3Dconnexion CadMouse Pro 3DX-700080 User Manual

1. Uvod

The 3Dconnexion CadMouse Pro 3DX-700080 is a purpose-built wired mouse designed for design and engineering professionals. It features advanced ergonomics and precise calibration to provide exceptional comfort and silent operation. This manual provides instructions for setting up, operating, maintaining, and troubleshooting your CadMouse Pro.

2. Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• 3Dconnexion CadMouse Pro 3DX-700080
• Vodnik za hitri začetek (če je priložen)
• Informacije o garanciji (če so vključene)

3. Nastavitev

3.1 Connecting the CadMouse Pro

The CadMouse Pro is a wired USB device. To connect it to your computer:

1. Poiščite razpoložljiva vrata USB na vašem računalniku.
2. Insert the USB connector of the CadMouse Pro into the USB port.
3. The operating system should automatically detect the device.

3.2 Namestitev gonilnika

For full functionality and customization of your CadMouse Pro, it is recommended to install the latest 3Dconnexion drivers and software.

• Visit the official 3Dconnexion webspletno mesto: www.3dconnexion.com/drivers
• Prenesite in namestite ustrezne gonilnike za vaš operacijski sistem.
• Za dokončanje namestitve sledite navodilom na zaslonu.

Slika 1: Zgornji del view of the CadMouse Pro, highlighting the primary buttons and scroll wheel.

4. Operating the CadMouse Pro

The CadMouse Pro is designed with specific features to enhance your CAD workflow.

4.1 Funkcije gumbov

• Levi klik na gumb: Standardna funkcija primarnega klika.
• Desni klik na gumb: Standardna funkcija sekundarnega klika.
• Middle Mouse Button: Dedicated button for CAD applications, often used for pan, zoom, or orbit functions.
• Kolesce za pomikanje: Used for scrolling documents and zooming in/out in CAD applications (Smart Mouse Wheel 2).
• QuickZoom Buttons: Two dedicated buttons located on the side for quick zoom in and zoom out functionality.
• Programabilni gumbi: Five buttons are programmable via the 3Dconnexion driver software for custom commands and macros.

Slika 2: stran view of the CadMouse Pro, illustrating the QuickZoom buttons.

4.2 Smart Mouse Wheel 2

The Smart Mouse Wheel 2 offers adaptive scrolling speed and precision. It can switch between click-to-click and hyper-fast scrolling modes depending on the application and user input.

4.3 QuickZoom

The dedicated QuickZoom buttons allow for instant zooming in and out of your CAD models or documents with a single press. This feature can be configured through the 3Dconnexion software.

5. Vzdrževanje

5.1 Čiščenje

To maintain optimal performance and hygiene, clean your CadMouse Pro regularly:

• Odklopite miško iz računalnika.
• Uporabite mehko krpo, ki ne pušča vlaken, dampočistite z vodo ali blago čistilno raztopino.
• Površino miške nežno obrišite. Izogibajte se prekomerni vlagi.
• Ne uporabljajte agresivnih kemikalij, abrazivnih čistil ali topil.
• Clean the optical sensor on the underside with a dry cotton swab if necessary.

Slika 3: Sprednja stran view of the CadMouse Pro, illustrating its ergonomic design.

5.2 Shranjevanje

Store the CadMouse Pro in a clean, dry environment away from extreme temperatures and direct sunlight when not in use for extended periods.

6. Odpravljanje težav

If you encounter issues with your CadMouse Pro, refer to the following common solutions:

• Miška se ne odziva:
  • Prepričajte se, da je kabel USB varno priključen tako na miško kot na računalnik.
  • Poskusite miško priključiti na drug USB vhod.
  • Znova zaženite računalnik.
• Gumbi ali drsno kolesce ne delujejo pravilno:
  • Verify that the 3Dconnexion drivers are installed and up to date.
  • Check the 3Dconnexion control panel for any custom settings that might be interfering.
  • Preizkusite miško na drugem računalniku, da izključite težavo, specifično za sistem.
• Premikanje kurzorja je neenakomerno ali nenatančno:
  • Očistite optični senzor na spodnji strani miške.
  • Ensure you are using the mouse on a suitable surface (e.g., a mouse pad, not highly reflective surfaces).
  • Check driver settings for sensor sensitivity.

Slika 4: Spodnja stran view of the CadMouse Pro, showing the optical sensor.

7. Specifikacije

8. Garancija in podpora

For detailed warranty information, product registration, and technical support, please visit the official 3Dconnexion webspletno mesto ali se obrnite na njihovo službo za stranke.

• Uradno Webspletno mesto: www.3dconnexion.com
• Stran za podporo: Glejte na webza posebne kontaktne podatke za podporo in pogosta vprašanja.