EBTOOLS Open Face Motorcycle Helmet with UV Visor User Manual

1. Uvod

Thank you for choosing the EBTOOLS Open Face Motorcycle Helmet. This manual provides essential information for the proper setup, operation, maintenance, and safety of your helmet. Please read these instructions carefully before use to ensure your safety and the longevity of the product. Keep this manual for future reference.

2. Izdelek je končanview

The EBTOOLS Open Face Motorcycle Helmet is designed for comfort and protection during motorcycle and scooter rides. It features a lightweight, high-density construction, making it approximately 20% lighter than traditional helmets. The helmet includes UV-protective goggles to shield your eyes and face from harmful UV rays.

Ključne značilnosti:

• Lahek dizajn: Constructed from high-density materials for reduced weight and enhanced comfort.
• UV zaščita: Equipped with transparent UV goggles to protect eyes from sun damage.
• Udobna podloga: Soft interior lining ensures a comfortable fit for extended wear.
• Detachable Neck Scarf: A removable leather neck scarf provides versatility for different weather conditions.
• Vzdržljiva konstrukcija: Made from high-quality synthetic leather, polycarbonate (PC), and foam for durability.

3. Vsebina paketa

Po odprtju paketa preverite, ali so priloženi vsi naslednji elementi:

• 1 x EBTOOLS Open Face Motorcycle Helmet
• 1 x UV Goggles (transparent)
• 1 x Detachable Neck Scarf (leather)
• 1 x Helmet Visor

4. Specifikacije

5. Nastavitev

5.1. Helmet Fitting

Proper helmet fit is crucial for safety and comfort. Follow these steps to ensure a correct fit:

1. Izmerite obseg glave: Use a tape measure to find the circumference of your head, just above your eyebrows. This helmet is designed for head circumferences between 54-60 cm.
2. Preizkusite čelado: Place the helmet firmly on your head. It should feel snug all around, without excessive pressure points.
3. Preverite gibanje: With the chin strap unfastened, try to rotate the helmet from side to side and front to back. There should be minimal movement, and your skin should move with the helmet.
4. Pritrdite trak za brado: Secure the chin strap firmly. It should be tight enough so that the helmet cannot be pulled off your head, but not so tight as to cause discomfort.

5.2. Attaching the UV Goggles

The UV goggles are designed to be worn with the helmet. They typically feature an elastic strap that fits around the back of the helmet.

1. Position the goggles over your eyes.
2. Stretch the elastic strap around the back of the helmet, ensuring it sits securely in the designated groove or over the helmet's edge.
3. Adjust the strap for a snug fit that holds the goggles in place without causing discomfort.

5.3. Attaching/Detaching the Neck Scarf

The helmet includes a detachable leather neck scarf for added warmth and comfort. It attaches to the helmet via snaps or a similar fastening mechanism.

• Če želite priložiti: Align the snaps on the neck scarf with the corresponding fasteners on the helmet's interior or lower edge and press firmly until secured.
• Za odklop: Gently pull the snaps apart to remove the neck scarf.

6. Navodila za uporabo

Once the helmet is properly fitted and all accessories are attached, you are ready for use.

• Always ensure the chin strap is securely fastened before riding.
• Adjust the UV goggles for clear vision and optimal eye protection.
• Periodically check the fit of your helmet during long rides to ensure it remains snug and comfortable.
• Never ride with a loose or improperly fastened helmet.

7. Vzdrževanje in nega

Proper maintenance will extend the life of your helmet and ensure its protective capabilities.

7.1. Cleaning the Helmet Exterior

• Uporabite mehko, damp cloth with mild soap and water to clean the synthetic leather and polycarbonate shell.
• Avoid harsh chemicals, abrasive cleaners, or solvents, as these can damage the helmet's finish and materials.
• Dry the helmet thoroughly with a clean, soft cloth.

7.2. Cleaning the UV Goggles

• Gently wipe the goggle lenses with a soft, lint-free cloth and a specialized lens cleaner or mild soap and water.
• Do not use abrasive materials or paper towels, as they can scratch the lenses.
• Allow the goggles to air dry or gently pat dry with a microfiber cloth.

7.3. Cleaning the Interior Lining and Neck Scarf

• The interior foam lining can be spot cleaned with a damp krpo in blagim milom.
• If the neck scarf is detachable, it can be hand-washed with mild soap and air-dried. Ensure it is completely dry before reattaching.

7.4. Shranjevanje

• Čelado hranite na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
• Avoid storing the helmet near chemicals or solvents that could degrade its materials.

8. Varnostne informacije

Vaša varnost je najpomembnejša. Prosimo, upoštevajte naslednja varnostna navodila:

• Always wear a properly fitted and fastened helmet when riding a motorcycle or scooter.
• This helmet is designed for recreational use and may not meet all certification standards for competitive racing or specific regional regulations. Verify local requirements.
• Inspect your helmet regularly for any signs of damage, such as cracks, dents, or worn straps. Replace the helmet immediately if any damage is found.
• Never modify your helmet in any way, as this can compromise its protective integrity.
• Avoid exposing the helmet to extreme heat or cold, as this can affect its materials.
• Even minor impacts can compromise a helmet's protective capabilities. If your helmet sustains an impact, it should be replaced, even if visible damage is not apparent.

9. Odpravljanje težav

If you encounter any issues with your EBTOOLS helmet, consider the following:

• Čelada se zdi ohlapna: Re-check the chin strap adjustment. Ensure the helmet size is appropriate for your head circumference.
• Zarositev očal: Ensure goggles are clean. Consider anti-fog treatments if persistent.
• Neudobje med nošenjem: Re-evaluate the fit. Ensure no pressure points. The helmet should feel snug but not painful.
• Poškodovane komponente: If any part of the helmet (shell, strap, goggles) is damaged, discontinue use immediately and consider replacement.

10. Garancija in podpora

For warranty information or product support, please refer to the retailer's return policy or contact EBTOOLS customer service directly. Keep your proof of purchase for any warranty claims.

For further assistance, you may visit the EBTOOLS store on Amazon: EBTOOLS Store