Uvod
This manual provides essential information for the safe installation, operation, and maintenance of your Amazon Basics 40W Waterproof LED Outdoor Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
Varnostne informacije
- OPOZORILO: Nevarnost električnega udara. Pred namestitvijo ali servisiranjem izklopite varovalko ali odklopnik.
- Ta izdelek mora v skladu z veljavnim kodeksom namestitve namestiti oseba, ki je seznanjena s konstrukcijo in delovanjem izdelka ter s temi nevarnostmi.
- Ground the fixture properly to avoid potential electrical shock and to ensure reliable operation.
- Ne priključujte na zatemnilno stikalo.
- Ne glejte neposredno v LED svetlobni vir.
- Prepričajte se, da so vse povezave varne in ustrezno izolirane.
- Delovno temperaturno območje: od -20 °C do 40 °C (od -4 °F do 104 °F).
Vsebina paketa
- Amazon Basics 40W LED Outdoor Motion Sensor Security Light (1 unit)
- Pritrdilni material (vijaki, matice)
- Navodila za uporabo
Lastnosti izdelka
The Amazon Basics 40W LED Outdoor Motion Sensor Security Light is designed for reliable outdoor illumination with energy efficiency and adjustable features.
- Visoka Svetlost: 2 ultra-bright LED light heads produce up to 4000 lumens at 5000K daylight color temperature.
- Zaznavanje gibanja: Integrated motion sensor with up to 180° detection angle and a range of up to 49 feet.
- Nastavljiva oblika: LED heads are flexibly adjustable 350° horizontally and 60° vertically. The motion sensor is adjustable 180° horizontally and 90° vertically.
- Vzdržljiva konstrukcija: Aluminum design for effective heat dissipation and a bulb lifespan of up to 50,000 hours.
- Odporen na vremenske vplive: Waterproof rating ensures resilience against rain, sleet, or snow.
- Certificirano ETL: Meets safety and quality standards.
Slika: spredaj view of the Amazon Basics 40W LED Outdoor Motion Sensor Security Light, highlighting its two adjustable light heads and motion sensor.
Nastavitev
Follow these steps for proper installation of your security light. Professional installation is recommended if you are unfamiliar with electrical wiring.
- Pripravite se na namestitev:
- Turn off power at the circuit breaker or fuse box before beginning installation.
- Prepričajte se, da je površina za montažo stabilna in da lahko prenese težo naprave.
- Namestite napeljavo:
- Montažni nosilec pritrdite na priključno omarico s priloženimi vijaki.
- Connect the electrical wires: black to black (live), white to white (neutral), and green/bare copper to ground. Secure connections with wire nuts.
- Carefully push the wires into the junction box and secure the fixture to the mounting bracket.
- Prilagodite luči in senzor:
- Loosen the adjustment screws on the light heads and motion sensor.
- Position the light heads to cover the desired illumination area.
- Angle the motion sensor to optimize detection coverage, typically pointing slightly downwards.
- Tighten all adjustment screws securely.
- Obnovi moč: Ponovno vklopite napajanje na odklopniku.
Image: The security light installed on the exterior wall of a building, illuminating the area below.
Navodila za uporabo
The motion sensor has adjustable settings to customize its operation.
- Nastavitev ČASA: This dial controls how long the light remains on after motion is detected. Adjust from 5 seconds to 12 minutes.
- LUX (Daylight) Setting: Ta gumb določa raven svetlobe v okolju, pri kateri se senzor gibanja aktivira.
- Turn towards the "Sun" symbol for activation during both day and night.
- Turn towards the "Moon" symbol for activation only during nighttime or low-light conditions.
- Začetni vklop: Upon first power-up, the light may stay on for a short period (e.g., 5 minutes) as it calibrates. After this initial period, it will operate according to your chosen settings.
Vzdrževanje
- Čiščenje: Nastavek očistite z mehko damp krpo. Ne uporabljajte abrazivnih čistil ali topil. Pred čiščenjem se prepričajte, da je naprava izklopljena.
- Pregled: Periodically check for loose wiring or damaged components. Replace any damaged parts immediately.
- LED: The integrated LED bulbs are designed for long life and are not user-replaceable.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Luč se ne vklopi. | No power; faulty wiring; LUX setting too high (daylight). | Check circuit breaker; verify wiring connections; adjust LUX setting towards "Moon" symbol. |
| Svetloba neprekinjeno sveti. | Motion sensor continuously triggered; TIME setting too long; LUX setting too low (always active). | Adjust sensor angle to avoid constant triggers; reduce TIME setting; adjust LUX setting towards "Sun" symbol. |
| Svetloba utripa ali zatemni. | Ohlapna povezava ožičenja; nihanja električne energije. | Check and secure all wiring connections; consult an electrician if power fluctuations persist. |
| Doseg senzorja gibanja je slab. | Sensor obstructed; incorrect angle; environmental factors (temperature). | Clear obstructions; adjust sensor angle; consider environmental conditions. |
Specifikacije
| Številka modela | SM-4000-180-2H |
| Znamka | Osnove Amazona |
| Wattage | 40 W |
| Svetlost | 4000 lumnov |
| Barvna temperatura | Dnevna svetloba 5000K |
| Kot zaznavanja | Do 180° |
| Obseg zaznavanja | Do 49 čevljev |
| voltage | 120 volta |
| Material | Aluminij, plastika |
| Stopnja vodoodpornosti | Vodotesen |
| Certifikati | Certificirano ETL |
| Mere predmeta (D x Š x V) | 14.96 cm x 6.3 cm x 5.12 cm |
| Teža predmeta | 1.9 funta |
Garancija in podpora
For warranty information or technical support, please refer to the Amazon Basics product page or contact Amazon customer service. Keep your purchase receipt for warranty claims.