HOFTRONIC Esto 2-Light GU10 Black LED Spotlight

1. Uvod

Thank you for choosing the HOFTRONIC Esto 2-Light GU10 Black LED Spotlight. This product is designed for indoor use, providing adjustable lighting with two GU10 LED bulbs. Constructed from high-quality aluminum, this spotlight offers a modern aesthetic and reliable performance. Please read this manual carefully before installation and use to ensure safe and optimal operation.

Image: The HOFTRONIC Esto 2-Light GU10 Black LED Spotlight installed on a ceiling, providing illumination in a modern interior setting.

2. Varnostna navodila

• Always disconnect the main power supply before attempting any installation, maintenance, or bulb replacement.
• Installation should be performed by a qualified electrician to ensure compliance with local electrical codes and safety standards.
• This product is rated IP20 and is suitable for samo za notranjo uporabo. Do not expose to moisture or direct water.
• Zagotovite voltage supply matches the product's requirements (230V AC).
• Ne prekoračite največje wattage of 35 Watts per GU10 LED bulb.
• Zagotovite zadostno prezračevanje okoli svetilke, da preprečite pregrevanje.
• Ne prekrivajte svetilke z izolacijskim materialom, razen če je to posebej zasnovano za to.

3. Vsebina polja

Preden nadaljujete z namestitvijo, preverite, ali so vse komponente prisotne in nepoškodovane.

Image: Contents of the product box, including the spotlight fixture and mounting hardware.

• 1x HOFTRONIC Esto Double Black LED Ceiling Spot Fixture
• 1x imbus ključ
• 4x vijaki
• 4x podložke
• 4x stenski čepi

4. Nastavitev in namestitev

Follow these steps for safe and correct installation of your LED spotlight.

1. Pripravite se na namestitev: Prepričajte se, da je glavno napajanje območja namestitve izklopljeno z odklopnikom.
2. Označite vrtalne točke: Position the fixture on the ceiling at the desired location. Use the mounting holes on the base of the fixture to mark the drilling points. Refer to the diagram below for mounting dimensions.


Image: Detailed diagram of the spotlight's base with mounting hole dimensions (69mm x 69mm spacing, 4mm diameter holes, 13mm edge distance, max 12mm cable inlet).

3. Vrtanje lukenj: Na označenih mestih izvrtajte luknje. V izvrtane luknje vstavite priložene zidne vložke.
4. Povežite ožičenje: Open the terminal cover on the fixture. Carefully connect the electrical wires from your ceiling to the terminal block inside the fixture. Ensure correct connections: Live (L), Neutral (N), and Earth (⌀). The cable inlet supports a maximum diameter of 12mm.
5. Namestite napeljavo: Align the fixture's mounting holes with the wall plugs. Secure the fixture to the ceiling using the provided screws and washers. Do not overtighten.
6. Insert GU10 Bulbs: Vstavite dve LED žarnici GU10 (nista priloženi) vamp holders. Ensure they are securely twisted into place. Do not exceed 35 Watts per bulb.
7. Obnovi moč: Ko je namestitev končana in so vse povezave varne, ponovno vzpostavite glavno napajanje.

5. Navodila za uporabo

The HOFTRONIC Esto spotlight is designed for simple operation.

• Vklop/izklop: Control the spotlight using your standard wall light switch.
• Prilagodi smer svetlobe: The GU10 fittings are tiltable, allowing you to adjust the light direction by up to 30 degrees. Gently pivot the inner lamp holders to direct the light as desired.

Image: Illustration of the adjustable light direction, demonstrating the 30-degree tilt capability of the GU10 fittings.

6. Vzdrževanje

Regular maintenance will help prolong the life and appearance of your spotlight.

• Čiščenje: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior of the spotlight with a soft, dry, or slightly damp krpo. Ne uporabljajte abrazivnih čistil, topil ali agresivnih kemikalij, saj lahko poškodujejo površino.
• Zamenjava žarnice:
  1. Izklopite napajanje napeljave.
  2. Če je bila žarnica pred kratkim v uporabi, jo pustite, da se popolnoma ohladi.
  3. Gently push the GU10 bulb into its fitting and twist it counter-clockwise to remove.
  4. Insert a new GU10 LED bulb (max 35W) by pushing it into the fitting and twisting clockwise until secure.
  5. Obnovi moč.

7. Odpravljanje težav

If you encounter issues with your spotlight, refer to the following common problems and solutions:

• Lučka se ne prižge:
  • Preverite, ali je glavno napajanje vklopljeno.
  • Prepričajte se, da je stensko stikalo v položaju »vklopljeno«.
  • Verify that the GU10 bulbs are correctly inserted and not faulty.
  • Inspect wiring connections for looseness or damage (ensure power is off before inspection).
• Utripanje luči:
  • Ensure GU10 bulbs are fully seated in their sockets.
  • Try replacing the bulb to rule out a faulty bulb.
  • Check for loose wiring connections (with power off).
• Fixture feels hot:
  • Confirm that the installed GU10 bulbs do not exceed the maximum wattage 35W.
  • Ensure there is no obstruction preventing proper heat dissipation.

Če težave ne prenehajo, se obrnite na podporo strankam ali usposobljenega električarja.

8. Specifikacije

Image: Overall dimensions of the HOFTRONIC Esto 2-Light GU10 Black LED Spotlight.

9. Garancija

This HOFTRONIC product comes with a 3-letna garancija, reflecting our commitment to quality and durable construction. The robust aluminum enclosure ensures a long lifespan for your ceiling light.

Image: Warranty information, indicating a 3-year warranty and durable build quality.

10. Podpora

For further assistance, technical support, or warranty claims, please contact your retailer or the HOFTRONIC customer service department. Refer to your purchase documentation for contact details.