RICOO Monitor Stand TS4011 Instruction Manual

1. Izdelek je končanview

The RICOO TS4011 Monitor Stand is designed to provide an ergonomic and space-saving solution for your display. This stand offers a wide range of adjustments including rotation, swivel, tilt, and height, ensuring optimal viewing comfort for monitors between 17 and 32 inches and up to 7 kg in weight.

RICOO TS4011 Monitor Stand in a modern office setting

Image: The RICOO TS4011 Monitor Stand, black, supporting a monitor on a light wooden desk.

2. Varnostne informacije

Please read all instructions carefully before assembly and use. Keep this manual for future reference. Failure to follow these instructions may result in property damage, serious injury, or death.

Pred sestavljanjem se prepričajte, da so vse komponente prisotne in nepoškodovane. Ne uporabljajte poškodovanih delov.
Ne prekoračite največje dovoljene nosilnosti 7 kg (15.4 lbs).
Ensure your monitor's VESA mounting pattern (75x75mm or 100x100mm) is compatible with this stand.
Ta izdelek je namenjen samo za uporabo v zaprtih prostorih.
Med sestavljanjem naj otroci in hišni ljubljenčki ne bodo v bližini. Majhni deli lahko predstavljajo nevarnost zadušitve.
Always use appropriate tools and follow the assembly steps in order.
Če imate kakršne koli dvome glede namestitve, se posvetujte s usposobljenim strokovnjakom.

3. Vsebina paketa

Preverite, ali so v vašem paketu priloženi vsi spodaj navedeni elementi:

Monitor Desk Stand (Main Unit)
Mounting Kit (various screws, washers, spacers, Allen keys)
Navodila za uporabo

4. Navodila za nastavitev

Follow these steps to assemble and install your RICOO TS4011 Monitor Stand.

4.1. Sestavite podstavek

Attach the main support pole to the base plate using the provided screws and tools. Ensure all connections are secure.

Diagram showing base dimensions and assembly points

Image: Diagram illustrating the base dimensions and attachment points for the stand pole.

4.2. Pritrdite ploščo VESA na monitor

Carefully place your monitor face down on a soft, clean surface. Align the VESA mounting plate from the stand with the mounting holes on the back of your monitor. Use the appropriate screws, washers, and spacers from the mounting kit. Tighten securely, but do not overtighten.

Diagram showing VESA mounting points on a monitor

Image: Diagram indicating VESA mounting hole measurements (A and B) on the back of a monitor.

Illustration of VESA plate attached to monitor

Image: Illustration showing the VESA mounting plate securely attached to the back of a monitor.

4.3. Mount Monitor to Stand

With the VESA plate attached to your monitor, carefully lift the monitor and slide the VESA plate onto the mounting head of the stand. Ensure it clicks into place or is secured with any locking mechanisms. Double-check that the monitor is firmly attached before releasing.

Zadaj view of a monitor mounted on the RICOO TS4011 stand

Slika: Zadaj view of a monitor securely mounted on the RICOO TS4011 stand, showcasing the VESA attachment.

4.4. Upravljanje kablov

Utilize the integrated cable management clips on the stand pole to route your monitor cables neatly. This helps to maintain a tidy workspace and prevents cables from snagging during adjustments.

Close-up of cable management clips on the monitor stand

Slika: Bližnji posnetek view of the cable management clips on the stand pole, with cables routed through them for an organized setup.

5. Navodila za uporabo in nastavitve

The RICOO TS4011 Monitor Stand offers various adjustment options to customize your viewizkušnje.

Diagram showing tilt, swivel, rotation, and height adjustments

Image: Visual representation of the stand's adjustable features: 45-degree swivel, 360-degree rotation, 20-degree tilt, and 110mm height adjustment range.

5.1. Nastavitev višine

To adjust the monitor height, gently push the monitor upwards to its maximum height. This will release the locking mechanism, allowing you to then lower it to your desired position. To raise the monitor, simply lift it. The stand features a gas spring mechanism for smooth height transitions within its 110mm range.

5.2. Nastavitev nagiba

The monitor can be tilted +/-20 degrees vertically. Loosen the tilt screw (if applicable, refer to diagram) on the VESA plate, adjust the monitor to your preferred angle, and then retighten the screw to secure it.

5.3. Nastavitev vrtenja

The monitor can be swiveled +/-45 degrees horizontally. Gently rotate the monitor to the left or right to achieve your desired viewvhodni kot.

5.4. Nastavitev vrtenja

The VESA plate allows for a full 360-degree rotation, enabling you to switch between landscape and portrait orientations. Simply rotate the monitor to the desired orientation.

6. Vzdrževanje

To ensure the longevity and proper function of your monitor stand, follow these maintenance guidelines:

Čiščenje: Stojalo obrišite z mehko krpoamp krpo. Izogibajte se abrazivnim čistilom ali topilom, ki bi lahko poškodovala površino.
Periodični pregledi: Redno preverjajte vse vijake in povezave, da se prepričate, da so trdno priviti. Po potrebi jih ponovno privijte.
Mazanje: The gas spring mechanism is maintenance-free. Do not attempt to lubricate internal components.

7. Odpravljanje težav

If you encounter issues with your monitor stand, refer to the following common problems and solutions:

Težava	Možen vzrok	rešitev
Monitor sags or does not hold position.	Screws are loose; monitor weight exceeds capacity; tilt mechanism not tightened.	Check and tighten all mounting screws. Ensure monitor weight is within the 7kg limit. Tighten the tilt adjustment screw.
Težave pri nastavljanju višine.	Gas spring mechanism needs to be reset or is stiff.	To lower the monitor, first push it up to its maximum height to release the mechanism, then gently push down to the desired position. Ensure the monitor is within the specified weight range for optimal gas spring function.
Monitor is not level.	Uneven installation or VESA plate not perfectly aligned.	Check the VESA plate attachment to the monitor and the stand. Adjust the monitor's rotation slightly if possible to correct the level.
Stojalo se zdi nestabilno.	Base not fully tightened; stand placed on an uneven surface.	Ensure the base screws are fully tightened. Place the stand on a flat, stable surface.

8. Specifikacije izdelka

Detailed specifications for the RICOO TS4011 Monitor Stand:

Model: TS4011
Združljive velikosti zaslona: 17 - 32 palcev (43 - 81 cm)
Največja nosilnost: 7 kg (15.4 lbs)
Združljivost z VESA: 75x75 mm, 100x100 mm
Material: Legirano jeklo, aluminij, železo, kovina, plastika
barva: Črna
Vrsta gibanja: Articulating, Swiveling, Tilting, Rotating, Height Adjustable
Kot nagiba: +/- 20 stopinj
Kot vrtenja: +/- 45 stopinj
Vrtenje: 360 degrees (for VESA plate)
Območje nastavitve višine: Approximately 110 mm (from 352mm to 462mm, based on diagram)
Teža artikla: 3.6 kg (7.9 lbs)
Vrsta pritrditve: Table Mount (Freestanding Base)

Image showing maximum weight capacity, screen size range, and VESA compatibility

Image: Visual summary of key specifications: Max 7kg load, 13"-32" screen size compatibility, and VESA 75x75 / 100x100 standards.

Technical diagram of RICOO TS4011 monitor stand with dimensions

Image: Detailed technical diagram of the TS4011 stand, showing all dimensions in millimeters, including height range, VESA plate size, and base measurements.

9. Garancija in podpora

Garancija: This product comes with a legal warranty of 24 months for new products, as per European Union regulations.

Podpora: For any further questions regarding our products, please do not hesitate to contact us. Our support team will be happy to assist you.

E-pošta: support@ricoo.de

RICOO is a registered trademark in Germany, certified by the European Union Intellectual Property Office, ensuring proven quality and reliability.

RICOO TS4011