Warm Audio WA12 MKII Single Channel Microphone Preamplifier & Instrument DI User Manual

1. Uvod

Hvala za nakupasing the Warm Audio WA12 MKII Single Channel Microphone Preamplifier & Instrument DI. This unit is a completely discrete, high voltage, dual-transformer microphone preamplifier designed to enhance the tone of microphones and instruments. It offers high gain (+71dB), high headroom, and low noise, making it an ideal choice for a wide range of recording applications. This manual will guide you through the setup, operation, and maintenance of your WA12 MKII to ensure optimal performance and longevity.

2. Varnostna navodila

Please read and follow all safety instructions before operating this device. Keep this manual for future reference.

• vir energije: Only use the provided IEC cable and connect to a grounded power outlet. Ensure the voltage ustreza zahtevam enote.
• Voda in vlaga: Do not expose this unit to rain, moisture, or any liquids. Do not operate near water.
• Toplota: Naprave ne postavljajte v bližino virov toplote, kot so radiatorji, grelniki, štedilniki ali druge naprave, ki proizvajajo toploto.
• Prezračevanje: Zagotovite ustrezno prezračevanje. Ne blokirajte prezračevalnih odprtin.
• Servisiranje: Ne poskušajte servisirati te enote sami. Vsa servisna dela prepustite usposobljenemu serviserju. Servis je potreben, če je bila naprava kakorkoli poškodovana, na primer če je bil poškodovan napajalni kabel ali vtič, če je bila vanjo razlita tekočina ali če so vanjo padli predmeti, če je bila naprava izpostavljena dežju ali vlagi, če ne deluje normalno ali če je padla.
• Čiščenje: Čistite samo s suho krpo.

3. Vsebina paketa

Your Warm Audio WA12 MKII package should include the following items:

• Warm Audio WA12 MKII Unit
• IEC kabel
• Priročnik za lastnike

4. Izdelek je končanview

4.1 Kontrole sprednje plošče

Image: Front panel of the Warm Audio WA12 MKII, showing all controls and indicators.

• 1/4" Instrument DI Input: Connect high-impedance instruments such as guitars or basses here.
• HI-Z Button: Engages the high-impedance input for instruments, optimizing the signal path.
• 48V gumb: Activates +48V phantom power for condenser microphones. An indicator LED illuminates when active.
• Gumb PAD: Applies a -20dB attenuation to the input signal, useful for very loud sources to prevent clipping.
• POL (Polarity) Button: Inverts the polarity (phase) of the input signal. Useful for correcting phase issues when using multiple microphones.
• Gumb TON: Engages a tone-shaping circuit that alters the input impedance from 600 ohms to 150 ohms, providing a different sonic character.
• Gumb GAIN: Controls the input gain for the microphone or instrument signal, ranging from 29dB to 65dB.
• Izhodni gumb: Prilagodi splošno izhodno raven predamplifier.
• VU Meter LEDs: A series of LEDs indicating the output level, ranging from -20dB to +18dB, with indicators for 0dB, +08dB, and +18dB (clipping).
• Gumb za prižig: Turns the unit on or off. An indicator LED illuminates when the unit is powered on.

4.2 Priključki na zadnji plošči

The rear panel of the WA12 MKII provides the necessary connections for integrating the unit into your audio setup.

• XLR mikrofonski vhod: Connect your microphone via a standard XLR cable.
• Izhod XLR: Connect this output to your audio interface, mixer, or other recording equipment.
• Vhodna moč IEC: Connect the provided IEC cable here to power the unit.

5. Nastavitev

Follow these steps to set up your Warm Audio WA12 MKII:

1. Napajalni priključek: Connect the IEC power cable to the rear panel of the WA12 MKII and then to a grounded AC power outlet.
2. Priključek mikrofona: Connect your microphone to the XLR Microphone Input on the rear panel using a high-quality XLR cable.
3. Instrument Connection (Optional): If using an instrument, connect it to the 1/4" Instrument DI Input on the front panel. Ensure the HI-Z button is engaged.
4. Izhodna povezava: Connect the XLR Line Output on the rear panel to an input on your audio interface, mixer, or other recording device.
5. Vklop: Press the POWER button on the front panel. The power indicator LED will illuminate.
6. Začetne nastavitve: Set the GAIN and OUTPUT knobs to their minimum positions before connecting any audio sources to avoid sudden loud signals.

6. Navodila za uporabo

Operating the WA12 MKII involves adjusting its various controls to achieve the desired sound and level.

• Pridobitaging: Begin by slowly increasing the GAIN knob until the desired input level is achieved. Monitor the VU Meter LEDs to ensure the signal is not clipping (red +18dB LED). Adjust the OUTPUT knob to control the signal level sent to your recording device.
• Phantom Power (48V): If using a condenser microphone, press the 48V button to supply phantom power. Always connect the microphone before engaging phantom power and disengage it before disconnecting the microphone.
• Pad: For very loud sources (e.g., close-miked drums, loud guitar amps), engage the PAD button to reduce the input signal by 20dB, preventing distortion.
• Polarity (POL): Use the POL button to invert the phase of the input signal. This can be crucial when recording with multiple microphones to avoid phase cancellation issues.
• Ton: The TONE button changes the input impedance, offering a different sonic flavor. Experiment with this setting to find what best suits your microphone and source.
• HI-Z: When connecting an instrument directly to the 1/4" input, ensure the HI-Z button is engaged for proper impedance matching.

7. Vzdrževanje

Proper maintenance will ensure the longevity and optimal performance of your WA12 MKII.

• Čiščenje: Za čiščenje zunanjosti enote uporabite mehko, suho krpo. Izogibajte se abrazivnim čistilom ali topilom.
• Shranjevanje: Ko enote ne uporabljate, jo shranite na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
• Prezračevanje: Ensure the unit has adequate airflow around it during operation to prevent overheating.
• Skrb za kabel: Handle all cables with care. Avoid bending or crimping them excessively.

8. Odpravljanje težav

If you encounter any issues with your WA12 MKII, refer to the following common problems and solutions:

• Brez napajanja:
  • Check if the IEC cable is securely connected to the unit and the power outlet.
  • Prepričajte se, da vtičnica deluje.
  • Verify the POWER button is pressed in and its LED is illuminated.
• Ni zvoka:
  • Check all audio cable connections (microphone, instrument, output).
  • Ensure GAIN and OUTPUT knobs are not set to minimum.
  • If using a condenser mic, ensure 48V phantom power is engaged.
  • If using an instrument, ensure the HI-Z button is engaged.
  • Check the input/output settings on your audio interface or mixer.
• Popačen zvok:
  • Zmanjšajte gumb GAIN.
  • Engage the PAD button if the source is very loud.
  • Check the input level on your recording device to ensure it's not clipping.
• Brenčanje ali šum:
  • Prepričajte se, da so vsi kabli pravilno zaščiteni in priključeni.
  • Poskusite z drugo vtičnico.
  • Check for ground loops.
  • Ensure the POL (Polarity) button is set correctly if using multiple mics.

If the problem persists, contact Warm Audio support or a qualified technician.

9. Specifikacije

10. Informacije o garanciji

Warm Audio products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship for a period specified by Warm Audio at the time of purchase. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, please refer to the official Warm Audio webali se obrnite na njihovo podporo strankam.

11. Podpora

For technical support, product registration, or further inquiries, please visit the official Warm Audio webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Kontaktne podatke in odgovore na pogosta vprašanja najdete na njihovi strani za podporo.