Uvod
This manual provides essential information for the safe and effective operation and maintenance of your DEWALT D36000S 10-Inch Wet Tile Saw with Stand. Please read and understand all instructions before use to ensure proper function and to prevent injury.
The DEWALT D36000S is a high-capacity wet tile saw designed for professional tile installation. It offers a 37-inch rip cut capacity (41 inches with plunge) and an 8-1/2 inch crosscut capacity, suitable for various tile sizes including 36x36 inch tiles ripped in half, 6-inch sills, and 8x48 inch planks at a 30% offset. The integrated water tray system helps contain mess, making it suitable for indoor use. The saw and stand are designed for portability, weighing approximately 91 lbs.
Varnostne informacije
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep children and bystanders away while operating a power tool.
Električna varnost
- Ensure the power cord is compatible with the power source and is properly grounded.
- Izogibajte se stiku telesa z ozemljenimi površinami, kot so cevi, radiatorji, štedilniki in hladilniki.
- Električnega orodja ne izpostavljajte dežju ali mokrim pogojem. Vdor vode v električno orodje poveča nevarnost električnega udara.
- Ne zlorabljajte kabla. Nikoli ne uporabljajte kabla za prenašanje, vlečenje ali izklapljanje električnega orodja. Kabel hranite stran od vročine, olja, ostrih robov ali gibljivih delov.
Osebna varnost
- Vedno nosite zaščito za oči (zaščitna očala ali zaščitna očala) in zaščito za sluh.
- Nosite primerna oblačila. Ne nosite ohlapnih oblačil ali nakita. Lase in oblačila naj bodo stran od gibljivih delov.
- Bodite pozorni, pazite, kaj počnete, in pri delu z električnim orodjem uporabljajte zdrav razum.
- Ne pretiravajte. Ves čas ohranjajte pravilno nogo in ravnotežje.
Saw Specific Safety
- Always ensure the blade guard is in place and functioning correctly.
- Use only blades recommended for wet cutting of tile and masonry.
- Never attempt to cut material freehand. Always use the rip fence or miter guide.
- Ensure the water pump is submerged and functioning to provide adequate cooling and dust suppression during operation.
- Disconnect power before changing blades or performing any maintenance.
Komponente
The DEWALT D36000S Wet Tile Saw includes the following components:
- D36000 Wet Tile Saw Unit
- D24001 Stand
- DW4764 Porcelain Tile Blade
- Potopna vodna črpalka
- Vodna posoda
- Side Water Trays
- Rear Water Trays
- Cutting Cart Side Extension
- Angle/Rip Guide
- Ključ za rezilo
- Hex ključ
Nastavitev
Pravilna nastavitev je ključnega pomena za varno in natančno delovanje.
1. Sestavljanje stojala
Unfold the D24001 stand and ensure all locking mechanisms are securely engaged. Place the stand on a firm, level surface.
2. Mount the Saw to the Stand
Carefully lift the D36000 saw unit and align it with the mounting points on the stand. Secure the saw to the stand using the provided hardware. Ensure the saw is stable and does not wobble.
Figure 1: Fully assembled DEWALT D36000S Wet Tile Saw on its stand.
3. Install Water Trays and Pump
Attach the water pan, side water trays, and rear water trays to the saw unit. Ensure they are properly seated to prevent leaks. Place the submersible pump into the water pan and connect its hose to the saw's water delivery system.
Slika 2: Od zgoraj navzdol view of the saw, illustrating the placement of the water trays for effective water management.
4. Install Blade
Ensure the saw is unplugged. Use the blade wrench to loosen the arbor nut. Install the DW4764 Porcelain Tile Blade, ensuring the rotation direction matches the arrow on the saw. Tighten the arbor nut securely.
5. Napolnite rezervoar za vodo
Fill the water pan with clean water until the submersible pump is fully submerged and the water level is adequate for operation. Regularly check and refill the water during use.
Video 1: Overview of the DEWALT D36000S Wet Tile Saw with Stand, demonstrating its features and setup.
Navodila za uporabo
Familiarize yourself with the saw's controls and cutting capabilities before beginning work.
1. Adjusting for Cuts
- Razrezani kosi: For straight cuts along the length of the tile, use the rip fence. The saw offers a 37-inch rip cut capacity, extendable to 41 inches with plunge cuts. The 18-inch cutting clearance to the left of the blade allows for ripping 36x36 inch tiles in half.
- Prečni rezi: For cuts across the width of the tile, use the miter guide. The saw has an 8-1/2 inch crosscut capacity, ideal for 6-inch sills and 8x48 inch planks at a 30% offset.
- Rezi pod kotom: Adjust the miter guide for angled cuts. The saw supports various miter angles.
Figure 3: Detail of the miter adjustment lever, allowing for precise angle settings for various cuts.
2. Izvedba reza
- Place the tile firmly against the rip fence or miter guide on the cutting cart.
- Ensure the water pump is running and water is flowing to the blade.
- Turn on the saw. Allow the blade to reach full speed before beginning the cut.
- Slowly and steadily push the cutting cart and tile through the blade. Do not force the cut.
- Maintain a firm grip on the tile throughout the cutting process.
- Once the cut is complete, turn off the saw and wait for the blade to stop before removing the tile.
Figure 4: The cutting cart lock mechanism, ensuring stability during precise cuts.
Vzdrževanje
Regular maintenance ensures the longevity and performance of your tile saw.
1. Čiščenje
- After each use, disconnect the saw from power.
- Drain the water pan using the easy-to-remove plug.
- Rinse all water trays, the cutting cart, and the blade area to remove tile slurry and debris.
- Clean the submersible pump to prevent clogging.
- Wipe down all surfaces to prevent rust and buildup.
2. Nega rezil
- Inspect the blade for wear, damage, or dullness before each use.
- Replace worn or damaged blades promptly. Refer to the 'Install Blade' section for replacement instructions.
- Store blades properly to prevent damage.
3. Splošni pregled
- Občasno preverite tesnost vseh pritrdilnih elementov.
- Preverite, ali je na napajalnem kablu znake poškodb.
- Ensure the cutting cart slides smoothly. Lubricate if necessary with a suitable lubricant.
Figure 5: Integrated storage for accessories like wrenches and the miter guide, located beneath the saw for convenience.
Odpravljanje težav
Ta razdelek obravnava pogoste težave, na katere lahko naletite.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Žaga se ne zažene | Ni napajanja, okvarjeno stikalo, sproženo varovalko | Preverite priključek za napajanje, preizkusite vtičnico, ponastavite odklopnik, če je stikalo okvarjeno, se obrnite na servis. |
| Rezilo ne reže učinkovito ali kruši ploščice | Dull or incorrect blade, insufficient water flow, feeding too fast | Replace blade, ensure pump is working and water is flowing, reduce feed rate. |
| Water not flowing to blade | Clogged pump, kinked hose, low water level | Clean pump, check hose for obstructions, refill water pan. |
| Netočni rezi | Loose fence/guide, worn blade, unstable setup | Tighten fence/guide, replace blade, ensure saw and stand are stable. |
Specifikacije
Key technical specifications for the DEWALT D36000S Wet Tile Saw:
- Številka modela: D36000S
- vir energije: Električni na kabel
- Motor: 15 Amp, 1220 MWO
- voltage: 120 V
- Wattage: 1800 vatov
- Hitrost: 4200 RPM
- Premer rezila: 10 palcev
- Rip Cut Capacity: 37 inches (41 inches with plunge)
- Prečna zmogljivost: 8-1/2 palcev
- Natančnost: 1/32 inch over 30 inches
- Teža artikla: 91 funta
- Mere predmeta (D x Š x V): 36 cm D x 31 cm Š x 28.75 cm V
- Material rezila: Stainless Steel (for included blade)
- Priporočilo za površino: Porcelan
- Posebne lastnosti: Brake, Integrated storage, Water tray system
- Certificiranje: UL
Garancija in podpora
Za informacije o garanciji, servisu ali tehnični podpori se obrnite na uradnega prodajalca DEWALT. webali se obrnite neposredno na službo za stranke DEWALT. Račun shranite kot dokazilo o nakupu za uveljavljanje garancije.