PELONIS 16'' Pedestal Remote Control Oscillating Stand Up Fan

Konec izdelkaview

The PELONIS 16-inch pedestal fan is engineered to provide powerful and efficient cooling for medium to large rooms. It features an upgraded high-performance motor and optimized blades for strong airflow while consuming less energy. Designed for user convenience, it includes a remote control, adjustable height, and a 7-hour auto shut-off timer. Its quiet operation ensures comfort in various settings, from bedrooms to offices. The fan also incorporates a stable base and built-in overheat protection for enhanced safety and durability.

Slika: spredaj view of the PELONIS 16-inch Pedestal Fan in white.

Postavitev in montaža

Follow these steps to assemble your PELONIS Pedestal Fan:

1. Pritrdite osnovo: Secure the main pole to the weighted base using the provided screw and washer. Ensure it is firmly tightened for stability.
2. Insert the Adjustable Pole: Slide the adjustable chrome pole into the main pole.
3. Namestitev motorne enote: Attach the fan motor unit to the top of the adjustable pole. Secure it with the locking screw.
4. Namestitev zadnje maske: Place the rear grille onto the motor unit, aligning the notches. Secure it with the plastic nut.
5. Pritrdite lopatice ventilatorja: Slide the fan blades onto the motor shaft. Ensure the blades are correctly oriented and secured with the spinner cap.
6. Namestitev sprednje maske: Place the front grille over the blades and align it with the rear grille. Secure the two grilles together using the clips around the edge.

Image: Visual guide for fan assembly, showing steps from base attachment to grille securing.

Umestitev: Position the fan on a flat, stable surface. Ensure adequate clearance around the fan for optimal airflow and oscillation. It is suitable for indoor use in living rooms, bedrooms, home offices, and dining rooms.

Navodila za uporabo

Your PELONIS fan can be operated using the control panel on the unit or the included remote control.

Nadzorna plošča in daljinski upravljalnik

Image: Close-up of the fan's control panel with buttons for speed, timer, and on/off.

• Napajanje (vklop/izklop): Press the ON/OFF button to turn the fan on or off.
• Nastavitve hitrosti: Press the SPEED button repeatedly to cycle through the 3 available speed settings (Low, Medium, High).
• Nihanje: The fan features 90° wide-angle oscillation. Activate or deactivate oscillation using the dedicated button on the control panel or remote.
• Nastavitev nagiba: Manually adjust the fan head's tilt to direct airflow precisely where needed. The tilt angle is approximately 24°.
• Časovnik: Use the TIMER button to set the auto shut-off timer for up to 7 hours. The fan will automatically turn off after the set duration.

Image: Diagram illustrating the 90° oscillation and tilt adjustment capabilities.

Nastavljiva višina

The fan's height can be adjusted from 3.5 ft to 4 ft (42-48 inches) to suit your personal comfort needs, whether you are at a desk, on a couch, or in bed. Loosen the height adjustment knob on the pole, extend or retract the pole to the desired height, and then tighten the knob securely.

Image: Two fans demonstrating the adjustable height from 3.5 ft to 4 ft.

Vzdrževanje

Redno čiščenje in vzdrževanje bosta zagotovila dolgo življenjsko dobo in optimalno delovanje vašega ventilatorja.

• Čiščenje: Disconnect the fan from the power source before cleaning. The fan grilles can be unclipped for easy access to the blades. Use a soft, damp cloth to wipe down the exterior surfaces. For the blades, gently wipe them to remove dust and debris. Do Not Wash the fan or immerse it in water.
• Shranjevanje: Ko ventilatorja dalj časa ne uporabljate, ga shranite na hladnem in suhem mestu, po možnosti v originalni embalaži, da ga zaščitite pred prahom in poškodbami.

Image: Illustration showing the fan blades being cleaned, emphasizing ease of maintenance.

Odpravljanje težav

If you encounter any issues with your PELONIS fan, please refer to the following common solutions:

• Ventilator se ne vklopi:
  • Prepričajte se, da je napajalni kabel varno priključen v delujočo električno vtičnico.
  • Check if the ON/OFF button has been pressed.
  • Verify that the timer function is not set to turn the fan off.
• Šibek pretok zraka:
  • Povečajte nastavitev hitrosti ventilatorja.
  • Prepričajte se, da so rešetke in lopatice ventilatorja čiste in brez nabranega prahu.
  • Adjust the tilt angle and oscillation to optimize air distribution.
• Nenavaden hrup:
  • Ensure the fan is placed on a stable, flat surface to prevent vibrations.
  • Check for any loose parts or obstructions within the fan grilles or around the blades.
  • While the fan is designed for quiet operation, some noise is normal, especially at higher speeds (Noise Level: 50 dB).
• Daljinski upravljalnik ne deluje:
  • Prepričajte se, da ima daljinski upravljalnik sveže baterije.
  • Point the remote directly at the fan's control panel.
  • Remove any obstructions between the remote and the fan.

For further assistance, please refer to the official user manual or contact PELONIS customer support.

Specifikacije

Garancija in podpora

For detailed warranty information and customer support, please refer to the official user manual or visit the PELONIS brand store.

• Uradni uporabniški priročnik: Prenesi PDF
• PELONIS Brand Store: Obišči trgovino

Note: Specific warranty terms and conditions may vary. Please consult the user manual or contact the manufacturer directly for the most accurate and up-to-date information.