Moongiantgo Grain Mill Grinder Electric 300g Commercial Spice Grinder Instruction Manual

1. Pomembne varnostne informacije

Pred uporabo te naprave preberite vsa navodila. Neupoštevanje teh navodil lahko povzroči električni udar, požar ali resne poškodbe.

• Safety Buckle Device: The electric grinder is equipped with safety buckles on both sides of the lid. If the lid is opened during operation, the machine will immediately stop working to prevent injury.
• Zaščita pred preobremenitvijo: An upgraded overload protector is integrated. If the motor experiences an overload or overheats, the grinder will automatically stop to prevent motor burnout.
• Ensure the lid is securely closed and the safety device is engaged before starting the grinder.
• Do not operate the mill continuously for more than 3 minutes to prevent overheating. Allow the machine to cool down between uses.
• This appliance is designed for grinding DRIED/DEHYDRATED materials only. Do not use with wet, fresh, oily, or sticky materials.
• Keep hands and utensils out of the grinding chamber during operation.
• Podstavka motorja ne potapljajte v vodo ali katero koli drugo tekočino.

2. Izdelek je končanview

The Moongiantgo Electric Grain Mill Grinder is a versatile appliance designed for pulverizing various dry materials quickly and efficiently. Its robust stainless steel construction and powerful motor make it suitable for a range of grinding tasks.

Vključene komponente

• Electric Grain Grinder (x1)
• Spare Blade Set (x2)
• Carbon Brush Set (x1)
• Čopič za čiščenje (x1)
• Sieve (x1)

3. Nastavitev

1. Razpakiraj: Carefully remove all components from the packaging. Inspect the grinder for any signs of damage.
2. Umestitev: Place the grinder on a stable, flat, and dry surface. Ensure there is adequate ventilation around the unit.
3. Napajalni priključek: Zagotovite voltage of your power supply matches the grinder's requirements (110V for this model). Plug the power cord into a grounded electrical outlet.

4. Navodila za uporabo

4.1 Preparing for Grinding

1. Ensure the grinding chamber is clean and dry.
2. Add the desired amount of dry material into the grinding chamber. Do not overfill; the capacity is 300g (0.66lb).
3. Close the lid tightly. Ensure both safety buckles are engaged and you hear a clear click, indicating the induction switch is triggered. The machine will not operate if the lid is not properly secured.

4.2 Postopek mletja

1. Once the lid is securely closed, connect the power.
2. Rotate the timer switch to set the desired grinding time (0-5 minutes). The grinder will start automatically.
3. For general grains, 30 seconds to 3 minutes is typically sufficient to achieve a fine powder. Adjust grinding time based on the material and desired fineness.
4. To stop the operation immediately, turn the timer switch back to zero.

4.3 Grinding Results and Material Suitability

The grinder is effective for a wide range of dry materials, including grains, spices, coffee beans, and herbs. The fineness of the grind can be adjusted by varying the grinding time.

• If the initial grinding result is not fine enough, you can sieve out coarse particles and grind them again.
• Primerni materiali: Grains (wheat, corn, rice, soybeans), spices (pepper, cumin, dried chili), herbs, coffee beans, animal feed.
• Neprimerni materiali: Wet, fresh, oily, or sticky materials (e.g., fresh fruits, meat, nuts with high oil content, sugar). These materials can damage the grinder or lead to poor performance.

5. Vzdrževanje

5.1 Čiščenje

Regular cleaning ensures optimal performance and longevity of your grinder.

1. Pred čiščenjem vedno izključite mlinček iz električne vtičnice.
2. Use the provided cleaning brush to remove any residual powder from the inside of the grinding jar.
3. Wipe the inside of the jar and the exterior of the machine with a dry cloth.
4. Pomembno: The grinding jar is not detachable. Do not wash the grinding jar directly with water or rinse the motor base, as this can damage the electrical components.

5.2 Zamenjava rezila

If the blades become dull or damaged, they can be replaced using the spare blade sets provided.

1. Prepričajte se, da je mlinček izklopljen iz električnega omrežja.
2. Unscrew one of the screws on the blade assembly and lift it up to jam the short blade.
3. Use a wrench or socket (not included, but typically a standard tool) to loosen the locknut on the blades counter-clockwise.
4. Carefully remove the old blades. Exercise caution to avoid injury.
5. Install the new blades and tighten the locknut clockwise.

5.3 Zamenjava ogljikovih ščetk

Carbon brushes are wear-and-tear parts. If the grinder stops working due to an overload/overheat state and does not resume after cooling, replacing the carbon brushes may be necessary.

1. Prepričajte se, da je mlinček izklopljen iz električnega omrežja.
2. Locate the carbon brush covers on the sides of the motor housing.
3. Use a flattened tip screwdriver to loosen the nut on the carbon brush cover.
4. Carefully remove the old carbon brush.
5. Install a new carbon brush from the provided set and tighten the nut securely.
6. Replace both carbon brushes together for balanced performance.

6. Odpravljanje težav

Grinder Does Not Start

• Naprava za zaščito pokrova: If the machine does not start after being turned on, it may be because the induction switches inside the safety device are not triggered. Adjust the lid to ensure both rods are pushed completely into the buckle structures on both sides, leaving no space. Ensure you hear a clear click when closing the lid.
• Napajalni priključek: Preverite, ali je napajalni kabel varno priključen v delujočo električno vtičnico.
• Nastavitev časovnika: Ensure the timer switch is set to a grinding duration and not at zero.

Grinder Stops During Operation

• Overload/Overheat Protection: The grinder is equipped with an overload protector. If the motor is overloaded or overheats, it will automatically stop. Allow the machine to cool down for at least 10-15 minutes. After cooling, press the red overload protector button on the base to reset it, then resume operation.
• Lid Opened: If the lid is accidentally opened during operation, the safety device will immediately stop the machine. Close the lid securely to resume.

7. Specifikacije

8. Garancija in podpora

The Moongiantgo Grain Mill Grinder comes with a 1-letna garancija and free replacement parts.

• If any parts are found to be damaged upon receiving the product, please contact customer support for free replacements.
• For any questions or assistance needed during use, please email Moongiantgo customer support.

Za dodatno pomoč obiščite Moongiantgo Store on Amazon.