1. Uvod
The FLAMMA FS06 Digital Preamp Pedal is a compact guitar effects pedal designed to provide a wide range of amplifier tones. It features 7 distinct preamp models, built-in cabinet simulation, and the ability to save custom presets. This manual provides detailed instructions for setting up, operating, and maintaining your FS06 pedal.
Image 1.1: The FLAMMA FS06 Digital Preamp Pedal.
2. Vsebina paketa
- FLAMMA FS06 Digitalni predojačevalnikamp Pedal
- Kratek vodnik
- FLAMMA Logo Sticker
Image 2.1: Contents of the FLAMMA FS06 package.
3. Nastavitev in povezave
3.1 Napajalnik
The FS06 pedal requires a 9V DC napajalnik with a current output of več kot 303mA. The power supply is not included. Ensure the correct polarity and sufficient current to prevent operational issues.
3.2 Connecting Your Pedal
The FS06 can be integrated into various audio setups:
- To a Guitar Amplifier's Power Amp: Connect the pedal's output to the power amp input of your guitar amplifier.
- Direct to a Power Ampdvigalo: Connect the pedal's output directly to a dedicated power amplifier.
- To an Audio Interface/Headphone Amplifier/Monitor Speaker/Mixer: Utilize the built-in cabinet simulation by connecting the pedal's output directly to these devices.
Image 3.1: Input jack of the FS06 pedal.
Image 3.2: Output jack of the FS06 pedal.
Image 3.3: FS06 connected to a mixer, utilizing cabinet simulation.
4. Delovanje
4.1 Nadzor nadview
The FS06 pedal features several knobs and a footswitch for tone shaping and preset management:
- BAS: Prilagodi nizkofrekvenčni odziv.
- MID: Adjusts the middle-frequency response.
- TRE (Treble): Prilagodi visokofrekvenčni odziv.
- STOPNJA: Nadzoruje celotno izhodno glasnost.
- DOBITE: Prilagodi količino overdrive/distortion.
- SAVE SELECT Button: Used to select preamp models and save presets.
- Nožno stikalo: Toggles the pedal on/off or switches between preamp channels, depending on the selected mode.
Image 4.1: Control knobs and their functions.
Image 4.2: Footswitch functionality.
4.2 Predamp Modeli
The FS06 offers 7 distinct preamp models, each designed to emulate classic and modern guitar amplifier tones. An LED indicator shows the currently selected effect.
| številka | Ime | Amp Model Basis |
|---|---|---|
| 1 | DELUXEBLUE | Based on Fender® Blues Deluxe |
| 2 | AC31 | Based on Vox® AC30 |
| 3 | CORAL REEF | Based on Two Rock® Coral |
| 4 | PLEX 50 | Na osnovi Marshall® Plexi 50 |
| 5 | BLUE EYE 100 | Based on Friedman® BE-100 |
| 6 | MB 5th Gen | Based on Mesa Boogie® MARK V |
| 7 | HVE 5151 | Based on EVH® 5150 |
Slika 4.3: Konecview of the 7 preamp modeli.
4.3 Shranjevanje prednastavitev
Vsak preamp model has two channels, allowing you to save a unique preset for each. To save your settings:
- Select your desired preamp model using the SAVE SELECT button.
- Adjust the BASS, MID, TRE, LEVEL, and GAIN knobs to your preferred settings.
- Press and hold the SAVE SELECT button until the LED indicator flashes, confirming the preset has been saved to the current channel.
This allows you to recall your customized tones instantly during performance or practice.
5. Vzdrževanje
To ensure the longevity and optimal performance of your FLAMMA FS06 pedal, follow these maintenance guidelines:
- Čiščenje: Za čiščenje zunanjosti pedala uporabite mehko, suho krpo. Izogibajte se abrazivnim čistilom ali topilom, ki lahko poškodujejo površino.
- Shranjevanje: Store the pedal in a dry environment, away from extreme temperatures, direct sunlight, and high humidity.
- Ravnanje: S pedalom ravnajte previdno. Pazite, da vam ne pade ali da ga ne izpostavljate močnim udarcem.
- moč: Always disconnect the power supply when the pedal is not in use for extended periods.
6. Odpravljanje težav
6.1 No Sound or Weak Signal
- Preverite napajanje: Ensure the pedal is connected to a 9V DC power supply with sufficient current (over 303mA). Insufficient current can lead to improper operation or no sound.
- Kabelske povezave: Verify all audio cables are securely connected to the input and output jacks.
- Volume/Level Settings: Check the LEVEL knob on the pedal and the volume settings on your amplifier ali zvočni vmesnik.
- Bypass način: If the pedal is in bypass mode, ensure your amplifier or other effects are functioning correctly.
6.2 Nepričakovano vedenje
- Cikel moči: Disconnect and reconnect the power supply to reset the pedal.
- Tovarniška ponastavitev: Refer to the official FLAMMA website or contact support for instructions on performing a factory reset if issues persist.
7. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Številka modela | FS06 |
| Teža predmeta | 10.5 unč (0.3 kilograma) |
| Dimenzije izdelka | 2.75 x 1.97 x 4.78 palcev (7 x 5 x 12.1 cm) |
| Vrsta materiala | Kovina |
| Vir napajanja | Električni na kabel |
| voltage | 9 voltov DC |
| Format signala | Digitalno |
| Strojni vmesnik | 1/4-palčni avdio |
| Prejamp Modeli | 7 |
| Saveable Presets | Yes (2 channels per preamp model) |
| Cabinet Simulation | Vgradna |
8. Garancija in podpora
For warranty information, technical support, or further inquiries, please visit the official FLAMMA webspletno mesto ali se obrnite neposredno na njihovo službo za stranke. Račun shranite kot dokazilo o nakupu za uveljavljanje garancije.
Uradnik FLAMMA Webspletno mesto: Visit the FLAMMA Store on Amazon