hot to the touch. | Normal operation (LEDs generate some heat), poor ventilation. | Ensure adequate airflow around the fixture. If excessively hot, disconnect power and consult an electrician. |
9. Garancija in podpora
HOFTRONIC products are manufactured to high-quality standards. This product comes with a general warranty of up to 10 years, reflecting our commitment to durability and performance. For specific warranty terms, technical support, or service inquiries, please contact HOFTRONIC customer support through your retailer or the official HOFTRONIC webmesto.
Za garancijske zahtevke shranite dokazilo o nakupu.





