1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your EBTOOLS 52mm Digital Water Level Gauge. Designed for a wide range of applications including automobiles, marine vessels, engine groups, and construction machinery, this intelligent digital display gauge offers precise water level monitoring. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Varnostne informacije
- Always disconnect the vehicle's or equipment's power supply before attempting any installation or wiring.
- Ensure all wiring connections are secure and properly insulated to prevent short circuits and electrical hazards.
- Do not modify the gauge or its components. Unauthorized modifications may void the warranty and pose safety risks.
- Install the gauge in a location where it will not obstruct the driver's view or interfere with the safe operation of the vehicle/equipment.
- This product is designed for 12V/24V DC systems. Verify your system's voltage pred povezavo.
3. Izdelek je končanview
3.1 Lastnosti
- Jasen digitalni zaslon: Features a standard instrument industry-specific curved glass configuration for clear data display with anti-fog function.
- Red LED Backlight: Ensures visibility and normal operation during nighttime conditions.
- Široka uporaba: Suitable for automobiles, ships, engine groups, and construction machinery.
- Vzdržljiva konstrukcija: Made from high-quality plastic and stainless steel, resistant to aging for long-term use.
- Visoka natančnost: Utilizes a high-quality stepper motor for low power consumption, high precision, and stable performance.
- Robustna zasnova: IP67 waterproof and dustproof rating with an ultra-wide operating voltage (9-32V DC, up to 36V).
Slika 1: Spredaj view of the EBTOOLS Digital Water Level Gauge highlighting its clear display, red LED backlight, and 52mm mounting diameter.
3.2 Komponente
The EBTOOLS Digital Water Level Gauge kit typically includes:
- 1 x Water Level Gauge (J-YK00030)
- 1 x Navodila za uporabo
4. Nastavitev in namestitev
4.1 Montaža merilnika
- Choose a suitable location on your dashboard or control panel that allows for clear visibility and does not obstruct operation.
- Drill a mounting hole with a diameter of approximately 52mm (2.0 inches). Ensure the hole is clean and free of burrs.
- Insert the gauge into the drilled hole. Secure it from the back using the provided mounting bracket and nuts.
Slika 2: Nprample of the water level gauge installed in a vehicle dashboard.
4.2 Žične povezave
Refer to the wiring diagram (if provided with your product) and the back of the gauge for terminal identification. Ensure all connections are firm and correctly polarized.
- Napajanje: Connect the positive (+) terminal to a switched 12V/24V DC power source and the negative (-) terminal to a reliable ground. The gauge supports 9-32V DC.
- Vhod senzorja: Connect the water level sensor's signal output wire to the designated input terminal on the gauge. The gauge supports input signals of 0-190ohm (European standard) or 240-33ohm (American standard). Ensure your sensor matches the gauge's input signal type.
Slika 3: Zadaj view of the gauge showing the electrical connection terminals.
5. Navodila za uporabo
- Once properly installed and wired, turn on the power supply to the gauge.
- The digital display will illuminate, showing the current water level as a percentage (0-100%).
- The red LED backlight will activate, providing clear readability in low-light conditions or at night.
- Monitor the display for real-time water level information.
Figure 4: The gauge display illuminated with its red LED backlight for night operation.
6. Vzdrževanje
- Čiščenje: Uporabite mehko, damp cloth to clean the gauge's display and housing. Avoid abrasive cleaners or solvents that could damage the surface.
- Vodotesen/odporen na prah: The gauge has an IP67 rating, making it highly resistant to water and dust ingress. However, avoid prolonged submersion or high-pressure water jets directly on the gauge.
- Povezave: Periodically check all electrical connections to ensure they remain secure and free from corrosion.
Figure 5: The gauge demonstrating its IP67 waterproof and dustproof capabilities.
7. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Merilnik se ne vklopi. | Ni napajanja; napačna napeljava; pregorela varovalka. | Check power connections, ensure correct polarity, inspect fuses in the power line. |
| Incorrect water level reading. | Sensor malfunction; incorrect sensor type; wiring issue to sensor. | Verify sensor functionality, ensure sensor signal type matches gauge (0-190ohm or 240-33ohm), check sensor wiring. |
| Zaslon je zatemnjen ali utripa. | Nestabilno napajanje; ohlapna povezava. | Preverite napetost napajanjatage stability, tighten all electrical connections. |
8. Specifikacije
| Parameter | Vrednost |
|---|---|
| Številka modela | EBTOOLSmow3a0gesi (Type: J-YK00030) |
| Material | Plastika, nerjaveče jeklo, steklo |
| Premer luknje za pritrditev | Približno 52 mm (2.0 palca) |
| Delovna zvezatage | 9-32V DC (up to 36V) |
| Stopnja zaščite | IP67 (odporen na vodo in prah) |
| Razpon prikaza | 0-100 % |
| Vhodni signal | 0-190ohm (European Standard), 240-33ohm (American Standard) |
| Dimenzije (D x Š x V) | 6 x 6 x 6 cm |
| Teža | 70 gramov |
9. Informacije o garanciji
Specific warranty details for this product are not available in the provided information. Please refer to the product packaging or contact your retailer for warranty terms and conditions.
10. Informacije o podpori
Contact information for product support is not available in the provided data. For assistance, please contact the seller or refer to the official EBTOOLS webspletno mesto, če je na voljo.