NOSILEC MU0018

MOUNTUP Full Motion TV Wall Mount

Model: MU0018

Uvod

Thank you for choosing the MOUNTUP Full Motion TV Wall Mount, model MU0018. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new TV wall mount. Designed for most 26-50 inch TVs, this mount offers full motion capabilities including swivel, tilt, and extension, allowing you to achieve optimal viewing angles. Please read this manual thoroughly before installation and keep it for future reference.

MOUNTUP Full Motion TV Wall Mount MU0018

Image: The MOUNTUP Full Motion TV Wall Mount MU0018, showcasing its articulating arm and VESA plate.

Varnostne informacije

Always ensure proper safety precautions are followed during installation. Failure to do so may result in property damage, serious injury, or death. If you are unsure about any part of the installation process, please consult a qualified professional.

  • Zmogljivost teže: This mount is designed for TVs up to 53 LBS (24 kg). Do not exceed this weight limit.
  • Združljivost z VESA: Ensure your TV's VESA pattern is between 75x75mm and 300x300mm.
  • Vrsta stene: This mount is suitable for single wood studs, concrete walls, and brick walls.
  • WARNING: DO NOT MOUNT ON DRYWALL ALONE. For concrete or brick walls, appropriate anchors (not included) are required. Contact MOUNTUP customer service if you need wall anchors.
  • Orodja: Za namestitev uporabite ustrezno orodje. Vedno nosite zaščitna očala.
Compatible Wall Types for TV Mount

Image: Illustration showing compatible wall types: single wood stud, concrete wall (requires anchors), and brick wall (requires anchors). A warning states not to mount on drywall alone.

Vsebina paketa

Pred začetkom namestitve preverite, ali so vse komponente prisotne in nepoškodovane.

  • Stenski nosilec za TV
  • Komplet montažne strojne opreme (različni vijaki, podložke, distančniki)
  • Navodila za uporabo

Specifikacije

FunkcijaSpecifikacija
ZnamkaMONTAŽA
Številka modelaMU0018
Združljive velikosti televizorjev26-50 palcev
Največja nosilnost53 LBS (24 kg)
Združljivost VESAMin. 75x75 mm do max. 300x300 mm
Zasučni kot+/-90°
Nagibni kot+5°/-15°
Prilagoditev ravni+/-3° (after installation)
Podaljšek od stene2.6 palca (zloženo) do 14.6 palca (izvlečeno)
MaterialLegirano jeklo

Nastavitev in namestitev

1. Check VESA Compatibility

Before installation, measure the horizontal and vertical distance between the mounting holes on the back of your TV. This is your TV's VESA pattern. The MU0018 mount supports VESA patterns from 75x75mm up to 300x300mm.

VESA Compatibility Chart

Image: Diagram illustrating how to measure VESA hole distance (horizontal x vertical) and a table of suitable VESA patterns for the MU0018 mount (Max 300x300mm).

VESA Extension for Larger TVs

Image: Comparison of VESA patterns, showing the MU0018's maximum 300x300mm VESA and noting that for VESA larger than 300x300mm, models MU0009 or MU0014 should be considered.

2. Wall Type Selection

Identify your wall type. The mount is designed for single wood studs. For concrete or brick walls, specialized anchors are required and are not included in the standard package. Do not attempt to mount on drywall alone without securing to a stud.

3. Montaža stenske plošče

Locate the center of your wood stud using a stud finder. Mark the drilling points for the wall plate. For concrete or brick walls, use a hammer drill and appropriate masonry bits to drill holes, then insert the correct anchors. Secure the wall plate firmly to the wall using the provided lag bolts.

4. Attaching Brackets to TV

Attach the TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are securely fastened and evenly aligned.

5. Obešanje televizorja

Carefully lift the TV with the attached brackets and hook them onto the wall plate. Secure the TV to the wall plate using the safety screws or locking mechanisms provided. Ensure the TV is level and stable.

Navodila za uporabo

The MOUNTUP MU0018 offers full motion capabilities for enhanced viewfleksibilnost.

Nastavitev vrtenja

The mount allows for a swivel angle of +/-90°. Gently push or pull the TV to the desired left or right position. The maximum swivel angle depends on your TV size and its distance from the wall.

TV Swivel Adjustment for Corner Installation

Image: A TV mounted in a corner, demonstrating the +/-90° swivel capability of the mount.

Nastavitev nagiba

Adjust the vertical tilt angle from +5° (tilt up) to -15° (tilt down) to reduce glare and optimize your viewing experience. Loosen the tilt knobs on the TV brackets, adjust to the desired angle, and then tighten the knobs to secure the position.

TV Tilting Adjustment to Reduce Glare

Image: An illustration showing a TV tilting down by 15 degrees and tilting up by 5 degrees, demonstrating the range of tilt adjustment to reduce glare.

Podaljšanje in umik

The articulating arm allows the TV to extend up to 14.6 inches (370mm) from the wall and retract to a slim 2.6 inches (65mm) for space-saving. Gently pull or push the TV to extend or retract the arm.

Podaljšanje in zlaganje nosilca za TV

Image: A TV mounted on a wall, showing the mount extended 14.6 inches and retracted 2.6 inches, illustrating its ability to fit narrow spaces.

Prilagoditev ravni

After installation, you can make minor level adjustments of +/-3° to ensure your TV is perfectly horizontal. This feature helps correct any slight misalignment during mounting.

TV Level Adjustment After Installation

Image: A TV mounted on a wall, with arrows indicating a +/-3 degree level adjustment, demonstrating how to fine-tune the TV's horizontal position after installation.

Vzdrževanje

Redno vzdrževanje zagotavlja dolgo življenjsko dobo in varno delovanje vašega stenskega nosilca za televizor.

  • Periodični pregledi: Občasno preverite vse vijake in povezave, da se prepričate, da so trdno priviti in varno pritrjeni.
  • Čiščenje: Wipe the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • Gibljivi deli: If the articulating arm feels stiff, a small amount of silicone-based lubricant can be applied to the joints.

Odpravljanje težav

TežavaMožen vzrokrešitev
Televizor po namestitvi ni poravnan.Slight misalignment during mounting.Use the +/-3° level adjustment feature to fine-tune the TV's horizontal position.
Nosilec se zdi ohlapen ali nestabilen.Screws are not fully tightened or incorrect wall anchors used.Re-check all mounting screws and wall connections. Ensure appropriate anchors were used for concrete/brick walls. Do not mount on drywall alone.
Nosilec za TV ni primeren.Napačen vzorec VESA ali pa teža televizorja presega nosilnost.Verify your TV's VESA pattern (75x75mm to 300x300mm) and weight (max 53 LBS). If larger, consider other MOUNTUP models like MU0009 or MU0014.

Garancija in podpora

MOUNTUP TV stands come with a full 3-year protection. For any questions regarding purchase or installation, please feel free to contact our friendly support team. We are dedicated to providing comprehensive and advanced technology solutions.

Storitev za stranke: Please refer to the contact information provided with your product packaging or visit the official MOUNTUP webstran za podporo.

© 2025 MOUNTUP. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.