BEEPER Scolopax 4.0

BEEPER Beretti Scolopax 4.0 Radio Collar Instruction Manual

1. Uvod

The BEEPER Beretti Scolopax 4.0 is an advanced radio collar designed for hunting dogs, specifically optimized for woodcock hunting. This device features unique sound profiles, including a 'bell' sound that does not disturb wildlife, and is engineered for high audibility over long distances. Its robust construction ensures durability and resistance to environmental factors, making it a reliable tool for hunters.

The Scolopax 4.0 incorporates baritone sounds with a very low frequency and high volume, allowing sounds to propagate effectively through dense vegetation over greater distances compared to conventional beepers. It offers 32 distinct sounds for both search and point phases, including specialized sounds like the 'falcon' and 'mushroom' that are less likely to disturb woodcocks.

2. Vsebina paketa

Prosimo, preverite paket, da se prepričate, da so prisotni vsi elementi:

  • Beeper Scolopax 4.0 Unit
  • Orange Collar
  • Gold Seal/Gasket
  • 3 x AA baterije
  • Izvijač
  • Magnetni ključ
  • Knjižica z navodili
  • Product Carrying Case
Black carrying case for the Beeper Scolopax 4.0

Image: The durable black carrying case provided with the Beeper Scolopax 4.0, designed for protection and transport.

3. Nastavitev

3.1 Namestitev baterije

  1. Locate the battery compartment on the beeper unit. The unit features a secure, waterproof cap closure system.
  2. Using the provided screwdriver, carefully open the battery compartment.
  3. Vstavite 3 baterije AA in pazite na pravilno polarnost (+/-), kot je označeno v predalu.
  4. Close the battery compartment securely with the cap and tighten with the screwdriver to maintain its waterproof seal.
Beeper unit with AA batteries being installed

Image: The Beeper Scolopax 4.0 unit with its battery compartment open, showing three AA batteries ready for installation. The unit is black with a red accent.

3.2 Attaching to Collar

Thread the orange collar through the designated loops on the beeper unit. Ensure the unit is securely fastened to the collar and positioned comfortably for your dog.

4. Navodila za uporabo

4.1 Vklop/izklop

The Beeper Scolopax 4.0 can be powered on or off using the provided magnetic key. Simply pass the magnetic key over the designated area on the beeper unit to activate or deactivate it. Alternatively, inserting the batteries will power on the device.

4.2 Zvočni načini in nastavitve

The device offers 32 distinct sounds: 16 for the dog's search phase and 16 for when the dog is on point (stop). These include unique 'bell' and 'mushroom' sounds designed not to disturb game.

  • Adjusting Pause Time: The pause time between sounds during the dog's search phase can be adjusted from 4 to 60 seconds. Use the internal settings (accessible with the screwdriver) to set your preferred interval.
  • Silent Pointing Trigger: The beeper features a silent trigger for when the dog goes on point, ensuring minimal disturbance to the game.
  • Delayed Sound on Point: An internal setting allows you to set a delay for the sound to activate once the dog is on point. This can be adjusted using the screwdriver.
Beeper Scolopax 4.0 unit and remote control

Image: The Beeper Scolopax 4.0 unit shown alongside its remote control, illustrating the system's components for operation.

4.3 Battery Status Signal

Upon power-on, the device emits different sounds to indicate the current battery status, allowing you to monitor battery life effectively.

5. Vzdrževanje

5.1 Čiščenje

Regularly clean the beeper unit with a damp cloth to remove dirt and debris. Avoid using harsh chemicals or abrasive materials that could damage the casing ali tesnila.

5.2 Zamenjava baterije

When the battery status signal indicates low power, replace all three AA batteries simultaneously. Always use fresh, high-quality AA batteries for optimal performance and battery life.

5.3 Vodoodporno tesnilo

The beeper unit is designed with a waterproof cap closure. Ensure this cap is always securely fastened after battery changes or adjustments to maintain its water resistance. Periodically inspect the gold seal/gasket for any signs of wear or damage and replace if necessary.

6. Odpravljanje težav

  • Ni zvoka:
    • Check if the unit is powered on using the magnetic key.
    • Prepričajte se, da so baterije pravilno nameščene in niso izpraznjene.
  • Šibek zvok:
    • Zamenjajte baterije AA z novimi.
  • Beeper Not Responding:
    • Verify the magnetic key is functioning correctly.
    • Preverite priključke akumulatorja in se prepričajte, da so varni.

7. Specifikacije

FunkcijaSpecifikacija
ModelScolopax 4.0
ZnamkaPIPALO
ProizvajalecBeretti
Dimensions (Beeper Unit)Ø 6 x 9.5 cm
Vir napajanja3 x AA baterije
Število zvokov32 (16 search, 16 point)
Adjustable Pause Time4 to 60 seconds (during search)
VodoodpornostWaterproof cap closure system
Material ovratnikaUsnje
Teža izdelkaNi določeno

8. Garancija in podpora

8.1 Garancija

The BEEPER Beretti Scolopax 4.0 comes with a 24-mesečna garancija od datuma nakupa. Ta garancija krije proizvodne napake pri normalni uporabi. Za uveljavljanje garancije shranite dokazilo o nakupu.

8.2 Podpora

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or the manufacturer directly. Refer to the contact information provided in your product packaging or on the official BEEPER webmesto.

© 2023 BEEPER. Vse pravice pridržane.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.