Sunity LED Strip Light Controller with APP, Music Sync and IR Remote (2 Ports) User Manual

Uvod

This manual provides comprehensive instructions for the Sunity LED Strip Light Controller. This device is designed to enhance your 4-pin 10mm RGB LED light strips by adding Bluetooth app control, music synchronization, and IR remote functionality. It supports two LED strip rolls simultaneously, offering versatile lighting options for indoor use.

Vsebina paketa

Po odprtju paketa preverite, ali so priloženi vsi naslednji elementi:

• 1 x Sunity 2-Port Bluetooth LED Controller
• 1 x IR Remote Control (with pre-installed CR2032 battery)
• 2 x 4-pin connectors (for LED strip connection)
• Navodila za uporabo

Image: The Sunity LED Strip Light Controller and its accessories as received in packaging.

Lastnosti izdelka

• Nadzor aplikacije Bluetooth: Seamlessly connect to the controller via Bluetooth for comprehensive control using a dedicated mobile application.
• Sinhronizacija glasbe: Lights can dance to the rhythm of music through the built-in sensitive microphone or your phone's microphone.
• IR daljinski upravljalnik: Provides convenient control over colors, modes, and brightness.
• Integrated Button Control: Three physical buttons on the receiver box for basic control (Mode, Speed/Brightness, Color).
• Široka združljivost: Designed for 4-pin 10mm 5050, 3528, 2835 RGB LED strip lights. Supports up to two LED strip rolls.
• Scheduled Timer: Set specific times for lights to turn on or off via the mobile application.

Slika: Podrobna view of the controller highlighting its compatibility, 16 available colors, music sync mode, and speed/brightness/on/off controls.

Nastavitev

1. Fizična povezava

1. Connect LED Strip(s): Ensure your LED strip is a 4-pin 10mm RGB type. Align the 4-pin connector from the controller with the pins on your LED strip. Make sure the arrows or polarity markings (+ to +) match to ensure correct color display. The controller supports up to two LED strips.
2. Priključite napajalnik: Plug the controller's power input into a compatible 12V or 24V power adapter (not included).
3. Activate IR Remote: Before first use, pull out the plastic insulation tab from the battery compartment of the IR remote control.

Image: Step-by-step guide for connecting the LED strip to the controller, pointing the remote to the IR receiver, connecting to a power adapter, and removing the remote's battery tab.

2. Namestitev aplikacije

The Sunity LED Strip Light Controller is compatible with the "Lotus Lantern" mobile application. Follow these steps to install and connect:

1. Prenesite aplikacijo: Scan the QR code below or search for "Lotus Lantern" in your device's app store (App Store for iOS, Google Play for Android).
2. Namestitev in odpiranje: Namestite aplikacijo in jo odprite.
3. Povezava Bluetooth: Ensure Bluetooth is enabled on your mobile device. The app should automatically detect and connect to the LED controller.
4. Podeli dovoljenja: Allow necessary permissions, such as location access, for the app to function correctly.

Image: QR code for downloading the "Lotus Lantern" application.

Image: Logos indicating app availability on both Apple App Store and Google Play Store.

Navodila za uporabo

1. Using the Mobile Application (Lotus Lantern)

Once connected, the app provides extensive control over your LED strips:

• Izbira barve: Use the color wheel or preset color options to choose your desired light color.
• Prilagoditev svetlosti: Adjust the brightness level to suit your environment.
• Dinamični načini: Select from various dynamic lighting modes (e.g., flashing, fading, jumping).
• Način sinhronizacije glasbe:
  • Vgrajeni mikrofon: The controller's built-in microphone detects ambient sound and music, making the lights react dynamically.
  • Mikrofon telefona: Use your phone's microphone to sync lights with music playing on your device.
• Scheduled Timer: Set specific times for the LED strips to automatically turn on or off.

Image: Various screenshots of the Lotus Lantern app, demonstrating color adjustment, style modes, music sync, microphone control, and scheduling features.

Image: An illustration of the music sync mode, showing LED lights changing colors in rhythm with music in a party setting.

Image: The LED controller with its built-in high-sensitivity microphone, alongside a phone displaying the app's mic mode interface.

Image: The app's scheduled timer feature, illustrating settings for sleeping time (lights off) and waking time (lights on).

2. Uporaba IR daljinskega upravljalnika

Point the IR remote directly at the controller's IR receiver for optimal response. The remote allows you to:

• Vklop/izklop luči.
• Select static colors (Red, Green, Blue, White, and various mixed colors).
• Prilagodite ravni svetlosti.
• Change dynamic modes and adjust their speed.
• Activate music sync modes.

Image: A living room setting demonstrating the "Three Control Ways" - via the phone app, IR remote, and the physical controller buttons, all managing LED strip lighting.

3. Using the Controller Buttons

The receiver box features three buttons for basic control:

• Gumb MODE: Kroži med različnimi načini dinamične osvetlitve.
• SPEED / BRIGHTNESS button: Short press to adjust speed in dynamic modes; long press to adjust brightness in static color modes.
• BARVNI gumb: Cycles through static color options.

Vzdrževanje

To ensure the longevity and optimal performance of your Sunity LED Strip Light Controller, follow these maintenance guidelines:

• Keep the controller and remote clean and dry. Avoid exposure to moisture or extreme temperatures.
• Use a soft, dry cloth to wipe down the surfaces. Do not use harsh chemicals or abrasive cleaners.
• Zagotovite ustrezno prezračevanje okoli krmilnika, da preprečite pregrevanje.
• If the IR remote stops responding, check and replace the CR2032 battery if necessary.

Odpravljanje težav

If you encounter issues with your Sunity LED Strip Light Controller, refer to the following common problems and solutions:

1. Luči se ne prižgejo:
   • Check all physical connections, ensuring the LED strip, controller, and power adapter are securely connected.
   • Verify that the power adapter is plugged into a working outlet and providing the correct voltage (12 V ali 24 V).
   • Ensure the plastic insulation tab has been removed from the IR remote battery compartment.
2. Incorrect Colors or Missing Colors:
   • Double-check the 4-pin connection between the LED strip and the controller. Ensure the polarity (e.g., arrow to arrow, + to +) is correctly aligned.
   • If colors are still incorrect, use the "Modify Pin Sequence" feature within the Lotus Lantern app. This allows you to adjust the RGB pin order to match your specific LED strip.
   

   Image: The "Modify Pin Sequence" interface within the Lotus Lantern app, used to correct color output if the LED strip's pin order differs from the controller's default.

3. IR Remote Not Responding:
   • Ensure the remote's plastic insulation tab is removed.
   • Zamenjajte baterijo CR2032 v daljinskem upravljalniku.
   • Point the remote directly at the IR receiver on the controller, ensuring no obstructions.
4. App Not Connecting via Bluetooth:
   • Preverite, ali je Bluetooth omogočen na vaši mobilni napravi.
   • Restart the Lotus Lantern app.
   • Znova zaženite mobilno napravo.
   • Prepričajte se, da je krmilnik vklopljen.
   • Check if the app has necessary permissions (e.g., location) granted on your phone.

Specifikacije

Garancija in podpora

For information regarding product warranty, please refer to the documentation provided with your purchase or visit the official Sunity website. For technical support or further assistance, please contact Sunity customer service through their official channels.