Navodila za uporabo pametnega brezžičnega stenskega stikala MoesGo RF433 (WS-EU1-LB-N-MG)

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your MoesGo Smart RF433 WiFi Wall Switch. This smart switch is designed for convenient control of your lighting, offering multiple control methods including touch, app, voice, and RF433 remote.

Ključne značilnosti:

• No neutral wire required for installation.
• Supports 2.4GHz WiFi connectivity for Smart Life/Tuya App control.
• Compatible with Alexa and Google Home for hands-free voice control.
• RF433 frequency support for remote control (remote not included).
• Programmable timing schedules and countdowns.
• Relay status memory and backlight preferences.

Image 1.1: MoesGo Smart RF433 WiFi Wall Switch, showcasing its sleek design and "No neutral" indicator.

2. Varnostne informacije

WARNING: Electrical installation should only be performed by a qualified electrician. Always turn off power at the circuit breaker before installation or maintenance.

• Preden se lotite kakršnih koli del napeljave, se prepričajte, da je napajanje odklopljeno.
• This device is designed for 2.4GHz Wi-Fi networks only. It is not compatible with 5.0GHz Wi-Fi.
• A capacitor is required for proper operation and must be connected to both ends of the bulb.
• Only use with certified bulbs that have a rated power of 5W or higher.
• This switch is not designed for use as a 3-way switch.
• The capacitor may produce a faint humming sound during operation. This is normal.

3. Vsebina paketa

Prosimo, preverite paket za naslednje artikle:

• MoesGo Smart RF433 WiFi Wall Switch (1 unit)
• Capacitor (1 unit)
• Pritrdilni vijaki (2 kosi)
• Uporabniški priročnik (ta dokument)

4. Specifikacije

Image 4.1: Detailed dimensions of the MoesGo Smart Switch and a basic wiring diagram for single-wire installation with capacitor.

5. Namestitev in nastavitev

5.1 Kontrolni seznam pred namestitvijo

• Verify your Wi-Fi network is 2.4GHz. 5GHz networks are not supported.
• Ensure the bulbs connected to the switch have a rated power of 5W or higher.
• Confirm you are not attempting to install this as a 3-way switch.
• Have the included capacitor ready.

5.2 Navodila za ožičenje

1. Izklopite napajanje: Poiščite odklopnik in izklopite napajanje stikala, ki ga menjate. Preverite, ali je napajanje izklopljeno z uporabo merilnika glasnosti.tage tester.
2. Odstranite staro stikalo: Previdno odstranite obstoječe stensko stikalo iz stenske omarice.
3. Connect Capacitor: The included capacitor is essential for stable operation with no neutral wire. Connect the capacitor across the two terminals of the light bulb (in parallel with the load). This helps prevent flickering and ensures proper functionality.
4. Priključite pametno stikalo:
   • Connect the live wire (L) from your electrical box to the 'L IN' terminal on the MoesGo switch.
   • Connect the load wire (L1) going to your light fixture to the 'L OUT' terminal on the MoesGo switch.
   • Zagotovite, da so vse povezave varne.
5. Namestite stikalo: Gently push the wired switch into the wall box and secure it with the provided screws. Attach the glass panel.
6. Obnovi moč: Ponovno vklopite napajanje na odklopniku.

Image 5.1: Visual guide highlighting critical installation requirements: 2.4GHz Wi-Fi, minimum 5W bulb power, not for 3-way use, and no neutral wire needed.

Image 5.2: Illustration showing the capacitor and its importance for the MoesGo Smart Switch, indicating it should be connected to the bulb.

5.3 App Pairing (Smart Life/Tuya)

1. Prenesite aplikacijo: Prenesite aplikacijo »Smart Life« ali »Tuya Smart« iz trgovine z aplikacijami za vaš pametni telefon (iOS ali Android).
2. Registracija/Prijava: Odprite aplikacijo in registrirajte nov račun ali se prijavite z obstoječim.
3. Vstopite v način seznanjanja: On the MoesGo switch, press and hold the touch button for approximately 5-10 seconds until the indicator light starts blinking rapidly. This indicates it's in pairing mode.
4. Dodaj napravo: In the app, tap the "+" icon (usually in the top right corner) to add a device. Select "Switch (Wi-Fi)" or "Wall Switch".
5. Potrdi utripanje: V aplikaciji preverite, ali lučka na stikalu hitro utripa.
6. Vnesite podrobnosti o omrežju Wi-Fi: Vnesite ime in geslo za omrežje Wi-Fi 2.4 GHz.
7. Povežite se: The app will begin connecting to the switch. Once connected, the indicator light on the switch will stop blinking and remain solid.
8. Preimenuj napravo: Stikalo lahko v aplikaciji preimenujete za lažje prepoznavanje (npr. »Luč v dnevni sobi«).

6. Delovanje

The MoesGo Smart Switch offers multiple ways to control your lighting:

6.1 Upravljanje na dotik

Simply touch the designated area on the glass panel of the switch to turn the light ON or OFF. The touch control functions independently of app or voice commands.

Image 6.1: A hand touching the MoesGo Smart Switch, illustrating the touch control functionality.

6.2 App Control (Smart Life/Tuya)

Once paired with the Smart Life or Tuya Smart app, you can control your switch from anywhere with an internet connection.

• Daljinski VKLOP/IZKLOP: Tap the switch icon in the app to turn the light ON or OFF.
• Relay Status Settings: Access the switch settings in the app to configure the relay status after a power outage (ON/OFF/Remember last status). You can also adjust backlight preferences.
• Nadzor skupne rabe: Share control of the switch with family members or friends through the app, allowing multiple users to manage the device.
• Nadzor skupine: Create groups within the app to control multiple smart switches simultaneously.

Image 6.2: Screenshot of the Smart Life/Tuya app interface showing options for setting relay status and backlight preferences for the MoesGo Smart Switch.

6.3 Glasovno upravljanje (Alexa in Google Home)

Integrate your MoesGo Smart Switch with Amazon Alexa or Google Home for convenient hands-free voice control.

1. Poveži račun: In the Alexa or Google Home app, enable the "Smart Life" or "Tuya Smart" skill/service and link your account.
2. Odkrijte naprave: Ask Alexa or Google Home to discover new devices.
3. Glasovni ukazi: Uporabite ukaze, kot so:
   • "Alexa, vklopi [ime stikala]"
   • "Hej Google, izklopi [ime stikala]"

Image 6.3: Depiction of the MoesGo Smart Switch being controlled via voice commands using Amazon Alexa and Google Home devices.

6.4 Daljinski upravljalnik RF433

The switch supports RF433 frequency for remote control. An RF433 remote (not included) with 1527 encoding can be paired with the switch.

1. Enter RF Pairing Mode: In the Smart Life/Tuya app, navigate to the switch settings and find the "RF area" to enter pairing mode.
2. Združi daljinski upravljalnik: Press a button on your RF433 remote. Ensure a one-second delay between presses to avoid errors. The switch will confirm successful pairing.

6.5 Timing Schedules and Countdown

Utilize the Smart Life/Tuya app to set up automated schedules for your lights.

• Urniki: Program specific times for the light to turn ON or OFF daily or on selected days of the week.
• Odštevanje: Set a countdown timer for the light to turn OFF after a specified duration (e.g., 1, 5, 30 minutes, 1 hour).

Slika 6.4: Bivšiample of setting a timing schedule in the Smart Life/Tuya app, showing lights turning on at 7:00 AM and off at 10:00 PM.

7. Vzdrževanje

To maintain your MoesGo Smart Switch:

• Čiščenje: Gently wipe the glass panel with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Posodobitve vdelane programske opreme: Za optimalno delovanje in varnost redno preverjajte aplikacijo Smart Life/Tuya za razpoložljive posodobitve vdelane programske opreme.

8. Odpravljanje težav

• Stikalo se ne odziva:
  • Preverite, ali je odklopnik vklopljen.
  • Ensure the wiring is correct and secure.
  • Verify the capacitor is properly installed across the bulb terminals.
• Utripanje svetlobe:
  • This often indicates an issue with the capacitor installation or an incompatible bulb. Ensure the capacitor is correctly wired and the bulb meets the 5W minimum power requirement.
• Ni mogoče vzpostaviti povezave z Wi-Fi:
  • Preverite, ali je vaše omrežje Wi-Fi 2.4 GHz.
  • Ensure the switch is in pairing mode (rapidly blinking indicator light).
  • Preverite pravilnost gesla za Wi-Fi.
  • Move the switch closer to your Wi-Fi router during pairing.
• Faint Humming Sound:
  • A faint humming sound from the capacitor is normal for no-neutral switches. If the sound is loud or concerning, recheck the capacitor installation and bulb compatibility.
• RF433 Remote Pairing Issues:
  • Ensure the switch is in RF pairing mode via the app.
  • Press remote buttons with a one-second delay between presses.
  • Verify the remote uses 1527 encoding.

9. Garancija in podpora

For warranty information and technical support, please refer to the official MoesGo website or contact their customer service directly. Details are typically provided on the product packaging or the manufacturer's official online resources.